Question about 2007 BMW 335i Coupe

1 Answer

No display on my BMW 335

I have a BMW 335. I replaced the flashlight in the glove box with a BMW part that converts the flashlight outlet to a non switched cigarette lighter to charge my phone. I plugged a tire inflator into the adapter and blew a fuse. I now have no display on my I drive. If you've ever looks at the little symbols on the fuse location card behind the glove box you'll understand my frustration in trying to figure out which fuse controls this display. I would have thought it easy but no way. Can anyone help me identify which fuse(s) I might have blown.
Thanks,
JC

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 124 Answers

Go through all the fuses and you will find the defective one

Posted on Jul 28, 2009

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 182 Answers

SOURCE: Radio and cigarette lighter

You can pull the fuses one at a time and look at them.You will know the bad fuse when you see it.

Posted on Sep 03, 2008

James Chandler

  • 686 Answers

SOURCE: need a fuse diagram for a 1993 nissan altima-cigarette lighter

your cigarette lighter works off of a fairly high amp fuse check all your high amp fuses to be safe from 20 on up and chances are youll find the one. good luck

Posted on Jan 08, 2009

ginko

Ginko

  • 19396 Answers

SOURCE: cigarette lighter fuse

Click on the link below to open fuse map, it is fuse nr 2:

1993 - 1994 -1995 Fuse & Circuit Breaker Identification

Posted on Apr 05, 2009

ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: replace cigarette lighter

Review the section ZJ-Secc-8E-Instrument-Cluster-and-Gauges in the page 8E-5 you can find the graphics about this work.

Good luck!!!

Posted on Jul 21, 2009

Anonymous

  • 305 Answers

SOURCE: where can find the Cigarette Lighter fuse

there should be one under the hood/bonnet, this contains the aux fuses and aux relay's, it is a small black box, should be on the opposite side of the steering wheel position.( left hand drive ,it will be on right of car, and vice versa ).........

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HOW TO GET TO FUSE BOX UNDER GLOVE BOX ON 2003 BMW X5


  • You have to open the glove box and turn the two finger switches 1/4 turn.
    If the blower isn't working its probably not the fuse anyway. The part you need to replace is the fan speed resistor.

Aug 12, 2014 | 2003 BMW X5

1 Answer

Which oil to use in a BMW 120i 1 series m sport convertible


check your owners manual in your glove box it will be towards the back of the book

Aug 03, 2011 | BMW M Series Cars & Trucks

1 Answer

2000 bmw x5 nav screen blank. radio works but no


I know this is an old thread, but my 2006 325i Nav screen went bank also, but the radio still played. I noticed the glove box light and trunk light did not turn on also. I was told from mechanics is was probably a CID module for $2200, even though I mentioned the glove box and trunk light light were out and specifically inquired about a fuse. The mechanics never checked the fuses, because I checked my fuses in the glove box and found the fuse 61 marked with a BMW symbol that looks like light bulb was blown. The Nav screen started back up once the fuse was changed.

Feb 03, 2010 | 2000 BMW 5 Series

1 Answer

Cant find blower motor resostor on bmw station


you must remove glove box,remove lower cover below glove box, get under dash and use flashlight and you will see the fan resistor in the evap box, it maybe held in with a t 20 torx screw otherwise pull aside tab and pull out

Oct 16, 2009 | 2001 BMW 325

1 Answer

Are all codes on 2001 honda accords radios value


NO.

The follow will work on stock non-Navi system.

==

Clean out your glove box.

Use a flashlight and look for a 5 digits sticker one the left side of the glove box (CLOSER to the radio) or under the truck.

Enter the code with KEY ON (not starting engine) position.

Write this number down on the owner's manual for future reference.

Oct 09, 2009 | 2001 Honda Accord

1 Answer

My 2000 e46 bmw heater blower not working, i've checked the fuse


The E46 blower resistor is harder to remove than the E39 .
Open the Glove box.
Remove the three phillips screws across the top of the open box. Remove the two phillip screws that are deeper in on the sides of the open box(nine and three o'clock). Hard to see, use your flashlight. With these five screw removed remove the glove box. Disconnect the flashlight charger plug, and the glove box light connector. Pay attention to the wire routing. Remove plastic cover behind glove box. Locate motor and metal link to one of the a/c doors. Remove the metal arm from the plastic clip. Slide motor out and disconnect. There is an odd shaped black plastic piece with two T-20 or 25 Torx screws that need to be removed.Remove plastic piece. The Final stage is located behind the metal arm for the a/c door.R emove the floor heater duct for more room. You may or may not feel the need. If you wish pull on the leather extension to the center console outward until you hear a loud plastic cracking. Stop. Take a deep breath and know that you have broken nothing important Remove heater duct careful not to break the blend air door cam (white) and the lever connected to it (black).
You can pull that black lever out if you are patient. Back to the final stage now that you have more room. It is the component with the 5 0r 6 large gauge wires on the connector. Push back the black plastic clamp while pulling/wiggling on the connector.
The final stage should come out, then disconnect the connector. Reinstall all. Make sure the heater duct is installed properly if you removed it.

Sep 08, 2009 | 2001 BMW 325

1 Answer

Where is main fuse panel in 3 series bmw convertible


Access the fuse panel in the glove box by turning the nylon retaining clips inward 90 degrees until the panel drops down.

Jul 04, 2009 | 2001 BMW 3 Series

Not finding what you are looking for?
2007 BMW 335i Coupe Logo

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

auntyjack

Level 2 Expert

104 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Frankie B

Level 2 Expert

70 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...