Question about 2007 Kia K2700 Workhorse

1 Answer

Kia k2700 tappet clearance

Tappet settings

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 5,914 Answers
Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Lee Glascock

  • 384 Answers

SOURCE: What causes 15amp eng fuse to blow as soon as I change it , on kia k2700 diesel 2006

a short to ground pull pos cable off battery load test battery if good ,l\follow power back to fuse box looking for breaks pinches or other things that would cause a short. Look where the wires go throught the cab , make sure the fuse block bolt is tight if it has one . look for hot spots in fuse block repair as needed good look around any place that power is run to it

Posted on Dec 12, 2014

Bill Boyd

  • 53755 Answers

SOURCE: How do I set the valve clearances on a kia 2700

hydraulic followers should not need adjustment as it is automatically done by the oil pressure in the followers.

Posted on Dec 20, 2014

tony moore

  • 29 Answers

SOURCE: Kia k2700 bakkie

check YouTube someone may have a video on step by step instructions for your year make and model of car

Posted on Jan 17, 2015

emissionwiz

Marvin

  • 85206 Answers

SOURCE: kia K2700 makes noise like a drum after i changed pistons ; rings and bigend bearings. i also changed cylinder head but using old injectors

I would need to hear the noise to have any chance of guessing as to where it is emanates from.

Posted on Oct 28, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the tappet settings on a 1200 toyota corolla 1980 model bakkie


It will be the same as for the 1200 on any other Toyota, i.e. Pulsar etc. If you have 10 thou on the intake and 13 thou on the exhaust set while hot, you are withing range.
We used to say a ticking tappet is a happy tappet, so don't try to eliminate all noise from the tappets, just set them so they don't kill all conversation in the cab.

Apr 03, 2015 | 1980 Toyota Corolla

1 Answer

How to put timming in on kia 2,5 1ton trok


Do you mean Set the timing on a Kia K2700 truck?

Mar 04, 2015 | 2007 Kia K2700 Workhorse

1 Answer

What is the tappet setting for the KIA 2700 truck?


for the K2700 II 2.5 TCi 2004 - 07 engine code D4BH it is inlet 0.15mm cold and exhaust is the same 0.15mm cold. for the K2700 II 2.7D 2004 - 08 Engine code J2 it is inlet 0.30mm cold and exhaust is 0.38mm cold.

Dec 24, 2014 | Kia Cars & Trucks

1 Answer

Tappet settings for 1980 Hino am100


go on the net or contact your local service dealer, but for most diesels that do not hydraulic tappets the setting standard is .012" inlet hot and .014" exhaust hot. Make sure that the setting is required as tappet noise can be from work rocker bushes and shafts

Oct 01, 2014 | Cars & Trucks

1 Answer

3 1 tappets


if you just had this overhauled from a shop and this is happening you have warranty go back to the people that rebuilt it and have them honour their warranty. if you built it and you did the entire engine and not just the bearing, then check the oil pressure you may have bad lifters or cam or cam bearings causing not enough pressure.

Aug 27, 2014 | 2007 Kia K2700 Workhorse

1 Answer

Citreon saxo tappet clearance


You didn't mention what year so if the vehicle is early then standard settings are .010"inlet hot and .012" exhaust hot. If late model it will have hydraulic tappets. which are self adjusting

Aug 15, 2014 | Cars & Trucks

2 Answers

HOW TO DO TIMMING FOR KIA K2700 WORKHORSE


ALIGN THE TIMING MARKS AS PER THE ATTACHED FOTO. on the gears there are timing marks.
timming-kia-k2700-workhorse-bm2ho3s54k4dok42ylsl0luo-2-0.jpeg

Jun 21, 2014 | 2007 Kia K2700 Workhorse

1 Answer

Valve setting for kia k2700


Best thing to do is get a Haynes manual
for that car the valve clearance settings will be
in the book an make sure car in warm when setting
doing it this way you get facts an not
opeions

Jun 01, 2014 | Cars & Trucks

1 Answer

Valve clearance for kia k2700


You should call a Kia dealership and speak with a mechanic. He can look it up for you.

Mar 28, 2014 | Kia Cars & Trucks

Not finding what you are looking for?
2007 Kia K2700 Workhorse Logo

Related Topics:

682 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...