Question about Chevrolet Silverado 2500

Open Question

What are the torque specs on a 97 chevy 3/4 ton

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 379 Answers

SOURCE: Looking for the torque specs for 1998 chevy astro van?

1998 chevy astro 4.3 v6 torque specs include :
* foot pounds *
balance shaft (if equiped) gear bolt = step 1 = 15 ft.lbs. step2 = additional 35 degrees.
camshaft sprocket bolt = 18 ft. lbs.
connecting rod cap = step 1 = 20 ft. lbs. step 2 = additional 70 degrees.
crankshaft damper bolt = 74 ft. lbs.
crankshaft oil deflectorbolt/nut = 27 ft.lbs.
cylinder head bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees. (tighten in sequence)
2811243.jpg


exhaust manifold bolts = step 1 = 11 ft. lbs. step 2 = 22 ft. lbs.
flywheel bolt = 74 ft. lbs.
main bearing cap bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees.
oil filter adapter bolt = 15 ft. lbs.
oil pan bolt/nut = 18 ft. lbs.
oil pump bolt = 66 ft. lbs.
rocker arm with press in studs = 18 ft. lbs.
rocker arm with screw in studs = 19 ft. lbs.
valve lifter retainer bolt = 12 ft. lbs.
water pump bolt = 33 ft. lbs.
* inch pounds *
balance shaft retaining plate bolt = 106 in. lbs.
camshaft retainer plate bolt = 106 in. lbs.
front cover bolt = 106 in. lbs.
intake manifold upper = step 1 = 44 in. lbs. step 2 = 88 in. lbs.
intake manifold lower = step 1 = 27 in. lbs. step 2 = 106 in. lbs. step 3 = 133 in. lbs. ** (tighten bolts in sequence)

cbb8861.jpg

thanks for your vote !

Posted on Dec 28, 2008

Ad

Anonymous

  • 17 Answers

SOURCE: I need the torque specs and sequence on a 1998 chevy 350 vortec

Vortecs are a little different that old school small blocks, grab a Haynes or Chiltons, the cross patterns and specs are simply diagramed. Vortec, as any really, start with 25# then 45# and then final torque which I believe is around 70-75# but to be sure verify with the manual. AutoZones, Murry's, Adavance auto all carry the books, Cheap insurance.
Dan

Posted on Apr 25, 2009

GIVHRR

  • 72 Answers

SOURCE: Front Hub Bearing Torque specs to complete replacement

THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Posted on May 09, 2009

SOURCE: need torque specs for a 85 s10 chevy with a 2.5 engine?

here you go!

1dd4f4a.gif93a64e1.gif

Posted on Jun 21, 2009

Anonymous

  • 1 Answer

SOURCE: torque specs

2005 Chevy 1500 4x4 front hub bearing assembly, what is the torque spec

Posted on Jun 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs on flywheel 92 chevy 2500 truck 3/4 ton


You can try calling your local Chevy dealership (parts or service dept); buy a service/repair manual book or e-download, or join a Chevy truck online forum; engine size detail may be helpful.

Feb 18, 2017 | Chevrolet 2500 Cars & Trucks

1 Answer

What is the torque on a 97 Chevy Lumina 3.1 Liter Engine


it has to be done in stages, if you go to the autoparts store you can get a book for your car and it will give you the specification for the torque specs and sequence and any other that you need

Dec 19, 2016 | Cars & Trucks

1 Answer

What is the torque specs for the lug nuts on a 1983 chevy silverado 1 / 2 ton 4x4.


80ftlbs for aluminum and magnesium rims, 85ftlbs for steel.

May 09, 2016 | Cars & Trucks

1 Answer

What's the cylinder heads torque spec for a 97 chevy malibu 3.1 engine


Please refer to the following "GM Tech Solutions Guide" on the Head bolt torque procedure for the 3.1 and the 3.4 V6 engines, Follow the link please.

http://www.enginebuildermag.com/Content/Site302/Articles/02_01_2010/7116825GMLayout_00000029225.pdf

Mar 26, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

What is the torque setting for the valve covers on a 327 chevy engine? Its on a 1967 Chevy Impala but not original motor. Thanks!


The torque spec on the valve cover bolts is 3 ft pounds or 36 inch pounds.
This spec is good for all Chevy small blocks.

Jul 22, 2010 | 1983 Chevrolet Impala

1 Answer

What is the torque trquirement for the 1975 chevy 1/2 ton SB truck. there are 6 bolts on each side.what is the torque setting for the upper and lower control arms on sam truck?


For the upper:

  1. Installation is the reverse of removal. Before tightening the nuts to 70 ft. lbs. (95 Nm) for 1/2 ton trucks, or 105 ft. lbs. (142 Nm) for 3/4 and 1 ton models. Have the front alignment checked, and adjusted.

For the lower:

Tighten the U–bolts to 45 ft. lbs. (61 Nm) for 1970–75 1/2 ton trucks, to 110 ft. lbs. (149 Nm) for 3/4 and 1 ton models; all other trucks tighten to 85 ft. lbs. (115 Nm). Have the front suspension alignment checked.

Mar 07, 2010 | Chevrolet 1500 Cars & Trucks

1 Answer

Replacing front hub on a 2001 Chevy Silverado 1/2 ton 4 x 4. need to know torque for retaining nut


The torque for the front drive shaft and hub retaining nut is 155ft.lbs. But if you are on the metric system,
it's 210N.m . These specs are for both 1999 and 2001
Hope this helps. Good luck.

Jan 24, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

I need the torque specs and sequence on a 1998 chevy 350 vortec


Vortecs are a little different that old school small blocks, grab a Haynes or Chiltons, the cross patterns and specs are simply diagramed. Vortec, as any really, start with 25# then 45# and then final torque which I believe is around 70-75# but to be sure verify with the manual. AutoZones, Murry's, Adavance auto all carry the books, Cheap insurance.
Dan

Nov 19, 2008 | 1998 Chevrolet C2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...