Question about 1999 Chevrolet Tracker

Open Question

2000 big bear 400 cuts out when i accelerate - 1999 Chevrolet Tracker

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I need the big end torque on the Rocam engine please

A cheap shop manual will have this and much more. If you are in this deep you probably need one.

Sep 05, 2016 | 2000 Ford Ka

1 Answer

Dursngo sounds like a valve or rod when acelerate and running bad

If it knocks heavy under acceleration it will be a big end first or a main second. Disconnect each plug wire until there is no knock under acceleration and that will point to the piston and big end that is faulty. Remove the sump and that big end bearing and if the crank is still good replace the bearing. As you cannot get a single bearing shell then it may be a good idea to replace all the big ends . On the back of the shell will be the size of the bearing in thousands of an inch so if it says .002" then you need shells that are that much over size. Take a shell into a spares department and just ask for bearings that match that shell.

Jan 22, 2014 | Cars & Trucks

1 Answer

Passat 1.9 tdi 116 ch 2000 engine ticking/knocking noise

Are the pieces aluminium? Piston. Steel? rings/oil pump etc or white metal? big ends.

Apr 11, 2017 | Volkswagen Passat Cars & Trucks

1 Answer

2001 S-10: 2000 s10 extreme, accelerating is fine, when I let...

Usually if there is a howl on acceleration from the rear it's the big pinion bearing,if the howl is on deceleration it's the small pinion bearing.(the pinion shaft with these bearing is the one in the diff that the driveshaft attaches to)

Feb 21, 2018 | 2001 Chevrolet S-10

1 Answer

Remove the Center Support Drive Shaft Bearings

use a cutting wheel and cut through the bearing as far as you can without damaging the drive shaft.Then get a big hammer and a chisel drive the chisel into the cut and break the bearing.

Jun 25, 2009 | 1983 GMC S-15 Pickup

1 Answer

L Reg Vitara engine knock

if anything id say it was the bearing

Jul 06, 2008 | Suzuki Vitara Cars & Trucks

Not finding what you are looking for?
1999 Chevrolet Tracker Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides