Question about 2005 Chrysler Town & Country
6 disc dvd player wont eject dvds or play them, it keeps cycling thru each disc. Assuming one is stuck
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
needs a new disc changer. Something is wrong internally. You will be able to get them back if you go to the dealership and get an exchange unit. They will send the discs back when they remanufacture the unit.
Posted on May 30, 2009
Disclaimer: I am not a professional. This is an account of what I did to replace my DVD changer. If I had been offered the $450 installed option, I would have taken it.
According to the boys at Car Toys and the dealer, once these DVD changers go, they have to be replaced. The dealer quoted me $705, but I found one on E-bay from a highly rated seller for $400. I was able to pull out the DVD changer by popping off the trim betwee the DVD player and the cup holder, and then removing two screws. Note that it may help to remove the cup holder.
Once those two screws at the bottom are removed, it just takes a firm tug on console shell below the DVD player for the whole face of the console to come off. Disconnecting the airbag indicator connector will allow the console face to be pulled far enough away to get at the DVD changer. All connectors have a tab you need to press while pulling.
Two more screws need to be removed to get the DVD changer out. With those screws removed, another firm tug and wiggle will release the DVD changer. You'll probably hear a metal popping sound, which is just the rear grounding tab (I think that's what it is) pulling free from the cage.
Once you can reach the two wiring harnesses behind the DVD changer, pull on the wire bundle to give yourself some slack to work with, while not stressing the cable assemblies too much. Disconect the two connectors at the back of the DVD changer. At that point the DVD changer can be removed, and you can search on E-bay for the part number. My unit had a complete wiring diagram for the two connectors on the sticker, but I couldn't find anyone with the right connectors to install an aftermarket system.
I haven't received the new part yet, so I'm a little nervous about the correct order of connector installation. I'll probably pull the battery terminals while installing the new unit, but here is where you are on your own. Good luck.
Posted on Sep 16, 2009
first check to see if the dvd slipped into the player incorrectly.. my child inserted a dvd into the player. it went onto of the slot.. i took a butter knife to slip the dvd out, of course messed up the dvd but was able to get it out.. if not you can open up the player and get it out not very hard. hope this helps good luck
Posted on Nov 13, 2009
Tips for a great answer:
Dec 25, 2015 | Nissan Cars & Trucks
Jun 01, 2014 | 2005 Chrysler Pacifica
Mar 01, 2014 | Cars & Trucks
Aug 31, 2012 | 2005 Chevrolet Uplander
Aug 31, 2010 | GMC Yukon Cars & Trucks
Nov 14, 2009 | 2004 Nissan Armada
Oct 14, 2008 | 2003 Lincoln Aviator
Jun 27, 2008 | 2007 GMC Sierra Classic Denali
658 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: