Question about 1990 Ford Bronco II

2 Answers

Can the glass in the tailgate be replaced?

A rock from a mower shattered the tailgate glass. Can the glass be replaced in a 1990 Ford Bronco 2? I have another tailgate but would like to know how to take out and replace the glass without breaking[hopefully].

Posted by on

  • Cheryl
    Cheryl Oct 11, 2014

    Sprayed heavy duty silicone on the gasket for several days. Used a street sign made into a paddle[been in my possession more that 20yrs] it came out without cracking or breaking. Taped up the broken window and removed it.

  • Cheryl
    Cheryl Oct 11, 2014

    The window went in the gate without an issue.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

You need two people to take the tailgate off but you have to undo the struts and itll pop off after that i would take the plastic off the inside panel or you could use a ranger tailgate can cut the b2s in have and get some new glass... ive it done it before makes things easier but little more complicated to put in... but you just need some rubber stripping, heat gun and time if you want more insturctions go to broncoiicorral.com

Posted on Jul 30, 2014

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Ford Master
  • 2,548 Answers

I think they are fitted with a sealant.

Posted on Jul 29, 2014

  • Richard Warren
    Richard Warren Oct 16, 2014

    might be best to get windscreen place to install it .

×

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 59 Answers

SOURCE: replace motor on tailgate window on a 1987 ford bronco

You will likely have to remove the panel from the inside with the window up. Once you have the panel off I would try to have some one hold down on the switch while you tap the motor with a hammer. Of course make sure the latches are all the way closed as if the door is not closed all the way the window will not roll down as it has safety switches to keep this from happening.

If you still can not get it down then you will need to unbolt the regulator and let it down that way.

Posted on Feb 23, 2009

BILL RICHARDSON

  • 508 Answers

SOURCE: remove dashboard on a 88 ford bronco 2

You don't need to remove the dash. Look under the dash where the switch is located. on the side of the switch you will see a small button to push in. While pushing in on the button pull the knob as though you were going to turn the lights on. At this time the stem should release from the switch. Undo the bezel and drop the switch down so you can see to unplug the wires. Replace wires to new switch and reverse the procedure to install. You don't need to push the button in when replacing the stem.

Posted on Feb 07, 2009

Coss

  • 1056 Answers

SOURCE: 2006 Mustang GT Convertible

The rear window for that top is a seperate curtain.
Replacement is best left to a professional.
You should cantact an automotive trim shop (upholstery) for them to quote it.

The way it is replaced, you have to take the top loose, roll it forward, replace the window curtain, reinstall the top. Depending on the condition if the top, it may need replacement also. That is best determined by the shop that does the work.
This is not recommend as a DIY project. I worked in a trim shop for years, and they are not easy.

Posted on Oct 18, 2008

Anonymous

  • 1 Answer

SOURCE: 1988 ford bronco 2 break problems

i replaced my rear lines from the master cylinder to the adapter by the rear axle and that seamed to help me. you probably have a leak somewhere.

Posted on Aug 01, 2009

Anonymous

  • 1 Answer

SOURCE: Fuse panel diagram for 1990 ford bronco 2

Here's the diagram for the fuse panel under the dash. There is also a fuse panel under the hood next to the air filter.e589aae.jpg

Posted on Jan 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove tailgatein 89 Bronco


A Bronco tailgate comes off the same as a regular pickup truck. Open the tailgate and remove the cables from both sides. Lift up the passenger side of the tailgate and then slide the driver side towards the passenger side.

Apr 25, 2014 | Ford Bronco Cars & Trucks

1 Answer

Tailgate window will not go up on 1996 ford bronco. checked all? elec did the bypass. have 12volts up/dwm. how does glass come off retaining bolts


Glass should just slide out, get a bit of warm soapy water to help loosen seal. But first check that sliders a free from dust and or something obstructing glass from moving... remove inside panel and look for something that might be preventing the upward movement, if nothing, disconnect the electric motor from ARM, to see if it works without the load, the motor might be burnt out, all the best
Ian

Oct 27, 2010 | 1996 Ford Bronco

2 Answers

Parts question


I don't know if your talking about a big bronco or a bronco ll. I'm really not sure about the difference in sheetmetal, you may have to take off the old door & match it up with the replacement door. As for the windows and locks, as long as both doors had power locks & windows, make sure the replacement door still has the window glass in the door assembly. You may want to take the time & test the motor on the new door, finally make sure your wires will connect with replacement door.

Jul 06, 2010 | 1990 Ford Bronco

1 Answer

Rear window on my 1987 ford bronco will not work


This has several possiblilitys, it could be the switch in the dash has gone out even if it does not work with the key in the tailgate. other possible item could be the window motor or a sensor that detects if the gate is up or down. check motor wires for power when the switch is activated by pulling off the panel on the tailgate, if it is getting power i would suggest replacing the motor. if not you may have to trace wires to the drivers side of the tail gate and find the sensor.i had to by pass mine a while ago. makes it much easier to clean the glass on the inside cause the window will roll up with the gate down.

May 10, 2010 | 1987 Ford Bronco

1 Answer

Need wiring diagram for 1990 bronco tailgate


I am assuming you need the window wiring
c1ce5c7.jpg

Mar 16, 2010 | 1990 Ford Bronco

1 Answer

Tailgate regulator...can't get to it because window is down


open the tailgate... pull the window up with your hands, and take out the gear. its a round plastic gear and i had the same problem... mine was completely shattered and its about 12 bucks to replace

Apr 15, 2009 | 1990 Ford Bronco

2 Answers

I NEED TO FIND A REPLACEMENT TAILGATE FOR A 1994 BRONCO


You can try National parts depot, or Original parts groupe, They might have what your looking for. They all have on line catalogs.

Mar 28, 2009 | 1994 Ford Bronco

2 Answers

Rear Window in 1990 Ford Bronco


you could run a 3 way switch of some kind. but i would try looking in the access panel and finding the safety switch either right on the bottom of the handle or the drivers side tailgate latch. they are known to go bad.you can replace it but i pulled mine out and jumped it with a piece of wire works fine now

Feb 28, 2009 | 1987 Ford Bronco

5 Answers

Rearwindow/ door


if there are no broken wires inside the tailgate try lubing the latches with WD40 and open and close the tailgate several times. If the latches are properly closed on both sides the window will not work

Nov 29, 2008 | 1990 Ford Bronco

1 Answer

Tailgate window motor


You must detrim the tailgate and then remove the glass and then the entire regulator assembly must be pulled to change out the motor.

Nov 21, 2008 | Ford Bronco Cars & Trucks

Not finding what you are looking for?
1990 Ford Bronco II Logo

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...