Question about 1993 Geo Metro

1 Answer

How do i remove the stock radio from my 1993 geo metro 4 door hatchback

I have removed trim around radio and radio face plate but cant get unit out

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Geo Master
  • 20,706 Answers

Here is the online fsm quote

  1. Disconnect the negative battery cable.
  2. Open the glove box. Remove the glove box open panel.
  3. Remove the air conditioning switch connector and heater control unit lever knobs. Pull heater control unit cover plate from instrument panel.
  4. Remove the gearshift control lever upper boot and center console.
  5. Remove the ashtray.
  6. Remove the instrument panel center trim bezel and radio face plate.
  7. Remove the screw from the back of the radio receiver and the screws from the front face of the radio.
  8. Remove the radio.

Posted on Oct 08, 2014

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 398 Answers

SOURCE: 1993 Geo Metro Automatic 4-door Hatchback

For a car this old I suggest you check the used auto parts places in your community. This car is 15 years old, and it would be almost impossible to find a new one.

Posted on Sep 01, 2008

wekjo

  • 3911 Answers

SOURCE: I have a 1992 geo metro LSI convertable that is

they have junkyards for that. there are many people on ebay who will go out and scavenge parts for a price. tough to find a car more then 15 years old though.

search for used geo parts on ebay, find someone who has a lot of them for sale and send him a question about finding you one and how much.

or you can just get your phone book out, find the auto used parts section and call them all until you find someone with an old geo sitting in his yard that you can go look at.

Posted on Jan 21, 2011

randallharre

Randall Harrell

  • 94 Answers

SOURCE: I have a '93 Geo Metro in need of driver door panel and window trim for same. Are '95 interior parts compatible?

Yes. 93 to 98

Posted on Jan 13, 2014

Testimonial: "Thanks! My Metro may get finished after all."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removed all screws from my geo metro radio.cant find anything holding it.won't come out


Hi,

Normally there is another screw or connections towards the back. Under the steering wheel, remove the panel near the stereo. Also, remove the panel on the right side as well. This will give you access to the rear of the stereo and you will see another screw.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/laura_08254539050d64db

Jul 29, 2016 | Geo Cars & Trucks

1 Answer

How do i remove a radio from a 1993 suzuki sidekick


well thats in the FSM. easy peasy
stock radio , we cant do non stock. (vast )
i guess step 4 is it?

heater control page.
  1. Disconnect the negative battery cable.
  2. If equipped, disable the air bag system. (skip)
  3. Carefully pull the knobs off of the control levers.
  4. On Sidekick, Tracker, Sidekick Sport and X-90 models, grasp the trim panel and pull it off of the instrument panel.
  5. stop.... here.
radio out
electronic version not analog
remove ash tray, and hidden tray screw and tray guide

  1. Pull the heater control lever knobs off of the levers.
  2. On 1996-98 models, separate the heater control trim panel from the control unit by pulling it straight away from the instrument panel. Allow the trim panel to hang loose.
  3. Open the ashtray, then depress the ashtray retainer and remove the ashtray from the sliding track. While it is removed from the vehicle, now would be a good time to wash it out.
  4. Loosen the two retaining screws, then remove the ashtray track from the instrument panel center trim bezel.
  5. On 1989-95 Sidekick and Tracker models, remove the trim panel (Bezel) by prying it carefully away from the instrument panel.
  6. On 1996-98 models, remove the center trim bezel from the instrument panel by loosening the four retaining screws and maneuvering the heater control trim through the appropriate hole. Set the bezel out of the way.
  7. Use a screwdriver to loosen the one rear mounting bracket-to-radio screw; access can be gained to this screw through the ashtray hole.
  8. Remove the four radio front retaining screws, then pull the radio out of the instrument panel just far enough so that the electrical connections on the rear of the radio can be accessed.
  9. Detach and label the wiring from the radio. Also, detach the antenna cable from the rear face of the radio
  10. pull radio. now. (if stock if not stock look for locks)


step 5
25477768-tiechxycrusckuccgw3t0yzs-2-0.jpg

Feb 25, 2015 | 1993 Suzuki Sidekick

1 Answer

How do i replace the license plate light on a 93 geo metro


this is in the operators guide. (get one?)
R&R
  1. Disconnect the negative battery cable.
  2. Remove the screws from the license plate lamp assembly.
  3. Remove the license plate lamp assembly.
  4. Remove the socket from the lamp assembly.
  5. Remove the bulb from the socket.
  6. Installation is the reverse of removal.

Feb 04, 2015 | 1993 Geo Metro

1 Answer

Need a radio wiring diagram for a 1996 geo metro


this is on all real forums, metro swift , if stock radio.
i think you meant stock metro radio harness right?
also all cars stores have the adapter with same. drawing.
http://www.fixkick.com/swift.html

alldata.com has it too.







Jan 01, 2015 | 1996 Geo Metro

1 Answer

Doors won't lock


Geo radio info....Text test; I was not able to type in any info due to an error message I was receiving on the other site, so I am answering on this old posting you have also. "Invalid text" error message was displayed, and I was only able to post a period character, not words. Not sure why this is happening.

Removal; Open the glove box and remove the glove box panel
Remove the air conditioning switch connector and heater control leber knobs.
Pull heater control unit cover from the instrument panel.
Remove the gear shift control lever upper boot and center console.
Remove the ash tray.
Remove the instrument panel center trim bezel and radio face plate.
Remove the screw from the back of the radio eceiver and the screws from the front face of the radio.
Remove the radio.

Reverse procedure for installation.

Nov 21, 2010 | 2001 Dodge Grand Caravan

1 Answer

Car radio removal


remove dash face plate around radio there will be small screws or studs with nuts around the sides of radio attached to a mounting plate. Unhook wire harness on radio and pull from dash

Mar 02, 2010 | 1995 Geo Prizm

1 Answer

Dash board is digital and the dash lights went out seeking information on how to remove the dash board console 1993 chevy blazer tahoe LT


Remove the 5 mounting screws from the instrument cluster trim plate and remove the trim plate. Remove the 4 mounting screws from the instrument panel face plate and remove the face plate.Remove the instrument light grid from the center of the cluster. From behind the instrument cluster reach behind the speedometer and disconnect the speedometer cable by releasing the tab. Pull the cluster forward just enough to detach the "check engine" light bulb from the center of the cluster. Remove the instrument cluster from the dashboard.

Jan 13, 2010 | 1993 Chevrolet S-10 Blazer

1 Answer

How do i get the dash off to pull the old radio out


I'm not totally sure about the La Sabre, but there should be trim screws that hold the Dash face plate in place. There are three on the top portion of the face plate, and I think three on the bottom . The face plate extends from Light switch on left to radio on right. You may have to tilt the steering wheel column down to remove the face plate from around the steering wheel. From what I remember, the only thing that needs to be unplugged from the face plate is the plug for the rear defroster. Also, there are clips that hold the face plate in place. They just push in and out. Once the face plate is off, you can get to the radio mounting screws.











Aug 16, 2009 | 1993 Buick LeSabre

1 Answer

1993 GEO METRO


remove steer wheel with puller. u will see black cover remove 3 tork screws.remove. next u will need a special tool push down on plate . remove clip in center. remove plate. lift turn arm . remove bolt for lock cly. turn key lock will slide out

Nov 29, 2008 | 1993 Geo Metro

1 Answer

1993 Geo Metro Automatic 4-door Hatchback


For a car this old I suggest you check the used auto parts places in your community. This car is 15 years old, and it would be almost impossible to find a new one.

Aug 29, 2008 | 1993 Geo Metro

Not finding what you are looking for?
1993 Geo Metro Logo

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...