Question about 2003 Dodge Caravan

1 Answer

03 caravan flywheel torque specs foot pounds?

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 881 Answers

Set to 35 ft/lbs then again at 60 lbs.

Posted on Feb 16, 2015


6 Suggested Answers



Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 6 Answers

SOURCE: torque specs for the main rear seal on a 2000 dodge caravan???

i am the owner of Alexander's Garage yu may contact me at 717-242-1749.

Posted on Feb 22, 2010


David Levy

  • 120 Answers

SOURCE: What's the torque specs on

101 lbs for manual trans nv5600(bolts to crank)...sounds high but thats what 2 books say

Posted on Nov 20, 2010

Jonah Oneal

  • 14092 Answers

SOURCE: just need to know flywheel


Posted on Mar 11, 2011

Donald Tucker

  • 492 Answers

SOURCE: have 97 caravan 3.3 and this link will have the pdf file for your engine.

Posted on Apr 20, 2011



  • 11 Answers

SOURCE: torque specs for water pump

105in. lbs

Posted on Jun 24, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I need the torque specs for flywheel to crankcase bolts,97 geo tracker sport, convertible

Manual Transmission flywheel torque is 58 Ft pounds. Automatic flex plate is 47 Ft Pounds.

Apr 21, 2016 | Geo Cars & Trucks

2 Answers

Torque Peugeot 206

You will find all the torque specs for your car in the factory repair manual.

Dec 13, 2015 | Peugeot Cars & Trucks

1 Answer

On a 2003 3.8 ford windstar what is the torque lbs for transmission

I can't seem to find those specs. I use an impact gun on them. The flywheel is 70 foot pounds, so I would go between 70 and 100. I'm sure my gun puts out 100+ foot pounds.

Nov 07, 2015 | Ford Cars & Trucks

1 Answer

Cyl head torque specs focus 1.6 LX 07

cylinder head and main bearing bolts had a first step torque of 50 to 60 foot-pounds and a second step torque of 80 to 90 foot-pounds each. The rod bearing bolts had a first step torque of 25 to 30 foot-pounds and a second step torque of 30 to 36 foot-pounds. The intake manifold and exhaust had a first step torque of 5 to 7 foot-pounds. The intake manifold had a second step torque of 14 to 21 foot-pounds while the exhaust manifold had a second step torque of 16 to 23 foot-pounds.


May 25, 2012 | Ford Focus Cars & Trucks

1 Answer

What is the torqe specs for a 1997 subaru legacy flywheel?

The bolts that attach the flywheel to the engine should be torqued to 51 to 55 foot pounds.

Jul 24, 2011 | Subaru Legacy Cars & Trucks

2 Answers

What is the foot pound torque for the wheel nut on a 1991 F-150?

The foot pound torque is 100 foot punds for the lug nuts.

Apr 02, 2011 | Ford F-150 Cars & Trucks

1 Answer

2006 grand caravan sxt 3.8 liter outer tie rod torque specs needed please.

Hello billmarks: My name is Roger and I will help you. The torque specs for the tie rod lock nut and the tie rod spindle nut is 55 foot pounds. Should you need further help please just ask.Please rate the answer. Thank You for using Fix Ya. Roger

Sep 08, 2010 | 2006 Dodge Grand Caravan

1 Answer

What is the torque specs on a 1990 nissan pathfinder cluch.

If you are talking about the pressure plate to flywheel bolts, the torque is 16 to 22 foot pounds.

Feb 14, 2010 | 1990 Nissan Pathfinder

1 Answer

Bolt torque specs for flywheel, pressure plate, bell housing bolts for 97 Nissan maxima

1.Flywheel - 61 to 69 Foot Pounds
2.Pressure Plate - 25 to 33 Foot Pounds
3.Bell Housing - No specs found. I would say 25 to 35 foot pounds should be sufficient.

Bolts clean on ->flywheel to crank, ->pressure plate to flywheel, and ->bell housing to back of engine, I would use TWO drops of Loctite Red threadlocker, on ALL of these bolts.

Hope you have an alignment tool for your clutch disk when you install it. Auto parts stores sell the plastic one's cheap! Saves a LOT of headaches!

Tighten the pressure plate EVENLY! Snug the bolts down until they just TOUCH, then go in a criss-cross pattern when tightening. Do the tightening in incremental stages! You turn one bolt one thread, you go across to the opposite side, and turn that bolt one thread. Keep criss-crossing so the pressure plate goes down EVENLY. (YES, it's a pain in the keister!)

If NOT, you'll have a warped pressure plate, and it will be junk!
Thanks for letting me say that, I feel better.

Jul 07, 2009 | 1997 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides