Question about 2005 Ford Explorer

1 Answer

Need torque specs, for 2005 ford explorer. upper and lower strut bolts and for aluminum rims. thank you

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Ford Master
  • 531 Answers

2 lower bolts/nuts from the strut to the knuckle should be about 85 ft lbs

the top center nut that holds the strut assembly to that bearing plate assembly should be 76 ft lbs (with the use of a spring compressor of course!)

wheel lug nuts should be torqued to 98-100 ft lbs

Posted on Mar 16, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 ford explorer Manual trans. 2 door 6 cyl. 2 wheel drive repair diagrams


As per what you requested Transmission to engine bolts: 35 lb-ft (E/MWM).

But if you need more torque specs for other parts of your vehicle.I suggest you to check the link below with complete torque specification list and helpful diagrams.
http://www.allcarhelp.com/2016/05/torque-specs-for-bolt-size-of-bolts.html
This will help.
Thanks.

May 08, 2016 | 1996 Ford Explorer

1 Answer

Upper ball joint torque specs 2002 explorer xls 4x4 4.0L v6 gas


Douglas, 90 lb-ft is ball joint nut torque.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Install Upper Control Arm and Ball Joint 2002 05 Ford Explorer...

Apr 02, 2016 | 2002 Ford Explorer

1 Answer

What is the torque specs for brake calipers on a ford explorer sport front calipers


  1. Torque Specs For F250 Caliper Bolts - Diesel Forum - TheDieselStop.com

    www.thedieselstop.com > ... > 1999-2007 General Questions Jan 13, 2009 - 3 posts - ‎1 author
    Does any one know what the caliper bolts torque specs are? ... Disc brake caliper pin bolts - Excursion, F-250/F-350 with Ford and Dana axle ... Torque specs for front brakes
    5 posts
    Mar 12, 2009
    05 F250 brake torque specs please
    6 posts
    Aug 22, 2007
    Brake caliper torque specs
    5 posts
    Jul 14, 2007
    Front brake Caliper Bolt Torque
    6 posts
    Apr 25, 2005
    More results from www.thedieselstop.com

Jul 11, 2015 | 1998 Ford Explorer

1 Answer

Torque specs for upper and lower strut bolts and for aluminum wheels. Thank you


What is the Car Year Make and Model? Are they Factory Wheel? if not check with the after market rim supplier and rim size.

Mar 15, 2015 | Cars & Trucks

1 Answer

What is the torque specs for 2005 durango slt 4x4 ball joints upper lower and brake bolts


60 foot pounds for the ball joints and 30 foot pounds for the brakes. This is nominal. I use a impact gun on thee. No torque specs. Brake bolts, just take it easy on them.

Feb 28, 2015 | 2005 Dodge Durango SLT

1 Answer

Change rear gas struts on 98 Buick Lasabre


No, it isn't...
You need:
-20" breaker bar
-torque wrench
-Liquid wrench (or WD-40 if you don't have any)
-Jack and stands
-sockets to fit all of the connections

1. Remove the back seat:
Bottom cushion comes out by pushing it rearwards and lifting, undo the 2 seatbelt bolts and 2 push nuts and remove the back cushion

2. Jack and support the frame of the car
3. Remove the wheels
4. Place a jack under the control arm where the spring connects to it and put a little tension on the spring. (this is so that when you unbolt the strut the control arm won't come crashing down)
5. Remove the air tube by rotating the spring clip 90 degrees and pulling on the tube at the connector.
5. Remove the lower strut bolts. (Exprerience shows me that removing the lower one first will save you lots of agony...)
6. Remove the two strut mounting bolts that are behind the back seat cushion.
7. Compress the strut and remove from the vehicle.
8. Installation is opposite of the removal. Remember to use a new mount if the one you are removing is worn. I recommend Quick-strut 171798. Good Luck!

P.S. Torque Specs are:
Lower Strut bolts- 140 ft/lbs
Upper strut bolts- 30 ft/lbs
Mount to strut bolt - 70ft/lbs

Dec 22, 2009 | 1998 Buick LeSabre

1 Answer

I am replacing the rear struts on my 98 toyota xls


upper nuts 36 lbs and the bottom two big ones are 145 lbs and the upper mount to body are 29 lbs. good luck man

Oct 18, 2009 | 1998 Toyota Avalon

1 Answer

Intake torque specs


Upper intake

Stage 1: Tighten to 20 Nm (14 lb-ft).
Stage 2: Tighten to 25 Nm (18 lb-ft).


Lower intake

Stage 1: Tighten to 15 Nm (11 lb-ft).
Stage 2: Tighten to 32 Nm (24 lb-ft).


Rocker Arms

Stage 1: Tighten to 10 Nm (89 lb-in).
Stage 2: Tighten to 32 Nm (24 lb-ft).

May 17, 2009 | 2000 Ford Windstar

1 Answer

I need the rear shock torque specs for a 2007 sport trac


Torque Specifications Description Nm lb-ft lb-in Brake caliper bolt 32 24 — Brake disc shield bolt 8 — 71 Fuel tank filler pipe bracket bolt 15 11 — Fuel tank filler pipe hose clamps 3 — 27 Halfshaft nut and washer 275 203 — Lower arm inboard bolt 250 185 — Lower arm outboard bolt 275 203 — Parking brake cable bracket bolt 10 — 89 Shock absorber lower bolt 275 203 — Shock absorber rod nut 65 48 — Shock absorber upper mount nut 30 22 — Stabilizer bar bracket nut 48 35 — Stabilizer bar link nut and grommet 30 22 — Toe link cam adjuster nut 275 203 — Toe link outboard bolt 325 240 — Trailing arm bolt 300 222 — Upper arm outboard bolt 225 166 — Upper arm inboard nut 250 185 — Wheel speed sensor bolt 8 — 71 Wheel knuckle bolt 275 203 —

Mar 30, 2009 | 2007 Ford Sport Trac Limited

Not finding what you are looking for?
2005 Ford Explorer Logo

631 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...