Question about Peugeot 207
Peugeot 207 1.6 2008 model..,manual petrol
Is that on the double overhead cam? You don't mention the second cam.
Posted on May 27, 2018
No valve timing marks on that one - it won't allow you to change that settings.
Posted on Aug 23, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
leave ign off with key out 3mins disconnet battery 5 mins reconnett and press lock/ unlock repeatedly until locks cycle through to re sync try this any probs come back to me
Posted on Feb 23, 2009
cant honestly say i have fitted one on this model,but is it full auto or is their an adjuster on the back of the clutch pedal.??? look first.Ford escort one is a bit of a pig but easy when you have the knack same as a golf easy when you know how .Now golf cable comes with two plastic ties that hold auto adjuster together and you dont relaese them till the cable is fitted.Can you describe the set up then i might be able to help some more.American web site so a lot of models not listed here and the lingo take a bit as well ,i mean whos ever heard of pigs tails or fire wires.Well what else can you expect when they are not taught the queens english and dont drink tea, just waste it by throwing it in the sea.
Posted on Mar 05, 2009
Yes i think that i can help you.Please just send me yuor car chassis number and mor details about the symptom
Posted on Jun 06, 2009
MOST MANUAL TRANSMISSION BEFORE CHANGING FLUID YOU DRIVE CAR AROUND.TO WARM THE OIL.SO IT WILL DRAIN OUT EASILY.NOW SAFELY RAISE VECHICLE AND SUPPORT IT ON JACK STANDS.LOCATE DRAIN PLUG ON DIFFERENTIAL PORTION OF THE CASE.GET SOME RAGS ON HAND.AND A DRAIN PAN.PLACE THE DRAIN PAN UNDER TRANSMISSION. REMOVE THE DRAIN PLUG.LET THE OIL DRAIN.WHEN FINISH.PUT IN NEW GEARBOX OIL.
Posted on Sep 06, 2009
Testimonial: "prompt, concise and clear explanation. I was pleasently surprised"
SOURCE: timing marks on peugeot 1.9 tdi
there is a few ways of doing thes the easiest way being using locking pins
you bont have to go and buy a set of locking pins you can use 3 m8 (13mm headded) bolts and a 5mm allen key
there is a hole in the cam pully and 2 holes in the injection pump pully and 1 in the fly wheel
i suggest you lock the fly wheel up first
the hole is located under the starter motor on the front of the block
insert the 5mm allen key and get someone to turn the crank pully clockwise until allen key engages into the fly wheel
the hole in the cam should be at about 25 past
(if it is at 10 to then you neet to remove the pin from the fly wheel and turn the crank 1 full turn)
when the hole is inthe right place you can insert a m8 bolt and wind it in to the head
with this now lined up you should be able to fit the other 2 m8 bolts into the injector pump pully
with this now done your 1.9 tdi engine is timed up
Posted on Dec 07, 2009
Tips for a great answer:
Apr 20, 2018 | Peugeot Cars & Trucks
Mar 21, 2018 | Peugeot 207 Cars & Trucks
Nov 10, 2017 | Peugeot Cars & Trucks
Aug 21, 2016 | Peugeot Cars & Trucks
Apr 23, 2016 | Peugeot Cars & Trucks
Jun 29, 2014 | 1995 Nissan Pathfinder
Jan 22, 2013 | Peugeot Cars & Trucks
Jul 29, 2008 | 1983 Peugeot 504
502 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: