Question about 1993 Chevrolet S-10
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Firing order is 1-6-5-4-3-2 cyls. # 1-3-5 on drivers side front to back and cyls. # 2-4-6 passenger side front to back.
Posted on Nov 30, 2008
Well what I would start with try setting the valet switch...Every alarm has one the trick is finding it... I would look by the fuse box for a little toggle switch, this is where it most likely will be ... you can activate the valet by flipping the switch and turnining the key.... If you have an L.E.D. that blinks when alarm is armed this light should stay solid...Activating this switch will override the alarm so removal will not be necessary... Good Luck
Posted on Dec 31, 2008
SOURCE: Transmission slow to start
the trasmission fluid leval may be low or your cluches are slipping. check the trasmission fluid leval with the engan wormed up and the trasmition in park pull the dip stike with yellow on it and check the level alsow smell the dip stick if it smells burnt the the tran fluid need to be changed.
if it is low put tranmition fluid in it by using a long funal and put the fluid in the tranmition dip stike tube. If the leval is full and the fulid is not burnt it might be trasnmiton cluches and the tranmition needs to be rebilt.
Posted on Feb 24, 2009
The sounding alarm maybe a security system installed by in the truck. Disconnecting the battery will only temporarily solve your problem, but will resume once you reconnect the battery for electrical power.
You must find the keychain/remote of the security system and disable it. If you are unable to locate this, you can have it disconnected by a qualified automotive electrician.
Word of caution though, if you are using the keyless entry system with the security system, this will be disabled until you install a receiver with such function.
Hope this helps.
Posted on Jun 30, 2009
Even though this appears to be factory installed it is actually an addon module. It should be located near the fuse panel under the drivers side Dash board. You can remove the whole module and reconnect the two wiring harnesses at that point using the original already installed connectors. It was a simple design. It is installed where the harness from the engine compartment connects to the under dash harness.
Posted on Jul 29, 2010
Tips for a great answer:
Oct 10, 2016 | Volvo 850 Cars & Trucks
Jan 14, 2014 | 1993 Ford Escort 4 Door
Jun 23, 2011 | 1993 Toyota Celica
Mar 04, 2011 | Jeep Grand Cherokee Cars & Trucks
May 18, 2010 | 1993 Chevrolet S-10
May 06, 2009 | 1993 Nissan Maxima
Mar 25, 2009 | 1997 Volkswagen Jetta
Mar 22, 2009 | 1993 Honda Accord
68 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: