Question about 1996 GMC Sonoma

1 Answer

How do you take out the bench seat?

How do you remove the truck seat out?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 17,130 Answers

Normally these are bolted down to the body and you can remove them from the rail and release the seat. You will need a set of socket spanners.

Posted on Feb 02, 2016

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove back seat on 1999 i30 plus backrest part


You need to remove the rear seat cushion to get to the holding bolts of the rear seat rest.
To remove the seat cushion, check under the front portion of the seat for any holding clips that if pulled or pressed will release the seat.
After removing the cushion, you would see a bolt on either side of the seat rest. Remove them and lift the seat upwards to dislodge it from the locking tabs behind it.

Jan 22, 2018 | Seat Cars & Trucks

1 Answer

How do i remove rear seat back on ford f250 extra cab


How to remove 2012 Ford F250 Supercab rear seat - YouTube

? 1:50
https://www.youtube.com/watch?v=HsnSR16rc00
Aug 14, 2014 - Uploaded by bruster451
Removal of the rear seat on a 2012 Ford F250 Supercab.

F250/F350 Crew Cab Back Seat (Fold-Down Type) Removal - YouTube

? 3:27
https://www.youtube.com/watch?v=lsDQyOaTu3Y
Feb 15, 2017 - Uploaded by Brent & Gina's RV Traveling Adventures
As part of the body mount bushing removal, I had to remove the back seat. Now, my truck is an 2008 F250 ...

How do i remove rear seat back on ford f250 extra cab - Fixya

www.fixya.com/cars/t26827063-remove_rear_seat_back_ford_f250_extra 3 hours ago - Hi, a 6ya expert can help you resolve that issue over the phone in a minute or two. Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US. the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, ...

Remove F250 Super Cab Back Seat? - Ford Truck Enthusiasts Forums

https://www.ford-trucks.com > ... > 1999 to 2016 Super Duty Apr 26, 2007 - Anyone remove the back seat yet? Need the ... I use the platform for carring wood projects, extra power tools, and the dog and cat while traveling. It's a lot ... I just ordered the vinyl floor for my 99 and will be ripping the rear seat and carpet out and putting down a dynamat type deadner on the floor. It will be ... Rear Seat removal 1999 F250 Super Cab
11 Sep 2012
want to remove the back seat back section
25 Oct 2010
Removing back seat in 2010 extended cab
5 May 2010
Rear seat back removal
2 Aug 2009
More results from www.ford-trucks.com

How can I remove the rear seat back on a 2012 Ford F-250 Super Duty?

https://www.justanswer.com > Car Questions > Ford Repair Satisfied Customers: 3,365. Experience: 28 yrs. experience as Ford ASE Master Technician. Accolades include being a 2005 Ford PTS Regional Finalist and 2006 ASE Ford National Technician. Verified. Hello my name is Steve W, here are the instructions on seat back removal, click here. Ask Your Own Ford Question.
remove rear seat back on ford f250 extra cab Google Search

Dec 12, 2017 | Ford F-250 Cars & Trucks

1 Answer

I need to know what bolts to remove in order to remove the seats from a cadillac escalade ext


Hello: First remove the plastic covers at the front and rear of the seat tracks (do it carefully so you don't break them) then remove the bolts in the rear (move the seat all the way forward) one on each side. It will either be a 15mm bolt head or a torx head bolt depending on what year truck (don't remember what size torx) after removing rear bolts, move seat all the way forward disconnect ALL electrical connectors, tilt seat forward to disconnect hooks in seat rail and you should beable to remove seat. On some tear models you may have to disconnect the seat belt.

Feb 08, 2011 | Cadillac Escalade EXT Cars & Trucks

1 Answer

How to remove bottom of back seat need to remove seat to remove rear shocks..


PUSH IN CENTER FRONT EDGE CUSHION TO DISENGAGE PART OF SEATS WIRE FRAME FROM CLIPS.WITH CLIPS UNHOOKED LIFT UP AND REMOVE SEAT.IF REAR SEAT NOT HELD IN PLACE WITH CLIPS. LIFT UP THE REAR SEAT CUSHION AND PIVOT IT FORWARD. DETACH THE RETAINING BOLTS AT THE LOWER EDGE OF THE SEAT BACK AND IF NECESSARY REMOVE THE SEAT BELT ANCHOR BOLTS.LIFT UP ON SEAT BACK REMOVE IT..

Feb 06, 2011 | Jaguar X-Type Cars & Trucks

1 Answer

Truck lock is jammed by briefcase strap. can i get into the trunk from the back seat? such as does the back seat fold down?


I searched the owner's manual and there was no mention of folding the rear seats down. If you don't have a manual, you can get one here: http://www.extendedgmwarranty.com/owners-manual/buick/1999-Buick-Century.pdf

You can remove the seats following the instructions below from autozone.com.
Rear Seats
SEAT CUSHION


jturcotte_98.gif

Fig. Typical W-Body rear seat cushion removal

  1. Locate and remove the small bolts at the front lower edge of the seat cushion.
  2. Pull the tabs on the rear cushion retainers.
  3. Remove the seat cushion by lifting up and pulling out of the retainer.
  4. Installation is the reverse of the removal procedure. Make sure the retainer tabs are snapped into place. Tighten the bolts to 18 ft. lbs. (25 Nm).

SEAT BACK


jturcotte_99.gif

Fig. Typical W-Body rear seat back removal

  1. Remove the seat cushion as described above.
  2. Remove the anchor nuts securing the rear seat retainer at the bottom of the seat back.
  3. Grasp the bottom of the seat back and swing upward to disengage the offsets on the upper frame bar from the hangers.
  4. Lift the seat back upwards to remove from the vehicle.
  5. Installation is the reverse of the removal process. Make sure the hooks on the seat back are properly installed to the hangers. Tighten the anchor nuts to 89 inch lbs. (10 Nm).

Nov 07, 2010 | 1999 Buick Century

1 Answer

Remove front seat


SECTION 501-10: Seating 1998 Escort/Tracer Workshop Manual REMOVAL AND INSTALLATION Seat —Front Removal
NOTE: Driver side seat shown, passenger side seat similar.
  1. Slide the seat to its rearward position.
  1. Remove the front seat track to floor front bolts.
  1. Slide the seat to the forward position.
  1. Remove the front seat track to floor rear bolts.
  1. Disconnect the safety belt warning indicator switch electrical connector.
  1. Remove the front seat.

Dec 06, 2009 | 1998 Ford Escort

1 Answer

Describe how to remove the seats from a 2002 dodge stratus


simple, remove the headrest,move the seat forward fully remove the bolts 15 or 18 mm heads that hold the rear of the seat track move the seat rearward remove the final 2 bolts holding the seat set the seat as far forward as possible and remove the seat after unplugging any electrical connectors of corse

Aug 06, 2009 | 2002 Dodge Stratus

1 Answer

Mustang rear seat removal?


please rate highly if this is what you need

Section 01-10: Seats and Tracks 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Seat Cushion, Rear Removal and Installation
  1. Release pin from locks by pressing release button under rear seat cushion.
  1. Pull rear safety belt and buckle (60044) through openings in rear seat cushion pad and frame (600A88) and remove rear seat cushion pad and frame .
  1. To install, reverse Removal procedure.
----------------------------------------------
Section 01-10: Seats and Tracks 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Seat Back, Rear Sedan
Removal
  1. Remove rear seat cushion as outlined.
  1. Remove rear seat bolster. Refer to Section 01-05 .

  1. Remove rear seat bolster mounting bolts. Remove bolster assembly.
  2. Remove four seat back to package tray retaining bolts.
  1. Remove seat back.
  1. To install, reverse Removal procedure.

May 04, 2009 | 2004 Ford Mustang

1 Answer

How to remove the back seat from my 1998 Mercury Villager


it is not designed to be removed. It is designed to slide back and forth as needed.

Section 01-10: Seats and Tracks 1998 Villager Workshop Manual
REMOVAL AND INSTALLATION Seat, Rear Bench
Removal
  1. Remove the center seat(s) if equipped. Refer to the procedure in this section.
  1. Slide the bench seat forward to the center row seating position.
  1. Use a flat-blade screwdriver to remove the cover caps from the front of the rear seat cushion latch cover.




  1. Remove the two rear seat bolts from the front of the rear seat cushion latch cover.




  1. Lift the rear seat cushion floor cover on the back of the rear bench seat and remove the two inboard rear seat bolts and the two outboard rear seat bolts.




  1. Remove the bench seat from the vehicle through the body side door opening.

Apr 30, 2009 | 1998 Mercury Villager

1 Answer

Seat Belt repair/replace


  1. Remove front seat.
  2. Remove adjuster cover. A
  3. Slide floor anchor cover.
  4. Remove floor anchor bolt. B
  5. Remove shoulder anchor bolt. C
  6. Remove front and rear kicking plate, then remove center pillar upper and lower garnish.
  7. Disconnect seat belt pre-tensioner connector.
  8. Remove the screw securing seat belt pre-tensioner retractor, then remove seat belt and seat belt pre-tensioner retractor.
  9. Remove bolts securing seat belt adjuster, then remove seat belt adjuster. Reverse procedure to install.J

Nov 03, 2008 | 2000 Nissan Maxima

Not finding what you are looking for?
1996 GMC Sonoma Logo

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...