Question about 2003 Pontiac Grand Am

1 Answer

I have a 2003 grand am.....sounds like the signal light is inducator lights are flashing inside or outside....and are working when need to be is this a issue for a machanic

This has happened with another grad am I had this car has only 106,000 km to soon for the bone yard

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Pontiac Master
  • 1,444 Answers

Not a mechanic issue. The problem is the flasher relay is constantly active. The reason you don't have the indicator on is the switch isn't turned on.

Posted on Apr 27, 2016


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

On 2003 Kia Sedona, when there is moisture outside like rain or snow the signal lights don't work Properly. When apply brake right signal light comes on and does not blink, when turn on left signa

sounds like you are getting water into the connections and possibly have a bad earth connection. Suggest you check all light connections for water ingression.

Aug 11, 2017 | 2003 Kia Sedona

1 Answer

The turn signal won't flash on my Pontiac Grand Am '02

Check Turn signal flasher. Known high failure rate.

Jan 10, 2013 | 2002 Pontiac Grand Am

1 Answer

I have 2003 Grand Am and had trouble with the winshield washers not working. Then a few weeks later there was a clicking noise and my signal lights kept flashing inside the car. Both stopped shortly after....

When the check engine light comes on,The ABS system becomes disabled and so does Trac,You need the check engine light code,As for the windshield washer if the wiper work the pump is non operational,as for the signal light its cheaper to put a signal flasher on if that doesnt correct it you will need a multi switch.Unless you have a lot of money and let someone diagnosis the problem

Mar 31, 2012 | Pontiac Grand Am Cars & Trucks

1 Answer

Turning light signal

Neither if it lights up the fuse and the bulb are good, what is wrong sounds like a relay switch, it should be located under the dash, it is what makes that click click sound inside the car when you flip the switch. It will look like either a black box or a silver circle

I’m happy to help further over the phone at

Jan 20, 2012 | 2003 Mercury Grand Marquis

1 Answer

Turn signal doesn't work when headlights on

It sound like you have a grounding problem, does the headlight on the left seem dimmer than the right? Check the ground wires and the light sockets for corrosion.

Mar 27, 2010 | 2003 Chevrolet Venture Passanger

2 Answers

All turning signals external lights are not working

Check your Emergency light switch and turn signal switch.

Jun 01, 2009 | 2002 Chrysler Town & Country

2 Answers

Signal light clicking and won't stop.

Its annoying not dangerous. Make sure a bulb is not out. Then try changing the relay it sounds like it could be bad.

Apr 09, 2009 | 2003 Pontiac Grand Am

2 Answers

Lights flashing, seatbelt alarm sounding, outside temp. guage not working...

The body control module is the cause of your weird problems. Replace it.

Mar 20, 2017 | 2003 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Pontiac Grand Am Logo

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides