HOW DO YOU INSTALL A PASSENGER SIDE MIRROR UNIT FOR A HONDA ACCORD LUXURY 2004 MODEL
I HAVE JUST PURCHASED A SIDE MIRROR UNIT FOR MY HONDA 2004 LUXURY MODEL ALTHOUGH IT IS OF A 2006 MODEL i AM TOLD THAT IT WILL FIT ALSO HOW DO YOU OVERCOME THE PLUG PROBLEM THEY ARE NOT THE SAME WILL A 2006 MODEL MIRROR BE COMPATABLE WITH A 2004 MODEL
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
May 8, 2012 - Uploaded by 1A Auto Parts
In this video, 1A Auto shows you how to repair, install, fix, change or replace a broken, smashed, cracked, or ...
Likely to be the actuator/motor inside that has failed. Order one off eBay that offers returns an find out how to fit it. Should be job done! If not its likely to be a more serious electrical issue good luck with that..
I apologize if this is insulting but heated mirrors were an option in this model and unless you specified a heated mirror when obtaining the replacement part then you may have a mirror that eventhough the plugs (connections) fit, it doesnt ahve a heating element to warm the mirror itself. Do you on the glass surface of the mirror have a box with waves coming out of top of it or some resemblance of such. This indicates heat and thus the presence of a heated mirror assembly. Otherwise you will need to check your invoice if you purchased from a parts provider. If you obtained from a used parts location (junk yard) you may have gotten a cosmetic similar model that doesnt have all the functionality of your previous mirror.
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls and the mirror. Then you can access the bolts securing the mirror onto the door....