Question about 1999 Chevrolet Tracker

Open Question

What relay supplies power to headlights on a 1999 Chevrolet Tracker and where it's locater?

My headlamps shot off

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Marc Podeszek

  • 840 Answers

SOURCE: How do you change a headlamp on a 2001 chevy tracker

there is a cover on the backside of these just pull of or twist off then replace the headlamp/ Please rate my response thank you very much

Posted on Feb 01, 2009

Ad
gordanddar

gord storey

  • 477 Answers

SOURCE: 2001 Chevrolet Cavalier, service light came on

I would check the voltage at the battery while the engine is running. If over 15 volts , your voltage regulator is shot , and your headlights cooked.

If that is problem , alternator will have to be replaced.

Posted on May 05, 2009

Anonymous

  • 136 Answers

SOURCE: need to know where spark plugs are located in order to change

Follow the spark plug wires down into the engine, a soft tug should pull the wire loose from the plug and then you will need a spark plug socket to change them.

Posted on May 18, 2009

Anonymous

  • 1 Answer

SOURCE: 1999 Chevy Cavalier Horn Relay Location

The relay is located under the glove compartment. Little difficult to get to but if you peek your head just underneath, you'll see it. Easy to take out and replace. Ive replaced mine and still have a problem. I hear a clicking noise and even can feel the contact when horn is pressed. I changed the horn about 1yr ago and now am wondering if the horn could have gone out so soon.

Posted on Oct 06, 2009

emissionwiz

Marvin

  • 85222 Answers

SOURCE: adjust headlamp on 2001 chevrolet tracker

They are behind the headlight.

Posted on Feb 23, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2004 lincoln town car. Headlight needs repair, bulb out. Ny mechanic states balast is shot. Already replaced bulb. Is there a balast on this car ?


The stock halogen headlamps that came with the car DO NOT use a ballasting system. However, many owners upgrade to aftermarket xenon headlamps for a brighter output which do require a ballast.

Nov 26, 2016 | Lincoln Cars & Trucks

1 Answer

On my Peugeot 306 xltd my dip/dim lights have stopped working how can I fix this


Either the dip/dim switch is faulty or the high beam filaments in the headlamp bulbs are shot. Can you still flash the headlamps? If yes then it shows that the bulbs are OK.

Sep 22, 2015 | Peugeot Cars & Trucks

1 Answer

How to replace a headlight


please rate, thanks.

SECTION 417-01: Exterior Lighting 2000 Focus Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 03/6/2003
Headlamp Assembly Removal
All vehicles
  1. Remove the fender splash shield lower retaining screw.
    • Push the fender splash shield to one side.
    e0014434.jpg
  1. Remove the headlamp assembly lower retaining bolt.
    e0022745.jpg
  1. Remove the radiator grille.
    e0010551.jpg
Vehicles built up to 07/1999
  1. Remove the headlamp assembly.
    • Disconnect the headlamp assembly electrical connector.
    e0022744.jpg
Vehicles built 07/1999 onwards
  1. Remove the headlamp assembly.
    • Disconnect the headlamp assembly electrical connector.
    e0030083.jpg
Installation
Vehicles built up to 07/1999
NOTE: Procedure if there is a concern over the formation of condensation inside the plastic headlamp lens or if the plastic headlamp lens is split.
NOTE: It is normal for a small amount of condensation to form on the inside of the plastic headlamp lens, it will disappear when the headlamp is switched on. If the headlamp does NOT dry out after having been switched on for 15 minutes, check the build date of the headlamp. If the build date is between 01.08.98 and 30.09.98, install a new headlamp cover flap.
NOTE: If there is a concern, both headlamps must be removed. Defective headlamps must be renewed and reworking may be necessary. When the headlamp is installed, the number of mounting points must be reduced.
  1. If the headlamp assembly is defective, install a new one.
  1. NOTE: Sometimes the guide pin on the plastic headlamp lens is still present on a new headlamp assembly.
    Cut off the guide pin flush and de-burr as necessary.
    z9921164.jpg
  1. Remove the headlamp levelling motor from the faulty headlamp assembly and install it on the new headlamp assembly. For additional information, refer to Headlamp Leveling Motor - Vehicles Built Up To: 10/2001 in this section.
  1. NOTE: Sometimes there is no hole in the bracket of a new headlamp assembly.
    Do NOT install the retaining bolt any more.
    e0022746.jpg
All vehicles
  1. NOTE: Fix the headlamp assembly in place using the locating pin.
    Install the headlamp assembly upper retaining bolts.
    • Connect the headlamp assembly electrical connector.
    v9710258.jpg
  1. Install the radiator grille.
    e0010551.jpg
  1. NOTE: Fix the headlamp assembly in place using the locating pin.
    Install the headlamp assembly lower retaining bolt.
    v9610258.jpg
  1. Install the fender splash shield lower retaining screw.
    e0014434.jpg
  1. Adjust the headlamps. For additional information, refer to Headlamp Adjustment - in this section. For additional information, refer to Headlamp Adjustment - Vehicles With: High Intensity Discharge Headlamps in this section.

Dec 16, 2010 | 2000 Ford Focus

1 Answer

Need help changing out the low beam on drivers side of 2006 buick rainier


Removal & Installation
Bulb Replacement
To Remove:

CAUTION
Halogen bulbs contain pressurized gas.
Mishandling a bulb may result in the bulb shattering into flying glass
fragments.

CAUTION
Make sure to wear eye protection when
handling a halogen bulb.

CAUTION
Do not touch the glass of a halogen bulb,
only handle the bulb by the base.

CAUTION
Do not allow a halogen bulb to come into
contact with dirt or moisture.

CAUTION
Make sure to dispose of a used halogen bulb
properly.

CAUTION
Do not allow children to handle halogen
bulbs.


  1. Turn the lamp switch to the off position.
  2. Make sure the bulb is cool before changing.
  3. Remove the headlamp assembly from the headlamp panel.
  4. Remove the rear access cover from the headlamp assembly.
  5. Disconnect the headlamp connector.
  6. Remove the bulb from the headlamp assembly by rotating the bulb and socket
    counterclockwise.

To Install:


  1. Connect the headlamp connector.
  2. Install the bulb into the headlamp assembly by rotating the bulb and socket
    clockwise.
  3. Install the rear access cover onto the headlamp assembly.
  4. Install the headlamp assembly into the headlamp panel.

Headlamp Assembly
Chevrolet
To Remove:






Headlamp Assembly (Chevrolet)
gm-06-00-1591.gif




  1. Remove the grille from the front of the vehicle.
  2. Release the headlamp assembly retaining tabs.
  3. If equipped, disconnect the headlamp leveling motor connector.
  4. Disconnect the headlamp connector.
  5. Remove the park/turn and side marker bulb sockets from the headlamp
    assembly.
  6. Remove the headlamp assembly from the headlamp panel.

To Install:


  1. Place the headlamp assembly into the headlamp panel.
  2. Install the park/turn and side marker bulb sockets into the headlamp
    assembly.
  3. Connect the headlamp connector.
  4. If equipped, connect the headlamp leveling motor connector.
  5. Lock the headlamp assembly retaining tabs.
  6. Install the grille onto the front of the vehicle.

GMC, Oldsmobile, Buick, Isuzu, and Saab
To Remove:






Headlamp Assembly (GMC, Saab, Oldsmobile, and Buick)
gm-06-00-1590.gif




  1. Release the headlamp assembly retaining tabs.
  2. Disconnect the headlamp connector.
  3. Remove the park/turn bulb socket from the headlamp assembly.
  4. For GMC, Saab, Oldsmobile, and Isuzu vehicles, remove the side marker bulb
    socket from the headlamp assembly.
  5. Remove the headlamp assembly from the headlamp panel.

To Install:


  1. Place the headlamp assembly into the headlamp panel.
  2. For GMC, Saab, Oldsmobile, and Isuzu vehicles, install the side marker bulb
    socket into the headlamp assembly.
  3. Install the park/turn bulb socket into the headlamp assembly.
  4. Connect the headlamp connector.
  5. Lock the headlamp assembly retaining tabs.


prev.gif next.gif

Oct 28, 2010 | 2006 Buick Rainier

3 Answers

87 Lincoln headlight changing instructions


You must first remove the Headlamp bezel which is the chrome trim that surrounds the duel headlamp housing. The chrome trim surround is mounted to the Headlamp mount panel with three nuts which you can only access on the inside. Pop open the hood and look on the inside near were the headlamp bulbs are. You will see the three mount nuts for the headlamp bezel. Might be rusty so first give it a shot of WD40 or similar. Remove the nuts and then you can lift the headlamp bezel from the outside away from the headlamp bulbs. The headlamp bezel only has tabs that slid into a slot on the bottom so you can lift out once the top three nuts are removed. Once the headlamp bezel has been removed you can then access the 4 screws that hold the headlamp trim ring2.gif in place which is what holds the headlamp bulb in place. There are several other screws that in the same area but they are only for adjustment of the headlamp bulbs within the housing. Leave them in place. Remove the stainless steel ring that is holding the lamp in place, and then unplug the headlamp from the back and replace the headlamp. Should take you less than 5 or 10 minutes. Dan

Sep 21, 2009 | 1989 Lincoln Town Car

2 Answers

High Beam works, but regular parking and


Sounds like the switch is shot.You can troubleshoot it with a volt meter

Sep 17, 2009 | 2001 Ford Escort ZX2

1 Answer

I need to change the headlight i don't know how


You must first remove the Headlamp bezel which is the chrome trim that surrounds the duel headlamp housing. The chrome trim surround is mounted to the Headlamp mount panel with three nuts which you can only access on the inside. Pop open the hood and look on the inside near were the headlamp bulbs are. You will see the three mount nuts for the headlamp bezel. Might be rusty so first give it a shot of WD40 or similar. Remove the nuts and then you can lift the headlamp bezel from the outside away from the headlamp bulbs. The headlamp bezel only has tabs that slid into a slot on the bottom so you can left out once the top three nuts are removed. Once the headlamp bezel has been removed you can then access the 4 screws that hold the headlamp trim ring in place which is what holds the headlamp bulb in place. Remove this ring and then unplug the headlamp from the back and replace the headlamp. Should take you less than 5 or 10 minutes. Dan

Aug 09, 2009 | 1989 Lincoln Town Car

1 Answer

How do i change both headlights on my 2002 chevy cavillier


Removal & Installation To Remove:
  1. Remove or disconnect the following:
    • Hood close out filler panel.
    • Bolts from the headlamp.
    • Headlamp from the headlamp mounting panel.
    • Electrical connector from the headlamp.
    • Headlamp bulb/socket retainer ring from the headlamp.
c218bc4.gif

  • Headlamp bulb/socket from the headlamp.
  • Bolts from the headlamp adjuster mechanism.
  • Headlamp adjuster mechanism.
  • To Install:
    1. Install or connect the following:
      • Headlamp bulb/socket to the headlamp.
      • Headlamp bulb/socket retainer ring to the headlamp.
      • Headlamp adjuster mechanism to the headlamp housing, if necessary
      • Bolts to the headlamp adjuster mechanism. Tighten to 6 N.m (53 lb in).
      • Electrical connector to the headlamp.
      • Headlamp to the headlamp mounting panel and lower mounting bracket.
      • Bolts to the headlamp. Tighten to 10 N.m (89 lb in ).
      • Hood close out filler panel.

    Jun 06, 2009 | 2002 Chevrolet Cavalier Coupe

    1 Answer

    2001 Chevrolet Cavalier, service light came on brights indicator came on, and headlamps flickered out. Changed relay, checked headlamp switch. Where to now?


    I would check the voltage at the battery while the engine is running. If over 15 volts , your voltage regulator is shot , and your headlights cooked.

    If that is problem , alternator will have to be replaced.

    May 05, 2009 | 2001 Chevrolet Cavalier

    Not finding what you are looking for?
    1999 Chevrolet Tracker Logo

    Related Topics:

    45 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    Marvin
    Marvin

    Level 3 Expert

    85222 Answers

    Jonah Oneal

    Level 3 Expert

    14092 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22485 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...