Question about 1998 Dodge Grand Caravan

Open Question

1998 grand caravan. I need to get the bench seat side for the quick release Mechanism

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

HalfmoonUSA

  • 145 Answers

SOURCE: I need a 1998 Dodge Grand Caravan serpentine belt diagram.

The belt routing diagram is shown on a decal located on thehorizontal metal support above the radiator and under the hood support rod (passenger's side near the coolant overflow tank).
PT Stanley

Posted on Jan 23, 2009

Ad

Anonymous

  • 1392 Answers

SOURCE: Airbag light comes on intermittently for 2002 Grand Caravan

Makes sense if that is what code was stored in the Occupant Restraint Module. There are sensors in the seatbelts now.

Posted on Mar 10, 2009

Anonymous

  • 1 Answer

SOURCE: Is it possible to put a 3 seater bench in second row

Yes...you can. I did this in my 05 Grand Caravan. We found ours at a local junk yard. It cost us 200 and even matched pretty well with the current benches. Just call around to your area junk/salvage people.

Posted on Apr 07, 2009

Anonymous

  • 5 Answers

SOURCE: Rear passenger window stopped opening

check the fuses in the fuse box in the engine bay 

Posted on May 22, 2009

Anonymous

  • 359 Answers

SOURCE: The hood release lever does not release the hood.

Do you have a new cable?? If not most likely there is a need for it it may be stretched out. You can grab the end of the cable that goes to the release (in the interior) with a pliers and pull it this will finish the cable and a new one will most likely be needed

Posted on Jul 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello. I was wondering if you can put a bench seat in my 2008 Chrysler town and country in place of the stow away bucket seats. I really need the extra seat.


We do not sell and install seats.

Seats for Chrysler ' eBay

www.ebay.com/sch/Seats-for-Chrysler/33701/bn_1358665/i.html
eBayGo to My Vehicles .... 2008-2010 Dodge Grand Caravan-Chrysler Town & Country; Driver Seat Side .... 1959 Chrysler New Yorker Bench Seat Rear Ash Tray.

Oct 07, 2015 | Chrysler Cars & Trucks

1 Answer

2nd row stow and go seat won't release to fold down into floor on my 2012 dodge grand caravan


You can make it release by pulling up on the metal bracket where the cable attaches under the seat at the back in the middle.

Jun 14, 2012 | Cars & Trucks

1 Answer

Im trying to get the headrests out to install a seat cover on an F-150 with bench seats


On my F150 (2002 model), there is only one release button. My daughter had removed the headrest, and put it on backwards. It was locked in place, so I couldn't get it off until I noticed a little pinhole on the opposite side of the side with the release button. I inserted a paperclip into the pinhole, and it released the locking mechanism on that side so that the headrest could pop right off.

Nov 21, 2010 | 2005 Ford F-150

1 Answer

Cant get the rear bench in


The front bottom connections goes in first. You have to lift the back of the bench up and slide the u-shaped connections under the rods. Once there in, then lower the back of the bench. The back has latches that should spring open and around the rods in the floor opening. You should be able to actually drop the back of the bench and they should "seat", however it is better to place the back of the bench on top of the rods, and using the lever located on the bottom of the bench - open the latches; causing the latches to grab the rod.
Let me know if this helped, or if you have any additional information, problems, or questions. Feel free to contact me at FixYa.com!

Jan 25, 2010 | 2005 Dodge Grand Caravan

1 Answer

Can i put captains chairs in 2nd row of 1998 grand caravan that came with bench seat


You most certainly can!!!!

I did away with my 2nd row bench a long time ago.

The wreaking yard is the best place to find replacements, I even got a pair that matched. :)

Dec 08, 2009 | 2000 Chrysler Grand Voyager

1 Answer

How do i remove the front seats of a 1998 Pontiac Grand Prix?


On W-Body vehicles, the front seats are secured to the floorpan by two front hook attachments and two rear bolts installed to nuts welded to the floorpan.
The manually operated two-way front adjusters provides only fore and aft movement of the seat. When the seat adjuster handle located on the front seat is pulled up, the seat adjusters unlock, permitting travel of the seat. When the seat is in the desired position and the seat adjuster handle is released, the seat locks in place.
A power operated six-way seat adjuster is available. The adjusters are activated by three 12 volt, reversible, permanent magnet motors with a built-in circuit breaker. The motors are energized by a switch bolted on the seat side panel.
The three motors drive the front seat and rear vertical actuators and a horizontal actuator. When the adjusters reach the limit of travel, torque is absorbed through the rubber mounted grommets located between the motor and the support. An overload relay is provided in the circuit and will open should excessive stall be applied.
The optional 60/40 split bench front seats have seat back head restraints on the driver's and passenger's seat back. The head restraints are designed so they cannot be removed from the seat back without first inserting a small rounded tool inside the head restraint support tube to release the locking tab. The 60/40 split bench seat is equipped with a reclining mechanism on both the driver's and passenger's side. The recliner lever is located on the outboard side of the spring cushion. When the lever is pulled upward, the spring loaded dual linear reclining unit located in the cushion frame is released, allowing the seat back to be pushed rearward or allowing the spring loaded reclining unit to bring the seat back forward.
Bucket seats are equipped with manual reclining mechanisms. An optional six-way power seat adjuster is available. Some bucket seats are equipped with inertia seat back locks. This system allows the seat back to fold forward without requiring the occupant to release a locking lever or access to the rear seat area. During a sudden stop or deceleration, or if the front of the vehicle is nose down, the inertia system of the seat back lock will engage, holding the seat back in its rest position. A release lever is provided to allow manual release of the seat back lock when the vehicle is in the nose down position. The release lever is located at the lower rear outboard corner of the seat back.
Some W-Body vehicles (notably Pontiac coupes) have passenger front seats equipped with an E-Z Entry device. This is actuated, in an unoccupied seat, by completely folding the seat back forward disengaging the adjuster, and sliding the front seat forward to gain access to the rear seat area. To return the seat to its normal position, return the seat back to its rest position, and slide the entire seat rearward, engaging the adjuster.
W-Body rear seats are available in several styles including a rear seat with an integral child restraint device.

Sep 01, 2009 | 1998 Pontiac Grand Prix

2 Answers

Need a back bench seat for my 1994 Caravan


I have a third row seat available from a 1995 Caravan. Contact, bbagasol@netzero.net.

Jun 12, 2009 | 1994 Dodge Caravan

1 Answer

Is it possible to put a 3 seater bench in second row


Yes...you can. I did this in my 05 Grand Caravan. We found ours at a local junk yard. It cost us 200 and even matched pretty well with the current benches. Just call around to your area junk/salvage people.

Mar 29, 2009 | 2005 Dodge Caravan

3 Answers

Tailgate latch will not release


on my 2000 dodge grand caravan you can manually release the tailgate by manually lifting the connecting rod between the latch and the tailgate handle. you can access this rod by removing a small cover over an access hole near the latch at the bottom of the tailgate.

Jul 27, 2008 | 1998 Dodge Grand Caravan

Not finding what you are looking for?
1998 Dodge Grand Caravan Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...