Question about 2007 GMC Yukon

1 Answer

I changed out ignition and my car won't start and the transmission light is on. My car is a 2007yukon .

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 557 Answers

The immobiliser chip in the new key has to be matched to the ECU it cannot start without it.

Posted on Nov 23, 2016

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 voyager lx, won’t turn over, starts when it feels like it, changed starter, starter relay, and ignition switch nothing helps.


Automatic has a shifter switch to assure you're in park or neutral. Clutch on stick shift has a switch too.

Feb 19, 2018 | Plymouth Voyager Cars & Trucks

1 Answer

I have a 1999 Honda accord LX coup I changed the fuel pump and now my car still won't start ? Also I changed the fuse same thing won't start can some on help me please ??????


Ignition switch was my problem after changing fuel pump and main relay. Then had to have transmission rebuilt, all of this was back to back.

Aug 10, 2013 | Cars & Trucks

1 Answer

F250 1998 light duty won't shift out of park


For car not changing gears and not shifting out of park mode ,it can be shifter assembly issue, or it can also be transmission issue. Get the shifter assembly inspected with ignition OFF.

For more troubleshooting, I suggest you to get the Following help link checked, its complete step by step procedure to inspect gear shift issues: -----

GEAR SHIFT ISSUES

http://alltypesofpartsreplacing.blogspot.com/2012/11/gear-shift-issues.html

==========


NO REVERSE ON TRANSMISSION
http://alltypesofpartsreplacing.blogspot.com/2012/12/no-reverse-on-transmission.html
-------------

Transmission fluid leak, transmission gears slip,
http://alltypesofpartsreplacing.blogspot.com/2012/12/transmission-fluid-leak-transmission.html
----------


These will help.

Thanks.

Dec 06, 2012 | 1998 Ford F250 SuperCab

1 Answer

Rumbling noise coming from engine compartment.


engine size, etc., I can only make educated guesses, but here goes: You stated "My car will drive, but very slow hardly moving". My first suspicion is that you don't have a transmission problem, but the car is in what Chrysler calls the 'limp-home mode'. This occurs when the computer 'sees' a problem with an engine function or sensor that is serious, but not so bad that the car won't run at all. Limp-home mode allows your car to only operate in second gear so that you won't damage it further by driving normally, but won't leave you stranded either. Is your 'check engine' or 'service engine' light on? If not, check to see that it actually works by turning the key 'on', but not starting the car. All the dash lights should be lit for about 3-5 seconds. No matter what, you need to check your transmission fluid level (on a Crysler, should be checked with the engine running and in gear, NOT park or nuetral). Safety first, make sure someone is holding the brake on - please don't ever trust a 'parking brake' for this. If the fluid level is OK and there's no 'check engine' light you need
to visit a competent transmission shop. Probabably a worn front pump, torque converter, or a hung spool valve in the valve body, none of which is generally fixable at home. If you do have a 'check engine' light on, see a regular mechanic first as there is a mechanical problem probably not related to the transmission. Good Luck!

Oct 13, 2012 | 2003 Chrysler Sebring

1 Answer

My Nissan maxima won't start on the first try


Could be several things that caused car won't start, inculding starter, ignition, dirty or loose battery connections.
Honda Diagnostic Tool

Jul 09, 2012 | 1998 Nissan Maxima

1 Answer

1988 jeep won't start


Not sure if I read your post right, but you have to have a hot wire to the ignition switch from the battery, independent of anything else on the car, before the switch will work.
The CPS is a common problem on the jeeps, though. If bad, you may not get a coil signal.

Jun 10, 2012 | 1988 Jeep Cherokee

1 Answer

2002 saturn sl won't start, turn over but won't start


Done cars have a kill switch if they are low on oil. Check your oil. If the oil is good, it may be the ignition switch.

Jan 01, 2018 | 2002 Saturn Sl

1 Answer

I have a 2001 Olds Intrigue that won't start every once in a while. When it won't start the security light flashes so GM told me it was the passcode and I would have to change the ignition switch...


you can not bypass the security in that car, it is built into the main computer, they have problems with the ignition switch screwing up and the only way to start it while the light flashes is to turn the key to ON but don't crank engine, leave on for 10 to 15 minutes until light goes out then start car.

Sep 21, 2011 | 1998 Oldsmobile Intrigue

1 Answer

Won't start battery and starter are good


BATTERY SHOULD HAVE 12.6 VOLTS. IF BATTERY GOOD USE TEST LIGHT SEE IF POWER GOING TO STARTER. IF NO YOU HAVE BLOWN STARTER FUSE BAD RELAY FAULTY IGNITION SWITCH OR BAD BATTERY CABLES.IF POWER GOING TO STARTER THE STARTER SOLENOID FAULTY.COULD HAVE BAD CLUTCH START SWITCH ON MANUAL TRANSMISSION MODELS.

Sep 06, 2011 | 1998 Toyota Sienna

Not finding what you are looking for?
2007 GMC Yukon Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...