Question about Ford Cars & Trucks

1 Answer

Were is engine light fuse 05 ford focus - Ford Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 15,575 Answers

There isn't a fuse just for the check engine light fuse . There are fuse's that power the whole insturment cluster . Check engine light not working ?

  • The malfunction indicator lamp (MIL) is never/always on
  • Circuitry.
  • Powertrain control module (PCM).
  • Instrument cluster.
  • Go To Pinpoint Test O .

PINPOINT TEST O: THE MALFUNCTION INDICATOR LAMP (MIL) IS NEVER/ALWAYS ON Test Step Result / Action to Take O1 RETRIEVE AND RECORD THE DTCS FROM BOTH CONTINUOUS AND ON-DEMAND PCM SELF-TESTS
  • Key in OFF position.
  • Connect the diagnostic tool.
  • Key in ON position.
  • Enter the following diagnostic mode on the diagnostic tool: PCM Self-Test.
  • Check for PCM DTCs from the continuous and on-demand self-tests.
  • Are any PCM DTCs recorded?
Yes
REFER to the Powertrain Control/Emissions Diagnosis (PC/ED) manual.

No
GO to O2 . O2 CARRY OUT THE INSTRUMENT CLUSTER INDICATOR LAMP CONTROL ACTIVE COMMAND USING THE DIAGNOSTIC TOOL
  • Key in OFF position.
  • Connect the diagnostic tool.
  • Key in ON position.
  • Enter the following diagnostic mode on the diagnostic tool: Instrument Cluster Active Command.
  • Select the instrument cluster warning lamps and chime active command. Trigger the indicator lamps active command on then off, while observing the MIL.
  • Does the MIL illuminate when commanded on and turn off when commanded off?
Yes
GO to O3 .

No
GO to O4 . O3 CHECK FOR CORRECT PCM OPERATION
  • Disconnect all the PCM connectors.
  • Check for:
    • corrosion
    • pushed-out pins
  • Connect all the PCM connectors and make sure they seat correctly.
  • Operate the system and determine if the concern is still present.
  • Is the concern still present?
Yes
INSTALL a new PCM. REFER to Section 303-14 . TEST the system for normal operation.

No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CLEAR the DTCs. TEST the system for normal operation.
O4 CHECK FOR CORRECT INSTRUMENT CLUSTER OPERATION
  • Disconnect the instrument cluster connector.
  • Check for:
    • corrosion
    • pushed-out pins
  • Connect the instrument cluster connector and make sure it seats correctly.
  • Operate the system and determine if the concern is still present.
  • Is the concern still present?
Yes
INSTALL a new instrument cluster. REFER to Instrument Cluster in this section. TEST the system for normal operation.

No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CLEAR the DTCs. TEST the system for normal operation.

Posted on Jun 11, 2017

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

05 ford focus started stuttering and engine light flashing on


If you can make it to an Autozone, Advance, or Oreilys autoparts store they will scan your car for free.

The clerk can give you the resulting Code number of the defect and you can either price the repair or buy the part and install it yourself.

Feb 23, 2013 | 2005 Ford Focus

1 Answer

Do you have a diagram for a ford focus 2001-05 fuse box - looking for the cigarette lighter


Fuse F46. under the dash. 20 amps. the cover usually has a map to show what the fuse number is. there are 3 rows of fuses the center row is fuses 41 through 51, so 46 is the 6th one down, middle row.

Aug 03, 2011 | 2000 Ford Focus

1 Answer

Fan will not come in on my 2005 ford focus and i have fitted a new sensor to the back of the engine


YEAR 98/05 Check fuse 6 in under bonnet box. 30 amp
YEAR 05/07 Check fuse 1 in under bonnet box 50/60 amp
Both fuses control engine coolant blower motor

Aug 08, 2010 | 2005 Ford Focus

1 Answer

Ford focus 1.6 tdci 05 plate-intermitting oil light


I believe your oil pump is not working, Please do not start the car anymore or your engine will suffer severe engine damage, have it towed to your mechanic.

May 28, 2010 | 2005 Ford Focus

1 Answer

Abs light on dash on 05 1.6 tdci focus. fuses checked wire at sensors checked. any ideas to get light off


one solution could be to disconnect the battery for about 10 min .. sometimes this will reset CPU in the vehicle and cancell the sensor information light... if not have it investegated further.

Feb 16, 2010 | 2005 Ford Focus

3 Answers

05 ford focus fuse box


anyone know where i can get a diagram for the fuse box under the dashboard on the passenger side and where i can download a owner manual for the 05 ford focus ghia many thanks

Sep 29, 2008 | 2005 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...