Question about Ford Cars & Trucks

1 Answer

Where is the clutch safety switch located on a 1989 ford bronco, full size 4wd

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 73 Answers

I think that series uses a clutch position sensor, If so it should be up under the clutch pedal itself. Or it may be on the side of the clutch pedal away from the firewall.

Posted on Aug 18, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 379 Answers

SOURCE: fuel pump switch

also known as the inertia switch is located on the left kick panel area by the emergency brake pedal . 90 full size bronko .

J5

Posted on Jan 16, 2009

Anonymous

  • 3 Answers

SOURCE: firing order for 1989 full size ford bronco 302

13726548 #1 cyl is front pass side and count to back 1234 are on pass side.5678 are on driver side.# 5 being front

Posted on Apr 22, 2009

Anonymous

  • 6 Answers

SOURCE: 1989 Bronco starts but dies after a couple of seconds

try checking the thermostat control senser. it caused my bronco to start for a second and then die. after a while it would finally start and run for a while then die driving down the road. i changed the thermostat control senser and it fixed all problems of dieing

Posted on May 10, 2009

Anonymous

  • 218 Answers

SOURCE: No power to fuel pump

Hi..my name is Keith..and the 2 things that i know of...that will not let power go to the fuel pump is 1..the fuel pump relay being bad..or 2..that something has tripped the Inertia Switch...and it needs resetting..i hope this will help

Posted on Jun 30, 2009

canbruce75

Bruce Canfield

  • 1776 Answers

SOURCE: removing neutral safety switch

Check out the autozone website at autozone.com and register your vehicle. It is free and will give you access to an online repair manual for the vehicle. The steps for removing the neutral safety switch can be found there. Hope this helped. Best wishes.

Posted on Aug 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a turn signal switch on a 1989 Full Size Bronco, not a tilt wheel.


You will need to remove the steering wheel...using a steering wheel puller, or a harmonic balancer puller...the turn signal switch is under the steering wheel...unscrew hold downs, trace wire from turn signal switch to under the dash behind the brake pedal, disconnect the connector wire...re-install pulling wire up from floor to inside the steering wheel...sometimes tying the wire to another object, then pull through...hope this helps.

Oct 11, 2013 | 1989 Ford Bronco

1 Answer

1989 ford bronco full size 5.0 New fuel pumps and pressure regulatorand relay. Still not getting fuel pressure. What else?


have you change fuel filter ? check lines to make sure they arenot blocked..is pump working ,can hear it run ? do have enough fuel in it

Dec 21, 2010 | 1989 Ford Bronco

2 Answers

1989 ford bronco full size need to know where or if it has a fuel cut off switch


the right front kick panel covers up the fuel cut off swith. take the kick panel off and a small box with a buttom will appear
press the button in to reset the fuel supply

Mar 24, 2010 | 1989 Ford Bronco

1 Answer

My 1989 ford bronco will not start by the key you can jumper the selanoid an it will start


The ignition switch is bad,if the neutral safety switch is o k.

Jan 31, 2010 | 1989 Ford Bronco

1 Answer

Removing neutral safety switch


Check out the autozone website at autozone.com and register your vehicle. It is free and will give you access to an online repair manual for the vehicle. The steps for removing the neutral safety switch can be found there. Hope this helped. Best wishes.

Aug 03, 2009 | 1992 Ford Bronco

1 Answer

Neutral safety switch


The neutral safety/back-up light switch is located at the transmission. I am attaching a photo for reference. Hope this helps and best wishes.

08face1.jpg

Aug 03, 2009 | 1992 Ford Bronco

1 Answer

No power to electric fuel pump 88 5L 302


check the fuel pump relay this sends the power to the fuel pump,

also has the car been in a smash even a small one if so the car may be fit with a enersher switch that cuts off the fuel circuit.

recommend you by a repair manual from your local parts retailer for the exact locations of these 2 units

Jul 18, 2009 | 1989 Ford Bronco II

4 Answers

No power to fuel pump


Hi..my name is Keith..and the 2 things that i know of...that will not let power go to the fuel pump is 1..the fuel pump relay being bad..or 2..that something has tripped the Inertia Switch...and it needs resetting..i hope this will help

Jun 30, 2009 | 1994 Ford Ranger Supercab

2 Answers

Firing order for 1989 full size ford bronco 302


13726548 #1 cyl is front pass side and count to back 1234 are on pass side.5678 are on driver side.# 5 being front

Apr 22, 2009 | 1989 Ford Bronco

1 Answer

Fuel pump switch


also known as the inertia switch is located on the left kick panel area by the emergency brake pedal . 90 full size bronko .

J5

Jan 16, 2009 | 1990 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...