Question about 2000 Oldsmobile Intrigue

Open Question

Where is the air door actuator on the passenger side on a 2000 Olds Interige

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1010 Answers

SOURCE: Power Locks

i didn't figured out what the problem is... you say that the doors was remove and you installed new... so what the problem is? i can't search for an answer for you because there is no question or specific problem.

Posted on Jun 23, 2008

Ad

Joe Hogan

  • 10865 Answers

SOURCE: Window will not roll up

Their is a separate motor for each window. The least expensive fix is to replace the entire track assembly and motor. This is not a big job if you have done it before but it could be if you are not mechanical.

Posted on Apr 16, 2009

Anonymous

  • 54 Answers

SOURCE: air conditioning not working on driver side

sounds like one of the mixing doors on the drivers side is stuck on the heater side. or the vacuum hose on the mixing door is off of not creating enough vacuum because of a crack in it or possibly coming off

Posted on May 27, 2009

michael_grey

Michael Grey

  • 365 Answers

SOURCE: cold air on passenger side warm air on drivers side

Actuator motors either get a tear in the rubber or a hose is broken and not letting vacuum assist in its opening.
You can try moving the lever by hand and see if the air gets colder on the bad side.c976077.jpg

Posted on Aug 04, 2009

Anonymous

  • 1 Answer

SOURCE: a/c blowing hot on one side and cold on other

Bad servo ,you have to go under dash to replade.

Posted on Aug 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is drivers, mode door and blend door actuators located


Blend air door actuator (temp)on left side of heater box near the gas pedal below it may be the mode door & passenger side has a temp door actuator for that side.

Nov 21, 2015 | 2000 Dodge Caravan

2 Answers

2000 dodge durango


I assume this truck has daul zone heating and a/c, the air blows but is not hot? if this is the case then you may have dissconnected the blend door actuator or it just went bad. this is common that the actuator goes bad,
there are two seperate actuators that control the hot/cold door in the heater box this way the passenger and driver can set there on temp.
the actuator for the drivers side is locted on the drivers side under the dash on heater box, the blower is on the passenger side , you can check connections but i do not think it is that but rather the actuator.

Jan 16, 2013 | 1999 Dodge Durango

3 Answers

Driver side blowing hot air passenger side blowing cold air


I'm having the same problem except on mine it's the driver's side that's blowing cold. Do you have the pictures in a finer resolution? I can't make them out and when I zoom, they are too grainy. Does the replacement require removing the dashboard? What's the general cost of the acuators? Are they readily available at like NAPA or other parts stores?

Nov 26, 2011 | 2006 Kia Amanti

1 Answer

2000 buick century blows cold air from passenger side but warm air from driver side


there is a drivers blend door actuator. the actuators are know to go bad. I know in toronto the dealer wants 80 bucks for the part. it easy to change. save yourself the money and do it yourself if you can

Aug 19, 2011 | 2000 Buick Century

1 Answer

This 2000 le sabre has a seperate control for the passenger to adjust temperature. the passenger side blows cold through the dash outlets . the drivers side blows uncooled air.is there an air door thats...


There is a door actuator motor not working,the dash has to be removed to access the actuator motor,if this was helpful,at all,please rate,thank you.

Jul 20, 2010 | 2000 Buick LeSabre

1 Answer

Cold air on passenger side and warm on the drive.


If the actuator door motors are working,then the door,itself,is broken,and is not moving with the actuator motor.

Jun 13, 2010 | 2000 Pontiac Bonneville

1 Answer

Passenger side only blowing cold air.


You need to replace the "blend" door actuator motor on the pass side. I recommend getting that from your nearest gm dealer to ensure proper fit. When you adjust the air from cold to warm to hot, the blend door moves to direct the right amount of cold, or warm, or hot air your desire on that side of the vehicle

Dec 04, 2009 | 2000 Buick Regal

2 Answers

200 Jeep Laredo..Air is cold and fan is blowing,


there is a blend door actuator for the laredo and if is bad the air wont come out here is a pic of what it looks like and how to get to it


The single zone heater-A/C system is equipped with a single blend door actuator. The dual zone system has two blend door actuators, one for the driver side blend-air door and one for the passenger side blend-air door.
7d2da02.gif
  1. Disconnect and isolate the negative battery cable.
  2. Remove the glove box from the instrument panel.
  3. Remove the three screws that secure the blend door actuator to the passenger side of the HVAC air distribution housing .
  4. Remove the blend door actuator from the air distribution housing and disconnect the HVAC wire harness connector from the actuator.
  5. Remove the blend door actuator from the vehicle
to instal
  1. Position the blend door actuator into the vehicle.
  2. Install the blend door actuator onto the passenger side of the HVAC air distribution housing . If necessary, rotate the actuator slightly to align the splines on the actuator output shaft with those on the blend door cam .
  3. Install the screws that secure the blend door actuator to the passenger side of the air distribution housing . Tighten the screws to 17 inch lbs. (2 Nm).
  4. Connect the HVAC wire harness connector to the blend door actuator.
  5. Install the glove box into the instrument panel.
  6. Reconnect the negative battery cable.

Sep 09, 2009 | 1998 Cadillac Seville

1 Answer

Heater working improperly


Check the actuator motors on the heater, there is two one for passenger and one for driver side. They allow the air to be directed from the heater or ac.

May 06, 2017 | 2000 Buick LeSabre

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Jonah Oneal

Level 3 Expert

14092 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...