Question about 2002 Kia Spectra

1 Answer

2002 kia spectra add transmission fluid 5 speed

How to check fluid tray

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Kia Master
  • 10,079 Answers

You can try out some guide from h ere reliable-store
they also provide live chat feature for instant help and it's very useful

Posted on Mar 12, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 8 Answers

SOURCE: 2002 Kia Spectra Transmission Fluid Check

located on driverside below the fuse box close to the firewal

Posted on Dec 22, 2008

Anonymous

  • 15 Answers

SOURCE: my 2003 kia spectra stalls

Hi,
It might have a partially blocked fuel line or ait intake supply.

  • Try to check your fuel filter.
  • The seive on the fuel pump.
  • The fuel injectors might be dirty.
  • The air cleaner might be clogged
or the fuel sensor might be malfunctioning.
Try to check the compression, it might be loosing compression when you demand the engine to move the vehicle.

Posted on Feb 01, 2009

WESLEY SCHACHT

  • 57 Answers

SOURCE: 2003 kia spectra check engine code p0604

I have bad news for you
p0604 is a transmission control module

check the connection at the transmission control module if there are no connection issues than you will need to replace the transmission controll module "tcm" there is no other test for that code.

good luck

wesleyschacht@hotmail.com

Posted on Jun 14, 2009

emissionwiz

Marvin

  • 85222 Answers

SOURCE: 96 Toyota Corolla

the fill pluig is on the side of the transmission case, to access this you must jack the car up and crawl under it to see the plug

Posted on Jun 29, 2009

Anonymous

  • 267 Answers

SOURCE: 2002 Kia Spectra Jerking Problem

check engine light comes of when the computer gets a sensor reading out of range. This could be an oxygen sensor(most likely) which will reduce performance of the engineand cause jerking. Most auto parts stores-autozone,advanced auto or O'rieley-will scan computer and tell you which sensor triggered check engine light. good luck

Posted on Apr 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What tool do I use to put trans mission fluid in my 2001 Vw Jetta


2001 Volkswagen Jetta GL Sedan (9M2) L4-2.0L (AEG)


Vehicle » Maintenance » Fluids » Fluid - A/T » Service and Repair » 5 Speed 09A Transmission
  • 5 SPEED 09A TRANSMISSION
ATF, Replacing
  • Remove sound insulation tray.
  • Place drip tray under transmission.

  • Remove drain plug (arrow) in transmission housing.
  • Drain ATF.
  • ***** in drain plug with new seal and tighten to 45 Nm .
If ATF needs to be topped up, then only ATF with Part No. G 052 990 A2 may be used.

Mar 12, 2016 | Cars & Trucks

1 Answer

How do I put transmission fluid in a 2001 Vw Jetta


2001 Volkswagen Jetta GL Sedan (9M2) L4-2.0L (AEG)


Vehicle » Maintenance » Fluids » Fluid - A/T » Service and Repair » 5 Speed 09A Transmission
  • 5 SPEED 09A TRANSMISSION
ATF, Replacing
  • Remove sound insulation tray.
  • Place drip tray under transmission.

  • Remove drain plug (arrow) in transmission housing.
  • Drain ATF.
  • ***** in drain plug with new seal and tighten to 45 Nm .
If ATF needs to be topped up, then only ATF with Part No. G 052 990 A2 may be used.
Hopefully if guessed the correct engine and automatic not standard!

Mar 12, 2016 | Cars & Trucks

1 Answer

When pressing gas, why does it feel as though tires slipping?


Sounds more like the transmission is slipping.check fluid make sure it doesn't look black or look like blood.or when you pull out the dip stick for the transmission the fluid doesn't smell burnt.if any one of these .take it to a tray shop.to get checked.

Nov 26, 2015 | 2004 Chevrolet TrailBlazer

1 Answer

How do i check the transmision fluid on my 2011 kia sportage


Its not simple, but can be done.Idle the engine for around 15 minutes to get transmission up to temperature. Lift the front of the car and remove the under tray. Locate a filler plug towards the lower edge of the valve body cover. While the engine is idling in Park remove the plug. If fluid runs out there is sufficient fluid. If no fluid runs out, add fluid through the filler until it runs out. This will leave the fluid at a minimum level, to get it to maximum level you must add another 700ml through the breather. Refit the filler plug, switch off the engine, remove the banjo fitting at the top of the cover, and add fluid through this hole. Check for leaks and refit under tray. Lower vehicle to ground

Sep 25, 2014 | 2011 Kia Sportage

1 Answer

Why is there leakage from the battery tray drain tube?


Acording to other sites could be issue with cruse control, fluids spilled in battery tray, battery leak, or resivours spewing fluids and collecting in there.

Nov 16, 2011 | 2006 Dodge Grand Caravan

1 Answer

How do I change or add transmission fluid to a 1998 Plymouth Grand Voyager


TO CHANGE THE FLUID YOU HAVE TO REMOVE THE TRANSMISSION OIL PAN IF YOU DO SO ADD 4 QTS BEFORE YOU START THE ENGINE THE YOU CHECK IT WITH ENGINE RUN TRANSMISSION IN NEUTRAL ADD UNTIL FULL YOU FILL IT FROM THE DIPSTICK TUBE THAT IS IN THE FRONT NEXT TO THE BATTERY TRAY

Oct 15, 2010 | 1998 Plymouth Voyager

1 Answer

I know very little about cars but I own a 2000


under your battery tray, you will see a big red knob, remove the knob using a funnel add tranny fluid until you can physically see it in the tranny
check with engine running!!!!

Jul 22, 2010 | 2000 Pontiac Sunfire

1 Answer

Wont go into 4wd but 4x4 light is on


check the diaphram underneath the battery tray.remove the battery and the tray.there is a diaphram with a vaccum line and a cable.check to see if transmission fluid has eaten the diaphram,quite common on high mileage vehicles.

Feb 10, 2010 | 2000 Chevrolet Blazer

1 Answer

I have a 2001 Dodge Caravan SE 2.4L 4 cylinder motor. I had the transmission flushed almost 2 years ago and since then have put 12,000 plus miles on it. All I know is you are suppost to check the...


You need to, at the minimum, change the fluid & trans filter. Easy proceedure. With van jacked up & blocked so it won't fall, use a large collection tray under trans pan & remove pan bolts. let oil drain into tray. use screwdriver to pry pan off. clean pan thoroughly & trans matting surface. Remove filter. You may need to adjust low rev band. Check with dealer or parts store for proper clearances. Put new filter on & tighten bolt[s]. Use new gasket & rebolt pan. Use gasket sealer on pan side only. You'll need 4-8 qts. of the proper tranny oil. Fill through trans. filler hole. Start engine & let warm up, check level & don't overfill or you'll have to suction out until level.

Sep 14, 2009 | 2001 Dodge Caravan

2 Answers

1988 volvo 740 problems


Here is what I found was the problem with my 1988 740 GLE Wagon.
Remove the phillips screw that holds the cigarette lighter in place. Now remove the ash tray. Next, pull the storage tray and cigarette lighter assembly and lay to the side.
You will see two trays, one with the fuses and one with the relays. The one you want to look at is the relay tray.
On the far left side of the tray and the 2nd relay from the back is the relay that engages the ignition when you turn the key to the start/ Run position.
It is very likely that is simply a bad connection where the relay pprongs plug into the socket in the relay tray.
wiggle and pull up on the relay assembly until it comes out of the tray.
Now just tweek the prongs slightly on the relay so they will make a firmer contact in the socket.
Now put the relay back in the same position it was in originally. Pull it back out and put it back in a couple of times to clean any corrosion oin the contact prongs.
Try to start the car now. This will probably correct the problem.
If not you may have to replace the relay because it may be defective.

Jun 16, 2008 | 1988 Volvo 740

Not finding what you are looking for?
2002 Kia Spectra Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...