Question about Peugeot 207

Open Question

The 2008 peugeot 207 model stops idling when reaches stop sign

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 261 Answers

SOURCE: corsica stalls at stop signs

sounds like the EGR valve is sticky, take a small screw driver and tap the valve when the engine is at idle and you will notice a change in the way the engine runs, if the vehicle smooths out disconnect the valve and drive the vehicle and it should not cut off please let me know and dont forget to rate me!!

Posted on Dec 02, 2008

Ad

Marko

  • 127 Answers

SOURCE: Break pads on a 207

hallo
remove two bolts from behind
Marko

Posted on Sep 30, 2009

gh20s

Greg W.

  • 343 Answers

SOURCE: when stopped at light/stop sign, rattling comes

Inspect the motor mounts for cracks or breaks in the mount. Ask a friend to stand at the right front fender with the hood open while you start the car. Make sure the emergency brake is on and you block one of the rear tires in front of it and in back of it with a brick or similar solid material. Put the car in drive (1st gear for manual transmission) and with your foot on the brake pedal rev the motor for a few seconds at about 1500-1800 rpm as your friend watches for excessive left and right movement from the engine. Then do the same in reverse and have him stand on the left side and do the same. If one mount is bad it is recommended that all the engine mounts be replaced. There are usually 2 or 3 for the engine and one for the transmission.

Posted on May 15, 2010

mike hayward

  • 279 Answers

SOURCE: How do you change the clock time on peugeot 207

with the ignition on press the 2 buttons on the clock together this will start you off in the language setting press the right button to scroll through languages untill you find the right one then press the left one to select this will then put you to the next step which i thunk is the date pres the right button to scroll the years then the left to select this moves you to month scroll with the right button then select with left and then do the same for the day after selectinc the day it will move on to the time starting with the mins scroll with the right and select with left do same for the hour

let me know if this helps
cheers

Posted on Feb 03, 2011

azcoyoterobb

Robbin L. Lull

  • 36 Answers

SOURCE: ESP / ARS fault with Peugeot 207

Nobody can give that...at best, a Guesstimate...but they will need to do some testing, Diagnosis...they charge by the hour, are good at what they do, and if they are real good, will be ASE Certified Mechanics...ask around, for good references...I don't know where you live, but in North Portland, (Oregon), there is a small shop on Interstate Ave., that works on them...good luck...

Posted on Jul 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Peugeot 207cc 2008 convertible model with a faulty fuel gauge, I can't find anywhere else that tells me where the fuel sensor is located and how I get to it. Please can you help


SPECULATION only... because Peugeots were not
commercially imported to the USA in 2008... BUT

TYPICALLY you must empty & drop the
"GAS TANK" to access the sender unit
(fuel - pump)...

It is a big enough job where it is certainly reasonable
to lift your rear mats to LOOK & see if access is available
(through the car floor) with the FUEL TANK in place...

http://www.mister-auto.co.uk/en/sender-unit-fuel-tank/peugeot-207-wa-wc-1-6-hdi-90hp_v19352_g605.html

I did check a Peugeot FORUM and an UNANSWERED
question remains...

Does any one know how to remove the BIG NUT that
holds the fuel sender in place??
207 fuel sender removal Peugeot 307 forum Peugeot Central

My guess = BIG WRENCH (spanner)...
Sadly I have found no AMERICAN companies
that list significant PEUGEOT parts or tools from
1991 to 2009
...

Hope this helps.

My suggestion would be to check the gage FIRST.

Carnac the Magnificent

Aug 28, 2017 | Peugeot Cars & Trucks

2 Answers

How can i find engeering marks for valve timing in a PEUGEOT 207 , 2008 MODEL?


No valve timing marks on that one - it won't allow you to change that settings.

Apr 26, 2015 | Peugeot 207 Cars & Trucks

2 Answers

Hi there, I have a Peugeot 207 1.6xs manual gearbox 2008 model and I recently replaiced the oil pump and filter and as I was driving back home from Peugeot pinetown, the vehicle displayed a fault which...


Worn main and rod bearings on the crank shaft. This is what creates the oil pressure. When the get worn they start loosing pressure. Also when the oil gets hot, it gets thinner, causing more lose of pressure.

Feb 07, 2015 | Peugeot Cars & Trucks

1 Answer

How to find powe steerig reservor peugeot 27


There isn't one, its electric power steering on that model . If the steering has got heavy check the appropriate fuse to make sure that hasn't blown, they should be listed in your handbook. If it has, replace it but keep an eye on it as fuses don't normally blow for nothing. If it hasn't blown then the motor has probably burnt out but that normally blows the fuse.

Jul 08, 2014 | 2008 Peugeot 207 GTi

1 Answer

Peugeot 207 1.4, small oil leak from underneath, added engine stop leak, how long before it stops leak?


oil leaks from underneath can come from front crank shaft seal --rear crank shaft seal --oil filter--sump gasket---power steering ---leaking rocker cover gaskets ---leaking oil pressure switch.--transmission seals. I suggest that you have the engine professionally cleaned and then put it on a hoist while running to see where the oil is from

May 14, 2014 | 2007 Peugeot 207 1.4

1 Answer

Where is the fuel filter on a Peugeot 207 cc


Fuel filters are only fitted to Peugeot petrol engined cars in countries where poor quality fule is an issue.

Sep 05, 2013 | 2008 Peugeot 207 CC

1 Answer

Fault finding Peugeot 207 temperature gauge stopped working


No need to sell the car if you get this problem, it is a common problem with the ECU and it can be repaired quite cheaply, as far as I can tell there is only one place that can repair this ECU at the moment - ecutesting.com. A full description of the symptoms for this fault can be found here: Peugeot 207 ECU Common fault

Jun 11, 2013 | Peugeot Cars & Trucks

2 Answers

Break pads on a 207


hallo
remove two bolts from behind
Marko

Sep 30, 2009 | Peugeot Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

scj103

Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...