Question about GMC Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
did you put it in nuetral then switch it, wait a few seconds then put in reverse and back up a couple of feet and nuetral again, i had to do this on my explorer sometimes.
Posted on Sep 22, 2008
Check the switch on the transfercase remove the vacume lines if there is oil in them the switch has to be replaced and the lines should be cleaned out you should also check under the battery tray to make sure the boot is not ripped that controls the leaver to engage the front axel
Posted on Feb 16, 2009
u will need a steering wheel puller,u will have to disharm and take airbag off if equip.,i would suggest to get manual it explains step by step procedure!
Posted on Apr 25, 2009
Yeah your right about waer but you might be blaming the wrong part. With the truck up on jack stands ( all wheels off the ground) have a helper drive the truck at the speeds that make the most noise you'll find it in the front axel or fround U joints or drive shaft splines ( drive shaft jumping ) You watch the parts moving and the joints or the cable that shifts the ront axel in and out not moving all the way it uses a vacume motor under the battery that has a cable going to the front axel. the clutches that are in the front axel have clips on them that hold the side gears that engage and disingage as you turn it on and off the clips break get lost fall off were out and let the side gears do as they please and they runinto each other a click and pop/ the cable and the shift fork that move them also fail but not htat much as the cable fails and the vacume leak pulls on a spring in two wheel and it may not be pulling hard enough/
Posted on Sep 17, 2010
Testimonial: "He's an Expert!"
Tips for a great answer:
Apr 01, 2015 | 2000 GMC Jimmy
Mar 15, 2015 | 1994 GMC Jimmy
Aug 24, 2014 | 1995 GMC Jimmy
Jun 08, 2014 | Cars & Trucks
Mar 30, 2014 | 1999 GMC Jimmy
Jan 17, 2012 | 1988 GMC Jimmy
Jan 31, 2010 | 1987 GMC Jimmy
Apr 06, 2009 | 1989 GMC K2500
Nov 24, 2008 | 1999 GMC Jimmy
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: