Question about Peugeot Cars & Trucks

Open Question

PEUGEOT 207 1.4 2009 TIMING BELT MARKINGS

Timing belts markings

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
justuscc

Jimmy

  • 360 Answers

SOURCE: installing a timing on a daewoo lanos

theres a line on the crank facing down. the cams have a line that need to face one another. good luck save as fixya thanx

Posted on Sep 23, 2008

Ad

Anonymous

  • 2 Answers

SOURCE: !999 Daewoo Lanos

201b665.jpege046938.jpeg

It verifies well the year, it is of one of 1999

I hope that it should serve you

Posted on Oct 21, 2008

colin white

  • 345 Answers

SOURCE: timing belt

there is a tool to fit in the flywheel if you carnt get the tool use a 6 or 8mm bolt,if you line up the camshaft first the hole in the flywheel just under the starter motor will line up

Posted on Oct 23, 2008

to315

  • 122 Answers

SOURCE: Timing Belt Markings

Mark are on the crank and cam timing gears. Cam gear mark at 12 o"clock crank gear mark lined up with TGC mark on block when installing timing belt.

Posted on Feb 21, 2010

Patrick Rayome

  • 1757 Answers

SOURCE: timing belt on huyndai accent 2001

My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions. I have only been on this site for the past 4-months as a free contributor.

I do not know if you still need this information, however I am answering it - in case you still do.

Click on the following direct Link. It has several Diagrams for your 2001 Hyundai Accent Timing Belt and Marks.


Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2001/make/hyundai/model/accent/2001_hyundai_accent_timing_belt_diagram_marks.htm

Posted on Mar 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing timing belt; need timing belt markings for 2000 mazda protege


If it has the twin camshafts, then you need to align the bottom crankshaft pulley marking (there's only one marking at top dead centre). Then you'll need to align the two camshaft pulleys. You need to use the first two sets of markings and then double check the markings on the camshafts themselves, within the valve cover area. Always double check the crank shaft sensor is aligned properly on re-assembly as misalignment will result in a non-start and you might doubt your own work. Don't worry about timing belt failure or misalignment on the twin cam engine as this is a "safe-engine" and will not result in any damage.

Oct 30, 2012 | 1998 Mercedes-Benz CLK

1 Answer

Need timing belt diagram for a 2003 tiburon gt v6 2.7 liter


The timing belt diagrams are listed in detail with figures and procedure to remove them.

REPLACING TIMING BELT ON A 2003 HYUNDAI TIBURON 2.7L V6

1. Remove passenger side headlight via the 3 10mm screws holding it in place and disconnect the turn signal and main harness

2. Remove passenger side tire

3. Remove the splash guard via 2 10mm screws at the top of the guard

4. Remove the 2 17mm bolts and 2 17mm nuts from motor mount bar

5. You may have to separate the mount bar from the motor via either a chisel or flathead screwdriver and a hammer ( support engine via a jack and a piece of plywood under oil pan )

6. Use a 3/8 ratchet ( or a long breaker bar would work better ) to remove the serpentine belt ( remember the route ). Disconnect the power steering hose from the pump and secure back with a zip tie. Remove the power steering pulley with a pry bar and 19mm socket.

tinualbinale_2.gif
7. Hand turn the crankshaft via a 22mm socket to TDC ( top dead center, marked on lower timing belt cover )

8. Remove the serpentine belt tensioner via 2 12mm bolts on each side

9. Remove the upper timing belt cover via 7 10mm screws

10. Remove crankshaft pulley ( 22mm ) with an air impact gun ( an electric one will work too )

11. Remove lower timing belt cover via 4 more 10mm screws



tinualbinale_3.gif

12. Remove the motor mount from the block via 3 14mm bolts and 2 12mm bolts ( there is a 12mm holding the oil dipstick bracket towards the front of the car )

13. Remove the auto tensioner via 2 12mm bolts

tinualbinale_4.gif

14. Remove the timing belt
tinualbinale_5.gif

15. Make sure your timing markings are correct...

There is one marking on each cam gear and on the heads ( head markings are small, look closely...try wiping the edge of the head down with a rag and some brake cleaner to bring it out more ) They are also pictured in last pic.

When the crankshaft is in the TDC position, the cam gear markings should both line up at the same time with the head markings

Adjust if necessary, use a 17mm socket to turn cam gears to correct position

16. Install new timing belt ( as you install it, make sure to keep a little tension on the belt as you route it )

17. Install new auto tensioner and pull pin

18. Install just the lower timing belt cover

19. Install the crankshaft pulley

20. Hand turn the crankshaft atleast 5 times to verify the timing markings are lining up properly ( all should line up at the same time when the crankshaft pulley mark is in the TDC position )

21. Remove crankshaft pulley

22. Remove lower timing belt cover

23. Reverse steps 12 - 1

You can refer the videos below for further assistance.Your valuable feedback would be appreciated.Thanks for choosing Fixya.


Jun 10, 2011 | Hyundai Tiburon Cars & Trucks

2 Answers

Diagram of markings on timing belt


I repaired a 3.1 4JG2 but the mechanic doesn´t know how to set the injection time. I can see the marks on the crank and camshaft as well as the inyection pulley but if I try to install the belt "just like that", the injection goes wrong with explosions and white smoke. Can anyone help please? Is there any other procedure to follow to time the inyection?
thanks in advance

Jun 30, 2010 | 1996 Isuzu Trooper

1 Answer

Timing marks on a 2000 volvo v40 1.9t crank and cam marks


Timing belt alignment markings


9c6ff12.gif

Here is all the tech info for removing and replacing....hope this helps you:

4-Cylinder Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    • Negative battery cable
    • Right hand engine cover
    • Cover over the right headlamp
    • Accessory drive belt
    • Front timing cover
    • Servo reservoir
  3. Position Volvo lifting beam 999 5006 or equivalent slightly in front of the front lifting eyelet for the engine. Use Volvo lifting arm 999 5383 or equivalent and Volvo lifting hook 999 5460 or equivalent to raise the front of the engine a few millimeters.
  4. Remove or disconnect the following:
    • Right-hand engine mount
    • Right front wheel
  5. Turn the crankshaft until the markings on the crankshaft and camshaft pulley correspond. Turn the crankshaft a further 1/4 turn clockwise and then back again until the markings correspond. The markings are illustrated. Remove the upper timing cover.
  6. Slacken off the center screw for the belt tensioner slightly.
  7. Turn the tensioner clockwise to 10 o'clock.
  8. Remove or disconnect the following:
    • Air baffles
    • Lower belt cover
    • Timing belt


To install:
  1. Turn all the pulleys listening for bearing noise. Check to see that the contact surfaces are clean and smooth. If the tensioner pulley lever or idler is seized, replace it.
  2. If replacing with a new idler pulley, tighten to 18 ft. lbs. (24 Nm).
  3. If replacing tension pulley, screw into place using the center bolt by hand. Ensure that the tensioner fork is centered over the cylinder block rib. Ensure that the Allen hole on the eccentric is at "10 o'clock".
  4. Install the timing belt in the following order:
    1. Around the crankshaft sprocket
    2. Around the idler pulley
    3. Around the camshaft sprockets
    4. Around the water pump
    5. Onto the belt tensioner
  5. Carefully turn the crankshaft clockwise until the timing belt is tensioned. The belt must be tensioned between the intake camshaft pulley, the idler pulley and the crankshaft
  6. Hold the belt tensioner center screw secure. Turn the belt tensioner eccentric counter-clockwise until the tensioner indicator passes the marked position.
  7. Then turn the eccentric back so that the indicator reaches the marked position in the center of the window and tighten the center bolt to 15 ft. lbs. (20 Nm).
  8. Press the belt to check that the indicator on the tensioner moves easily.
  9. Install or connect the following:
    • Lower belt guard
    • Air baffles
    • Upper timing cover
  10. Turn the crankshaft two turns. Check that the markings on the crankshaft and camshaft pulley correspond.
NOTE Check that the indicator on the belt tensioner is within the marked area.

  1. Install or connect the following:
    • Lower timing cover
    • Front timing cover and tighten to 9 ft. lbs. (12 Nm)
    • Accessory drive belt
    • Engine mount and tighten to 49 ft. lbs. (67 Nm)
    • Servo reservoir. Tighten bolts to 37 ft. lbs. (50 Nm).
    • Front wheel
    • Right hand engine cover
    • Cover over the right headlamp
    • Negative battery cable

May 04, 2010 | 2000 Volvo V40

1 Answer

Need timing belt markings for 1989 mazda 929


check aboutauto.com they might have it

Mar 30, 2009 | 1989 Mazda 929

1 Answer

Timing Belt Markings


Mark are on the crank and cam timing gears. Cam gear mark at 12 o"clock crank gear mark lined up with TGC mark on block when installing timing belt.

Dec 16, 2008 | Hyundai Motor 2002 Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

scj103

Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...