Question about Daewoo Cars & Trucks

Open Question

Daewoo nubira pulse problem 2lt engine - Daewoo Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: daewoo nubira power windows

Dont buy a daewoo

Posted on Sep 07, 2008

Ad

Anonymous

SOURCE: 2000 daewoo nubira brake light problem.

Thanks to your advice my problem is solved. A big fixya is in order. Thanks again

Posted on Oct 07, 2008

Anonymous

  • 61 Answers

SOURCE: timing marks for a daewoo nubira cdx

Here is a pic if the timing marks two small marks on the cam pulleys and one small cut away on the crank pulley .
3d2c66e.png

Posted on Jan 19, 2009

Anonymous

  • 74 Answers

SOURCE: change alternator on daewoo nubira

first you need to remove the belt . there are only several bolts to remove the alternator . there should be a diagram on the panel by the hood prop rod to show the belt route

Posted on Feb 18, 2009

Anonymous

  • 1 Answer

SOURCE: replacing timing belt on daewoo nubira 2000 model

Instructions Difficulty: Moderate Things You’ll Need:

  • Set of ¼-inch drive sockets ¼-inch drive ratchet Set of ½-inch drive sockets ½-inch drive ratchet Set of 3/8-inch drive sockets 3/8-inch drive ratchet Set of metric wrenches Floor jack Jack stands
Step1 Raise and support the vehicle on jack stands. Remove the intake air temperature wiring, the breather hose and intake air hose. Take off the air cleaner assembly. Step2 Remove the right wheel. Remove the accessory belts. Remove the crankshaft bolt and the crankshaft pulley. Remove the power steering bolts and the timing belt covers. Temporarily install the crankshaft bolt and turn the engine clockwise until the mark on the crankshaft pulley, which is a triangle stamped into the crank sprocket, is aligned with the corresponding triangular mark on the block. Step3 Make sure that the timing marks are aligned on the camshaft sprockets. These are a line on each sprocket that runs through a tooth on each sprocket. These lines should line up in the middle between each sprocket and point toward each other. If they do not line up, turn the crankshaft one more time and they will line up. It takes two turns of the crank to one complete revolution of the cam. Step4 Loosen the water pump bolts; using the 3/8-inch ratchet, turn the water pump clockwise away from the belt and loosely tighten the bolts to keep it there. Remove the timing beltmag-glass_10x10.gif. Make sure the timing marks are aligned and install the new belt starting on the right side from the crank sprocket and working counterclockwise. Keep all the belt tension on the right side away from the tensioner. Step5 Loosen the bolts in the water pump and rotate the water pump counterclockwise to apply tension to the belt. Watch the tensioner, which is above the water pump, and apply tension with the water pump until the pointer on the tensioner lines up with the notch above it. Lightly tighten the water-pump bolts. Step6 Turn the engine two more times and align the timing marks perfectly. Loosen the water-pump bolts and, using the ratchet, apply tension to the belt until the tensioner pointers are aligned. Tighten the water-pump bolts. Step7 Install the timing-belt covers and the bolts in the power-steering pump and tighten. Remove the crankshaft bolt and install the crank pulley and the bolt, then torque the crankshaft pulley bolt to 70 foot pounds of torque. Install all components in reverse order of removal.

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a diagram for timing for a daewoo


There is 2 possibilities. if it has the marks on the valve cover as in the first picture then use those to align the cam gear timing marks to. If no marks on the valve cover then point the cam gear timing marks at each other as per the pictures then align the crankshaft timing marks as pictured.

25112305-go2qkqusq2vchyq30ywu0a0h-5-0.jpg

25112305-go2qkqusq2vchyq30ywu0a0h-5-1.jpg

25112305-go2qkqusq2vchyq30ywu0a0h-5-3.jpg

Sep 18, 2014 | 2000 Daewoo Nubira

2 Answers

Where is cramshaft located on deawoo nubira 2000


Look here V, reasonable mechanical knowledge is required to repair the engine.
2000 Daewoo Nubira engine diagram Google Search

Mar 25, 2014 | 2000 Daewoo Nubira

1 Answer

Where is the radiator cap on a 2000 daewoo nubira


Your coolant reservoir is on the side of the battery, has a yellow cap with a shell alike engraving. Just be sure that engine is cool before to open it; remember safety first!
George M

Mar 07, 2012 | 2000 Daewoo Nubira

1 Answer

What are the torque specifications and tightening sequence for cam journal and cylinder head for 2001 daewoo nubira 2.0 :(


  1. The torque settings for the cylinder head bolts on a daewoo ...

    www.answers.com > ... > Categories > Cars & Vehicles > Asian Car i need how much pression (torque) for head daewoo nubira 2001 2.0 ... What is the cylinder head torque specs for a 2001 daewoo nubira 2.0 litre engine and ...

Apr 15, 2011 | 2001 Daewoo Nubira

3 Answers

Need cam torque specs


1999 to 2002 - 2.0L DOHC

Camshaft bearing cap bolts intake and exhaust.

N.m (INCH LBS)
8 ( 71 )

Jan 23, 2010 | 2001 Daewoo Nubira

1 Answer

How can I replace a freeze plug on a 2000 daewoo nubira?


Yes, use a quality replacement and tighten to get a good seal. They hold forever.

Dec 27, 2009 | 2000 Daewoo Nubira

1 Answer

2000 Daewoo Lanos 16v sx sport How do you know when the timing is out because car jerks alot . When I stand at a robot ,the CAR REV'S on it's own.


i need to change daewoo nubira engine model 2000 sx 1.6 with the gear box so which engine and gear should i search for tks

Aug 07, 2009 | 1999 Daewoo Nubira

2 Answers

Car will not start - Daewoo Nubira


my daewoo nubira sedan year 2000 model will not start foe some reason i try to hit the button on my immobilizer to switch it off but it does nothing and that red light near the dash keeps flashing anyone no how to solve this problem?

Jul 06, 2009 | 2002 Daewoo Lanos

1 Answer

Crankshaft position sensor


Here is a Pic of the location The arrow points to the CKP (crank position sensor) It is next to the pulse wheel.
008e032.png

Dec 14, 2008 | 2002 Daewoo Nubira

1 Answer

Daewoo nubira 2002


hi there, im guessing your crankshaft sensor has been damaged. its located under the crankshaft pulley.

Aug 25, 2008 | 1999 Daewoo Nubira

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

459 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...