Question about Peugeot Cars & Trucks

Open Question

Peugeot partner year 2004 1900 diesel wiper stalk

Wiper stalk works for front washers but seems to be solid when trying to put rear wiper on

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Windscreen wiper not working

check the switch on the steering usualy it becomes faulty after a while and also your window washers could be blocked but try turning it on if you do not hear a buzzing sound the motors needs to be replaced.

Posted on May 21, 2008

Ad

Anonymous

SOURCE: Windscreen Washer

If it is the same as some other Chevrolets they have 2 pumps attached to the side of the washer bottle. 1 for rear and 1 for front windscreen

Posted on Jul 31, 2008

freetek

Steve Allison

  • 5569 Answers

SOURCE: wiper washer

You didn't mention any lost fluids so we can assume that no hapless mechanic has accidentally pulled any tubing loose from the supply. 
If, as in many cars, the path of the tubing connecting the washer fluid bottle to the jets on the cowl are visible, carefully pull one the tubes loose and have someone operate the washer to see if the pump is doing anything any more. You may be able to find the 'Y' junction where the tubes split off to feed the two jets.
The rear window washer has its own fluid supply and pump so is completely independent of the front.
If you find the pump working, then you will have to carefully poke a soft, small gauge wire, preferably copper, to try to clean the jets themselves. You probably have some small bits of something clogging the jets and it can help if someone is keeping the washer pump running while you try to clear them as the pressure will aid you.     
Worst case, the jets can often be replaced fairly easy and at a cost of a few dollars. 

Posted on Sep 21, 2008

Anonymous

  • 1 Answer

SOURCE: odyssey rear window washer fluid not spraying where is reservior

The reservoir is the same one for the front washers. There are two electric pumps on the base of the reservoir (one for front and one for rear). You probably need a new pump. It is accessible behind the panel in front of the front right wheel.

Posted on Jan 31, 2009

SOURCE: rear wiper does not work at all. front wipers work

1. check the fuse to the rear wiper motor
2. check for power to rear wiper motor at the motor (power wire going in to the wiper motor with rear wiper switch on)
If you have good fuses & have power going in to the rear wiper motor...
3. Pull old rear wiper motor and install a new rear wiper motor.
Thank you please drive thru......

Posted on Feb 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear wiper notworking


Hey Joe , what make model an year vehicle ?

Apr 08, 2015 | Cars & Trucks

2 Answers

2010 Reg Ford Focus 5 door hatch rear screen wash not working. Front is OK. How do I fix it?


the washer fluid could be empty / the fuse for the wiper blew / the relay went bad /if you tried to use the wipers without clearing ice away you blew the fuse/ if you just put water in instead of washer fluid it's frozen/ if the wiper works and there is windshield fluid in the tank and not water and all fuses are good the pump motor for the fluid went and is easy to change

Feb 25, 2015 | Ford Cars & Trucks

1 Answer

Where on your dash board is the switchfor rear door window wiper and washer


Hi
This depends on the vehicle model, however often as not you can find the switch on the same stalk as the front wipers, turning the end of the stalk in the opposite direction to the front wipers, or gently pushing down or pulling up on the stalk (similar action to turning on/off high beam on the headlight stalk) or perhaps gently push forward or pull back (similar action to activating the turn signals) If this does not help locate the switch, please add your vehicle type in the comment box of your original question post.
Trust this helps regards Alan

Feb 13, 2015 | Cars & Trucks

1 Answer

Rear windscreen washes when stalk pulled forward?


It should be that when you pull the stalk towards you the front wiper/headlight wiper operate, away from you for the rear wiper. It hasn't just rewired itself, and miswiring seems quite unlikely.
2005 VOLVO XC90
Has it been dismantled? Has any other electrical work been done near relays or fusebox?
Some history would be useful. I'm also wondering whether it could also be changed by programming the computer? If you don't have any history I would join a volvo forum and seek further advice before you start dismantling the stalk wiring.
not sure where you are in the world so here are a couple
Volvo XC Forums
Volvo Forums Volvo Enthusiasts Forum Powered by vBulletin

Jun 20, 2014 | 2005 Volvo XC90

1 Answer

Where is coolant ect sensor on belingo 1.9 diesel could this cause the van not to start afet overheating


what country , what year, C
XUD diesel or
DW8 diesel.
its a
Citroen Berlingo and Peugeot Partner

in 2008 Fiat is partner... complex.
so what year, and what country sold.? as always for ever and ever.

Oct 12, 2013 | Cars & Trucks

2 Answers

I have a 1996 peugeot partner 1.8 diesel van running problems


Better would have been to get the diesel injectors checked too.( Cleaned and calibrated )
Hope the injector pump timming is set correctly!

Jan 31, 2010 | 1991 Peugeot 405

1 Answer

Trying to locate a source for 2000 - Volkswagen - Golf Lift gate, Wiper and washer components, Wiper motor, Wiper motor. Just the motor!


The motor is behind the glass inside the car. The wiring harness is behind the plastic panel and snakes to the right side of the car, going up towards the hinges and comes out to a rubber boot and into the right C pillar snaking it's way to the front. Up front, it snakes towards the wiper switch (right stalk) then towards the relay above the clutch area. The washer which both the front and the rear shares one reservoir inside the engine compartment.

Hope this is the answer you 're looking for.

Jan 25, 2010 | 2000 Volkswagen Golf

2 Answers

Wiper not working ford galaxy m2


No solution sorry - mine have done exactly the same - will wipe front screen if you mess with the stalk - rear wiper works when you push the stalk forwards or backwards but no washer to either - have you found a solution? Kind regards - Andy

Jan 04, 2010 | 2005 Ford Futura

1 Answer

Were is the back wiper switch located for VW polo's from 1997? mine doesnt seem to be working. Thanks. (I had to select Golf from the products gallery as Polo doesnt seem to be on the drop down menu.)


on the right stalk the tiny button on the end of it clicks in for the rear wiper and push the hole stalk towards the speedo and hold for rear wiper and washer.

May 09, 2009 | 1997 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

scj103

Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...