Question about 2003 Kia Sorento
Three days ago my key was stuck in the ignition on my 2008 Kia Sedona. I could start it. I could shut it off and the key would turn to the acc. position but it wouldn't go to lock so I could pull the key out. I unhooked the battery cable and the key came right out everytime.
I called service departments at two different dealerships and they were no help. One dealership told me the switch was in the transmission and he thought they would have to go in deep to fix it. The other one told me it was either in the ignition switch or it was an electrical issue they would have to track down. I guess the last one was kind of right but this is how I fixed it. Just understand my problem might be different than yours. This worked for me and I feel it's worth trying. It wasn't a hard fix once I dug in and found the problem.
I want to say that this is just for "Informational Purposes Only". Even though this should be an easy enough of a fix just understand "I am not responsible for accidents." Use your head and you should be fine.
1. I took the trim cover off around the gear shift. It just pops off but still be careful not to force it or you will break it. No need to unhook the wires once it is off. Just let it hang to the passenger side out of the way.
2. Hook your battery up if it isn't already. This might sound strange to some because normally you unhook your battery before working on a car but you need power to check this problem.
3. (O)Make sure your PARKING BRAKE is set.(O)
4. Locate the key release microswitch under the left side of the black cover plate that has Park, Rev., Neutral, and Drive on it. Between the cover plate that I just mentioned and the interior molded console itself is where I could see the microswitch but only with a flashlight. It's actually mounted under the area where the P, R, N, and D are located on the cover plate so while sitting in the driver seat you will need to bend down with your light and look up under the cover plate. (If you don't see it try this.) Turn your key on and press the brake to release the gear shift button. While looking under the cover plate and pushing the gear shift button repeatedly you can see the parts under the cover plate pushing up on the microswitch.
(Here is where I noticed my problem. When I let go of the gear shift button there is a plastic piece that pushes up on the lever of the microswitch making it close the circuit. The problem was the plastic piece wasn't pushing the metal lever of the switch "far enough" to close it. I fixed it like this.)
5. I reached in with a small long screwdriver and placed the screwdriver under the middle of the metal lever on the microswitch. With another small screwdriver I reached in and pushed in the end of the lever down just slightly. It will bend easily. Make sure to hold pressure up with the first screwdriver against the middle of the metal lever to keep it from bending back at the switch. I was afraid it could break the switch if I hadn't done that. It took a couple of tries not to bend it too much.
6. Try pushing the gear shift button now and release it.
If done right the switch should close. I could hear a relay click in the ignition switch when it closed. The key then pulled out everytime like there was no issue.
7. If it worked put the the trim cover back on and I hope you never have any problems with it again.
If it didn't work try engaging the switch with a screw driver and see if you hear the clicking in the ignition. (Make sure your battery is hooked up for this or your wasting your time. I'm just saying.) If it doesn't make a clicking sound or if your key still doesn't remove than it has to be either that this microswitch is faulty, ignition switch or something else completely. At that point hope you have a good service department where you live.
I couldn't find anything anywhere on the web that helped with this issue so I hope this does help someone else who has been in a bind. Good Luck!
Posted on Feb 18, 2012
Disconnect the battery and the key should release.
Make sure there is nothing stuck within the transmission shifting compartment that would prohibit it from going FULLY into park.
Within the transmission shifter lever compartment there are a couple of screws and a pin that can come loose and the ignition will not recognizing the vehicle is in the park position, therefore the key cannot be removed.
This may have nothing to do with the ignition switch. I've also read people solving this [problem by checking their wiring. Some were loose. But either way, I'm guessing you car doesnt know it is in park.
Posted on Dec 07, 2009
I found the issue was the T-Handle jumped the rail. I followed the directions JH listed to remove the key which were very helpful. Once I was able to see the micro-switch it was obvious the rod in the shifter had not returned to the upper position. I removed the two Phillips head screws on the T-Handle, pulled up and the rod went back into place. I expect this occur I was playing with the "sport" shifter earlier in the day.
Posted on Mar 02, 2014
If you can not get key out. You need to replace the ignition switch cylinder assembly.
Posted on Oct 07, 2009
If your steering wheel is locked, you need to grab the steering wheel and turn it in the direction it is locked (it will move only one way so give it a good amount of pressure and it should allow you (while turnining the wheel to release your key) So in other words try turning your steering wheel either even further to the right or even further to the left. Please report back if i helped you out.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/matthew_d24b835e574ef6ca
Posted on Oct 07, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 22, 2018 | Kia Cars & Trucks
Nov 13, 2017 | Kia Cars & Trucks
May 02, 2015 | Kia Cars & Trucks
May 16, 2014 | 2004 Kia Sorento
Oct 29, 2012 | 2004 Kia Sorento
May 15, 2011 | 2004 Kia Optima
Jul 22, 2010 | 2004 Kia Optima
Apr 11, 2010 | 2004 Kia Sorento
9,508 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: