Question about 2004 Mitsubishi Lancer
First pop the hood and find the serpentine and alternator belts on the left side of the engine compartment. The serpentine belt runs around four pulleys. The alternator belt uses two pulleys. They share space on the drive shaft so they are right next to each other.
Of the four pulleys using the serpentine belt, three of them are vertically in line (closer to the front of the car) and the fourth stands alone (closer to the cab). Of the three vertically in line, the middle pulley is the one used to adjust the tension on the belt.
You must first break loose the bolt in the center of the tension pulley (the bolt is facing the passenger tire) by turning it counter clockwise. Then leave that bolt and go to the bolt connected frame connected to the other side of the tension pulley (this bolt is facing the front of the car). Turn that bolt counter clockwise until the serpentine belt is loose enough to pull off. Replace the belt and tighten in the opposite order. Once the desired tension is reached, crank the car and run it for a few minutes. Finally cut the car off and check the tension, tighten or loosen as neccessary.
Posted on Oct 10, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 02, 2013 | 2003 Mitsubishi Lancer
Apr 13, 2011 | 2003 Mitsubishi Lancer
Fig. Accessory drive belt routing-2.0L (DOHC) engine
Fig. Accessory V-belt routing-Mitsubishi 1.5L, 1.6L, 1.8L, 2.0L and 2.4L engines
Hope helps (remember to rate this ansswewr).
Jan 05, 2011 | 2003 Mitsubishi Lancer
Aug 13, 2010 | 2003 Mitsubishi Lancer
Mar 15, 2010 | 2003 Mitsubishi Lancer
Jan 13, 2010 | 2003 Mitsubishi Lancer
Sep 17, 2009 | 2003 Mitsubishi Lancer
Jun 20, 2009 | 2003 Mitsubishi Lancer
Sep 09, 2008 | 2003 Mitsubishi Lancer
335 people viewed this question
Usually answered in minutes!