Question about 1998 Ford Windstar

1 Answer

Change tag light bulb - 1998 Ford Windstar

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 58 Answers

  1. Remove two screws retaining the lamp to the rear license plate lamp shield.
  1. Rotate socket one quarter turn from backside of lamp and remove the miniature bulb (13466) .

  1. Install new miniature bulb into socket.
  1. Install socket in lamp .
  1. Secure lamp to rear license plate lamp shield with two screws and tighten to 2 Nm (18 lb-in).


    change tag light bulb - ak1473a.gif


    Item Part Number Description 1 13508 Rear License Plate Lamp Shield 2 14A583 Lamp Lead Wire 3 383356-S Nut (4 Req'd) 4 56000-S Screw (4 Req'd) 5 13550 Lamp (2 Req'd) 6 13466 Miniature Bulb (2 Req'd) A — Tighten to 2 Nm (18 Lb-In)

Posted on Feb 27, 2010

Ad

2 Suggested Answers

Anonymous

  • 3 Answers

SOURCE: both my rear license tag lights are out How do I change the light bulbs?

if you squeeze the plastic housing around the light they will pop out with little force from the outside. then you just change your bulb and replace

Posted on Sep 13, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: how to change tag lights

I had to remove the entire light bar assy by taking every bolt loose to gain access to replace the tag bulbs on my 2000 Buick Lesabre. It is necessary to replace only one bulb so I replaced all bulbs with the new longer lasting bulbs...the bulbs are not expensive just impossible to gain access to them one at a time. It seems like GM made it so you would have to take it into the GM Dealer. A deep well socket makes the task muck easier! Hope this helps!

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse for tag lights on 88 chevy c1500 silverado


There is not a separate fuse. The tag light is powered off of the tail lights. If you have tail lights but no tag lights your problem is either bad tag light bulbs or the connections between the tail lights and the chassis ground at the tag light bulb sockets.

Dec 19, 2017 | Cars & Trucks

1 Answer

It's a 2002 bmw 745i dash sayinsaying licence light malfunction front headlight malfunction left turn signal malfunction what's the problem


Change the license tag light bulb.
Change the left turn signal light bulb.
Change the headlight bulb.

Mar 29, 2017 | BMW 745i Cars & Trucks

1 Answer

My tag light in my 99 Ford Windstar not working even after I changed bulbs


Check the wiring to that socket. Possibly a wire broke or bad bulb socket. The license plate light is only a splice from the tail light wires, so if both or all tail lights work from the park/headlight switch, the tag light problem is right there at the rear. If you have a voltmeter or a test light, check for power to the bulb socket with the park lights on.

Sep 15, 2015 | Ford Cars & Trucks

3 Answers

I got pulled over for my tag light being out what fuse controls that tag light?


same lite that control your parking lites. most likely the bulb has burned out. you can acces this from behind the bumper. it usuall twists to unlock the cover to the lite

Jan 20, 2011 | Ford Focus Cars & Trucks

1 Answer

How do I change tag lights on 2002 Buick Rendezous


Open rear door, remove the screws holding the light into the car frame. Pull out the whole light package, you can now easily access the bulbs.

Feb 14, 2010 | 2002 Buick Rendezvous

1 Answer

Change tag light on chevy cobalt


the bulb would be less than 5 bucks

Feb 11, 2010 | 2003 Chevrolet Malibu

1 Answer

How to change tag light on 2000 buick lesabre? Or maybe some pictures and discriptions on what to do!


Remove Trunk Inner Panel At Rear of trunk and then gently twist the light electrical plugs and replace bulb.....

Dec 16, 2009 | 2001 Buick LeSabre

1 Answer

Change tag lights out


On models through 1995,remove 2 screws holding light assembly,remove cover and pull bulb out.
From 1996 on,change bulbs from inside trunk or trunk lid.Remove plastic 'push pins' holding fabric or plastic trim panel,turn bulb socket counter-clockwise and remove.Pull bulb straight out of socket.

Oct 19, 2009 | Mercury Sable Cars & Trucks

1 Answer

How to change tag lights


I had to remove the entire light bar assy by taking every bolt loose to gain access to replace the tag bulbs on my 2000 Buick Lesabre. It is necessary to replace only one bulb so I replaced all bulbs with the new longer lasting bulbs...the bulbs are not expensive just impossible to gain access to them one at a time. It seems like GM made it so you would have to take it into the GM Dealer. A deep well socket makes the task muck easier! Hope this helps!

Jan 07, 2009 | 2000 Buick LeSabre

1 Answer

Both my rear license tag lights are out How do I change the light bulbs?


if you squeeze the plastic housing around the light they will pop out with little force from the outside. then you just change your bulb and replace

Aug 30, 2008 | 1999 Chevrolet Blazer

Not finding what you are looking for?
1998 Ford Windstar Logo

3,484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...