Question about 1992 Pontiac Bonneville
Here is a wiring diagram of how you should by-pass that cooling fan by using a toggle switch, and you can get a fuse holder and use a 30 amp fuse instead of a 30 amp circuit breaker, but you should use the circuit breaker since you are no longer using a relay, and if there is a voltage spike the circuit breaker will reset itself, and a fuse will blow out and you will have to change it. Most auto parts stores will carry the 30 amp toggle switch and circuit breaker, also be sure to use 10 ga. wire and do not forget the wire connectors that you will need to attach the wires to the toggle switch, the circuit breaker, and to the battery as well as the connection to the cooling fan wires.
This wiring diagram is very basic and you should be able to follow it with little difficulty, and you should also dis-connect the cooling fan at the wiring connector to the cooling fan and connect the by-pass wiring directly to the cooling fan motor so that you do not run voltage back through the stock system. Let me know if you require further assistance.
Posted on Jun 04, 2010
I had a similar problem. try getting a electric fan, then wire it up to ur battery, and have a toggle switch inside. u need to turn it on before u start engine, then turn off when u turn motor off.
Posted on Jun 04, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
the cooling fan should come on about 105-107C and shut off about 95-97C
does the car overheat just sitting running not moving
but if the car overheats on the highway then it's not the fan
check the fan operation run the car till the gauge is over half and watch the fan
if the fan woks then check coolant level if that's ok then try a thermostat
Posted on Nov 19, 2009
Testimonial: "Took car to mechanic and found engine bottom seal letting in air, mechanic estimate crack seal,causing air in and shutting down car. Expensive repair"
If you are not the first owner it may be wired to the ignition, Previous owner may not have been able to get it to come on?
Posted on Aug 31, 2012
Tips for a great answer:
Oct 27, 2015 | 2008 Ford Escape
Feb 27, 2017 | Lincoln Cars & Trucks
Sep 05, 2013 | 1998 Honda Civic
May 25, 2013 | 1995 Oldsmobile Achieva
Jul 19, 2011 | Ford Mustang Cars & Trucks
Nov 12, 2010 | 1997 Chevrolet Lumina
Mar 13, 2010 | Chevrolet Celebrity Cars & Trucks
Feb 19, 2010 | 1990 Pontiac Firebird
1,443 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: