Question about 2006 Dodge Ram 3500 Truck

1 Answer

I have a 2006 dodge with a 5.9 liter cummins. The ac went out I had the freon checked with a friend there was plenty. I took it to a mechanic he seems to think it is the integrated power module. I have heard dodge has had alot of problems with this the part cost about $800. Is there an after market replacement at a lower price? And what was the warranty on this part?

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 10,543 Answers

You might want to locate the part from a junk yard.You can try online parts stores too.

Posted on Sep 14, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 333 Answers

SOURCE: dodge spirit flasher location

You remove a few phillips head screws on the cover beneath the dash under the knee panel. The hood release is attached to the panel. You can reach it from below or remove the knee panel around the fuse box door. Look for the screws around the trim piece. It's a fairly simple process. It's a small, silver, and looks like a little can. I hope this helps. Don't forget to rate my answer, thanks.

Posted on Feb 18, 2009

Anonymous

  • 3 Answers

SOURCE: water pump replacement procedure 2005 2500 dodge with cummins diesel

take off old water pump. clean up area on the motor real good.do this by using a scrapper and cleaning slolvent. when thats all done put hi temp silicon on the block water pump and the put gasket on silicon. let dry for like five minutes. put in on torque bolts to specs.

Posted on Mar 22, 2009

ghost4548

Paul McGrath

  • 776 Answers

SOURCE: fcm location

The FCM is somewhere in the passenger compartment (in dash) location. The best solution is to take the vehicle into an authorized service dealership and have them diagnose this issue.

Posted on May 26, 2009

Robert Debison

  • 412 Answers

SOURCE: FCM

2006 MODEL YEAR TRUCKS INTEGRATED THE FRONT CONTROL MODULE(FCM) IN THE FUSEBLOCK..IT IS CALLED THE TIPM..TOTALLY INTEGRATED POWER MODULE..IF YOU'RE HAVING SOME ELECTRICAL CONCERNS,CHECK CONNECTORS ON BOTTOM OF THIS MODULE FOR CORROSION

Posted on Jul 05, 2009

Dsl Apprenti

  • 37 Answers

SOURCE: number one injector bank on 2006 dodge cummins

you'll notice on your valve cover gasket there is two connectors.. the one up front is your 1-3 the one in the rear is your 4-6... you can remove your valve cover and check the connections from the injector connectors to the
connectors on the valve cover.. check for an open.. however you could also have a fault internally in 1 of your injectors in that bank as well.. hope this info helped..

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought. 5.9 cummins Can`t get it to start without pushing gas pedal slightly. Runs good after warms up. Still have to give it fuel to start.


Numerous Conditions May Cause Engine to Crank But Not ...

repairpal.com > Problems > Dodge > Ram 2500
2006 Dodge Ram Laramie 2500, 5.9i liter Cummins ... I know in the old days the dodges had a way about starting up an engine and that would be where.

White smoke, rough idle at startup - Dodge Cummins Diesel Forum

www.cumminsforum.com > ... > 3rd Gen. Powertrain
Jun 5, 2010 - 9 posts - ‎7 authors I have an 06 Dodge 5.9L that has a light white smoke and rough idle when first ... 2006Ram 2500 QCSB 4x4, 3" Carli coils w/ 1" Daystar spacer, ... Still ran good tho, dispite the exact conditions you describe on Cold Start up.

Oct 20, 2015 | 1995 Dodge Ram 3500

1 Answer

Valve clearence for 2005 5.9 l dodge ram cummins


Cummins CR late model 5.9 v Bore and Stroke
5.9 liters [360 C.I.D] Engines....................102 mm [4.02 in] X 120 mm [4.72 in]
Firing Order (six-cylinder engine)....................1-5-3-6-2-4
Valve Clearance:
Intake....................0.254 mm [0.010 in]
Exhaust....................0.508 mm [0.020 in]

Hope this helps

Aug 26, 2010 | Dodge Ram Pickup 2500 Cars & Trucks

2 Answers

2004 Dodge Ram 3500 5.9 l cummins. My ac


Most likely culprit is the blower control module/ resistor. It is the part that controls the blower motor speeds.

Dec 25, 2017 | 2004 Dodge Ram 2500

1 Answer

I need a diagram for 2006 Dodge 5.9L cummins diesel for a drive belt


look in the owners manual or there should be a sticker under the hood, i have tried to find a site for diagrams but have not found a user friendly one yet, last one i tried it took an hour to find the one i wanted

May 08, 2010 | 2006 Dodge Ram 2500

1 Answer

Is there a fuse for the ac on a 2006 dodge ran 2500 diesel


how to get the compressor to come on, to put freon in system on a 2006 5.9 cummins 2500 ram truck

Apr 03, 2010 | 2006 Dodge Ram 2500

2 Answers

AC wont blow cold air/ 1996 dodge grand caravan es


the control module is bad it has an intermittant fault replace this and it will work fine

Aug 17, 2009 | 1997 Dodge Caravan

2 Answers

2006 Ram 2500 Cummins inline 6 diesel -- fuel leak under hood


I'm no expert but I had a similar problem. On October 10th, 2009 I smelled the same thing. I own a 2005 Dodge Ram 2500 Cummins. It has about 150,000 miles. The next day I checked under the hood and found that the #4 injector tube was leaking and providing a fine mist of diesel fuel all over the engine compartment and firewall. The trouble seemed to be from the plastic clamp that is suppose to hold the tube in place. It was very loose and I feel that is the reason for the break/leak. The leak was right at the compression fitting on the tube where it passes through the nut that connects it to the injector. I called around to find the replacement parts and the dealer wanted about $75 for the tube and about $12 for the plastic clamp. I found the Cummins dealer wanted around $21 for the whole assembly and that included the plastic clamp assembly as well. Don't go to the dealer!!! I replaced the injector tube in about 20 minutes because it took about 10 to find my tool box. The repair was easy and everything is back to 100% fine and no leaks. I believe that if I had to replace injector tube # 5 or 6 it would have been a lot bigger deal because they are so far back and under the firewall. Difficult for someone without any more than standard wrenches. The only trouble I had was getting something of the proper height to stand on for good leverage. This one is a do it yourself and save project.
Eric Larson
Redlands, CA

Aug 02, 2009 | 2006 Dodge Ram 2500

1 Answer

Where is oil pressure sensor located on 2001 dodge 2500 cummins?


Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger

Jul 07, 2009 | 2006 Dodge Ram 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...