Question about 2002 Buick Rendezvous
1. Drain the cooling system until the coolant is below the level of the water pump. 2. Remove the drive belt guard. 3. Loosen the water pump pulley bolts. 4. Remove the drive belt. 5. Remove the water pump pulley bolts. 6. Remove the water pump pulley. 7. Remove the water pump bolts. 8. Remove the water pump. 9. Remove the water pump gasket. 10. Clean the water pump mating surfaces. Installation Procedure 1. Install the water pump gasket. 2. Install the water pump Notice: Refer to Fastener Notice in Service Precautions. 3. Install the water pump bolts. Tighten the bolts to 10 Nm (89 inch lbs.). 4. Install the water pump pulley. 5. Install the water pump pulley bolts. 6. Install the drive belt. Tighten the water pump pulley bolts to 25 Nm (18 inch lbs.). 7. Install the drive belt guard. 8. Fill the cooling system
Visit my Blog here
Posted on Jul 21, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 06, 2016 | 2003 Buick Rendezvous
Feb 01, 2014 | Buick Cars & Trucks
Nov 05, 2012 | 1996 Buick Skylark
Jul 10, 2011 | 2003 Buick Century
Sep 04, 2010 | Buick Rendezvous Cars & Trucks
Mar 28, 2010 | 1998 Buick LeSabre
Dec 22, 2009 | 2003 Buick Rendezvous
Nov 07, 2009 | 1997 Buick Skylark
Feb 26, 2009 | 2003 Buick Rendezvous
Dec 09, 2008 | 1998 Buick Century
2,709 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: