Question about 1999 Oldsmobile Intrigue

1 Answer

Where is crankshaft sensor on 3.5 L engine in 1999 olds intrigue ?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Underneath the motor you have to remove the starter

Posted on Aug 30, 2010


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Symptom of bad crankshaft sensor on 2000 yukon denali

A crank sensor will usually fail and set a trouble code in the computer.
Once the engine starts the ignition gets a signal from the cam sensor and uses the crank sensor as a reference point.
If the crank sensor fails it generally keeps the engine from starting.

Jan 17, 2013 | 1999 Oldsmobile Intrigue

1 Answer

99 oldsmobile crank sensor 3800 where is it

The sensor is on the front of the engine just to the side crankshaft harmonic balancer.It is very hard to get at and requires special tools to replace it properly.

Sep 21, 2011 | 1999 Oldsmobile Intrigue

1 Answer

Trying to replace the crankshaft position sensor on a 2001 olds intrigue and cannot locate it. Where is it?

Hello suewagner.
The crank sensor is mounted above the starter motor on the firewall side of the engine. The sensor picks up the signal direct off of the crankshaft through a machined hole in the engine block.
I have removed them without dropping the starter but learned that in most cases it is easier to drop the starter down to access it.
Here is a diagram for you.


There you are, hope this helps you.
Take care,

Apr 11, 2010 | 2001 Oldsmobile Intrigue

1 Answer


any codes would show if sensor bad or going bad a rod knock is internal lower engine problem(connecting rod) rod knock can b bearing -rod-pin -piston harmonic balancer is on crankshaft out side of block if bad usually breaks off or causes heavy vibration

Nov 04, 2009 | 1999 Oldsmobile Intrigue

2 Answers

Where is the crankshaft position sensor located on a 2000 intrigu

Should be located around 11:00 on front of engine at crank pully.

Oct 28, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Why does the engine just die in my 1999 Olds Intrigue?

You need to do some basic tests to eliminate or get closer to the issue. Possibilities: 1) Fuel delivery 2) Ignition signal lost temporarily 3) Engine air leak - causes rough slow idle/stalling. 4) Bad MASS air flow sensor. etc, etc.

Oct 21, 2009 | 2000 Oldsmobile Intrigue

1 Answer

1998 olds intrigue sometimes wont start

Have the crankshaft sensor replaced. This is a very common problem on this engine and it's a job best done at a shop because you need a special puller to get the crankshaft pulley off.

Apr 22, 2009 | 1998 Oldsmobile Intrigue

1 Answer

I need the location of a crankshaft postion sensor on 1999 olds intrique with 3.5 v-6

it's behind the harmonic balancer-or better known as the vibration damper---the big pulley at the bottom of the engine

Mar 16, 2009 | 1999 Oldsmobile Intrigue

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Jonah Oneal

Level 3 Expert

14092 Answers


Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides