Question about Chevrolet Camaro

2 Answers

Need the ignition wiring diagram for a 1994 camero from the ignition key to the engine computer

Posted by on

  • 1 more comment 
  • jrking911 Sep 28, 2010

    my email is

  • jrking911 Oct 02, 2010

    there are 4 large plugs on the cumputer they all have there own color witch one is for the ignition and for the fuel injectionby color

  • jrking911 Oct 04, 2010

    I need to talk to some one who has put a 94 or newer chevy LT1 in a older chevy.min is a 1956 bel air.I want to bypass everything I can and just run the engine main functions



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Your diagrams are ready, please provide an email address to send diagrams to, this site only allows 150k images.

Posted on Sep 28, 2010

  • Rene J Solis Sep 28, 2010

    Your wiring diagrams (for the whole electrical system), have been sent. to the email address you provided. If you need further assistance just post a comment/

  • Yolanda Amaro
    Yolanda Amaro Oct 31, 2018

    can you email me as well.


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 17,970 Answers

need the ignition wiring diagram - 4b35dc7.jpg

Fig. 1: 3.4L (VIN S) engine control wiring diagram (1 of 3)-1993-94 vehicles


Fig. 1: 3.4L (VIN S) engine control wiring diagram (2 of 3)-1993-94 vehicles


Fig. 1: 3.4L (VIN S) engine control wiring diagram (3 of 3)-1993-94 vehicles


Fig. 15: Chassis wiring diagram (1 of 3)-1993-95 vehicles


Fig. 16: Chassis wiring diagram (2 of 3)-1993-95 vehicles


Fig. 17: Chassis wiring diagram (3 of 3)-1993-95 vehicles

There also have 5.7L engine, confirm if this its your right infor, or if need other engine sizes info.

Posted on Sep 28, 2010


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 1994 GMC safari van (4.3L.) won't fire up.Does this engine have a crank sensor?

How long since a tune-up? Any applicable trouble codes? I looked at your wiring diagram for your engine, didn't see crank sensor.
Make sure battery has a full charge. Engine cranking do you have spark at the plugs? If not, check primary voltage to the ignition coil, pink wire goes hot with key on, use a test light.
Engine cranking do you have a fuel injector pulse?
The computer has to see rpm signal, that comes from pickup coil in distributor to ignition module then to computer. From dist to computer, purple wire with white tracer, carries dc pulse, engine cranking.
There might be other issues.

Apr 09, 2018 | GMC Cars & Trucks

1 Answer

On a 1994 Chevy suburban there's no power to anything that would be powered up when the key is on all items except the door locks work i.e. head lights, dome lights. And cigarette

Ignition switch possible or a main fusible link. go to free wiring diagrams .Enter your vehicle info . year , make , model an engine . then under system click on electrical distribution . subsystem -power distribution . Click on the search button ,then the blue link . Check out the wiring diagrams .You'll need to do some voltage testing to find if voltage is missing . This vehicle has eight fusible links ,one feeds the ignition switch . On the fire wall there should be a junction block where all these fusible links are connected to a main wire from the battery . You can try to see if one is burnt by pulling on them , you will feel the insulation stretch if burnt inside .

Jun 24, 2016 | 1994 Chevrolet Suburban

1 Answer

A diagram for a 1994 v6 Camaro spark plug wires

go google and type in --firing order v6 camero 1994 model

Jan 20, 2016 | Cars & Trucks

2 Answers

My 1999 tahoe got a 350 in it what could stop it from firing

bad crank position sensor
bad ignition module
bad spark plugs
bad wiring
weak battery
bad computer
the list goes on....

Do you have any check engine codes showing up? A proper diagnosis of the symptom will yield you a faster and less expensive repair.

Feb 02, 2015 | Cars & Trucks

1 Answer

I need an under-dash ignition wiring diagram for my 1994 Ford Ghia Telstar TX5. I hear its the same as the Mazda 626 or MX-6 of the same year, is that correct?

mazda and ford used the same base vehicle ,the differences were cosmetic and badge swapping. A workshop manual for either vehicle should help you in this problem

Dec 15, 2014 | Ford Cars & Trucks

1 Answer

Starter wiring diagrams


hope it helps I suspect that you have a starting problem usually there is 2 little wires Inside column steering connect to cyllinder key are cut
you can test it at the end of steering column 2 very little yellow wire ...put key in ignition cylinder and with ohm meter take resistor value if none wire is open circuit.

Jul 02, 2014 | 1994 Pontiac Firebird

1 Answer

Where can i have a spark plug's schema of the pontiac transport 1994 3.1L ?

If you're looking for the firing order diagram, this is it:

FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason, it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 3.1L Engine Firing Order: 1-2-3-4-5-6 Distributor Rotation: Clockwise 91092g13.gif
Fig. 2: 3.4L Engine Firing Order: 1-2-3-4-5-6 Distributorless Ignition 91092g14.gif
Fig. 3: 3.8L Engine Firing Order: 1-6-5-4-3-2 Distributorless Ignition 91092g18.gif
prev.gif next.gif

Oct 17, 2010 | 1994 Pontiac Trans Sport

1 Answer

I need a diagram for a 1994 camaro serpentine belt diagram 3.4 liter

There should be a diagram on a sticker under the hood lip of your camero (nice car by the way)

Oct 11, 2009 | 1994 Chevrolet Camaro

1 Answer

Ignition wiring

firingorder6a.gif firingorder6.gif 1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6 1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6
4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System

Nov 22, 2008 | 1995 Ford Ranger Supercab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

8,316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides