Question about 2004 Chevrolet Impala

1 Answer

Looking for head bolt troque spec for 3.4l impala sfi04

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Master
  • 1,751 Answers

Please don't forget to rate. Thank you:

Left side front cylinder head


looking for head bolt troque spec for 3.4l impala - 98e175a.gif
Cylinder head bolt torque sequence-3.4L engine

  • Cylinder head by aligning it with the dowel pins
  • New cylinder head bolts coated with a sealant (such as GM 1052080). Torque the bolts in the proper sequence (1-8) to 37 ft. lbs. (50 Nm). Using a torque angle meter turn the bolts 90 degrees in the proper sequence.
  • Left side exhaust manifold. Torque the bolts to 12 ft. lbs. (16 Nm).
  • Spark plugs. Torque the plugs 11 ft. lbs. (15 Nm).


  • Right side rear cylinder head:

    looking for head bolt troque spec for 3.4l impala - 71cd5b7.gifg src="/uploads/images/71cd5b7.gif" alt="71cd5b7.gif" class="h_mi" />
    Cylinder head bolt torque sequence-3.4L engine


  • New cylinder head gasket
  • Cylinder head on top of the gasket and make certain it is lined up properly with the dowel pins
  • New cylinder head bolts coated with a sealant (such as GM 1052080). Torque the bolts in the proper sequence (1-8) to 37 ft. lbs. (50 Nm). Using a torque angle meter turn the bolts 90 degrees in the proper sequence.
  • Right side exhaust manifold. Torque the bolts to 12 ft. lbs. (16 Nm).
  • Spark plugs. Torque the plugs 11 ft. lbs. (15 Nm).
  • Spark plug wires
  • Exhaust crossover pipe. Torque the fastener to 18 ft. lbs. (25 Nm).
  • Valve rocker arms and pushrods. Torque the fastener to 89 inch lbs. (10 Nm). Using a torque angle meter torque the fastener an additional 30 degrees.
  • Lower intake manifold. Torque the bolts to 115 inch lbs. (13 Nm).
  • Upper intake manifold. Torque the bolts to 18 ft. lbs. (25 Nm).
  • Posted on Nov 26, 2010

    Ad

    1 Suggested Answer

    6ya6ya

    6ya staff

    • 2 Answers

    SOURCE:

    Hi there,
    Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

    Here's a link to this great service

    Good luck!

    Posted on Jan 02, 2017

    Ad

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    The head torque specs on a 07 Chevy Impala 3.8


    It is important to remember that the cylinder head bolts used for these engines should be replaced any time the heads are re-installed. Failure to replace the bolts during head installation may reduce clamping force and head gasket service life.
    To install new head bolts on these engines, use a torque angle tool and:

    1. Thoroughly clean the threads in the block using a 7/16-14 tap.
    2. Install the head gasket with the arrow pointing to the front of the engine.
    3. Install the new cylinder head bolts dry.
    Notice: This bolt is designed to permanently stretch when tightened. The correct part number fastener must be used to replace this type of fastener. If the correct bolt is not used, the parts will not be tightened correctly and the engine may be damaged.
    Step 1: Tighten all bolts in sequence (see Figure 1) to 35-37 ft.lbs. (49-50 Nm).
    Step 2: Rotate each bolt 130 degrees

    head bolt sequence 3.8-bom5pd1ciyefzobabirzvf0g-2-0.png

    Oct 09, 2018 | Cars & Trucks

    3 Answers

    Torque specifications 2000 chevy impala wheel bearing


    The 2000 Chevroleticon1.png Impala is a sedan available in a pair of different versions, the base model and the LS. The Impala's torque specifications depend on the model, as the base and LS have different engines

    Read more : http://www.ehow.com/list_7412083_2000-impala-torque-specifications.html

    Oct 11, 2014 | 2000 Chevrolet Impala

    1 Answer

    What are the specs for a 62 impala torque n sequence for the head bolts?


    Give me some more information about this problem. May be i can help.

    Jul 14, 2011 | 1983 Chevrolet Impala

    1 Answer

    I need troque setting for cylinder head bolts for Madza MX3


    zjlimited_1139.jpg

    Fig. 1: Cylinder head bolt tightening sequence for all 4-cylinder engines


    1. Clean the cylinder head bolts and the threads in the block. Make sure the bolts turn freely in the block.

    2. Install a new head gasket on the engine block. Make sure the camshaft sprocket timing marks are still aligned, as set during the removal procedure. Install the cylinder head.

    3. Lubricate the bolt threads and seat surfaces with clean engine oil and install them. Torque the bolts in 2-3 steps to 56-60 ft. lbs. (75-81 Nm) in the proper sequence.

    Hope helps.

    Apr 29, 2011 | 1995 Mazda MX-3

    1 Answer

    Torch specs on cylinder head bolts


    You didnt mention which engine you have.
    3.4l = 44 ft/lbs plus 95 degrees.
    3.8 = 37 ft/lbs plus 120 degrees.
    Good luck

    Jan 09, 2011 | 2003 Chevrolet Impala

    2 Answers

    What are the cylinder head torque specs for a 1999 cadillac deville 4.6l


    I can help you with this but I have to ask one question. Have you already taken this apart and putting it back together? Did you rethread all the head bolt holes because they strip out when you tighten them and you will ruin the head gaskets. Let me know, I have don't this job quite a few times. I'll have to look up the actual torque specs. Also you are wanting the spec for the cylinder head bolts and not the cylinder head cover bolts right?

    Jun 12, 2010 | 1999 Cadillac DeVille

    1 Answer

    Cylinder head bolt torque chevrolet 3.4


    here is the troque spec for the cylinder heads.

    Cylinder Head Bolt
    • First Pass
    60 N·m
    44 lb ft
    • Final Pass
    95 degrees
    Cylinder Head Bolt
    • First Pass
    60 N·m
    44 lb ft
    • Final Pass
    95 degrees


    Cylinder Head Bolt
    • First Pass
    60 N·m
    44 lb ft
    • Final Pass
    95 degrees
    first pass 44 ftlbs
    second pass 95 degrees

    Jan 30, 2010 | 2003 Chevrolet Impala

    4 Answers

    Engine Bolt Torques- 2005 Chevy Impala/3400 Engine


    Head Bolts
    Step one 37 ft lbs then tignten 120 degrees more

    Rocker arms
    Step one 11 ft lbs then tighten 90 degresss more

    Upper intake
    89 inch lbs
    Lower intake
    132 inch lbs

    Jun 28, 2008 | 2005 Chevrolet Impala

    Not finding what you are looking for?
    2004 Chevrolet Impala Logo

    7,118 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    Marvin
    Marvin

    Level 3 Expert

    85206 Answers

    Jonah Oneal

    Level 3 Expert

    14092 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22484 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...