Question about 1994 Mitsubishi 3000GT

1 Answer

I need to know what the six wires that are on one plugin goes to by the color of each seperate wire for the drivers side electric seat. The Colors are: Black, Red & Black, Yellow & Green, Yellow & Blue, Red & Yellow, and Yellow.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 72 Answers

That connector is for the lumbar support in the seat. The wires are as follows:

Black - Ground, ends at left side under the dash.
Red and Black - Power to circuit fromk fusible link
Yellow and Green - Lumbar support, Push out
Red and Yellow - Lumbar support, Release in
Yellow and Blue - Side lumbar support, Spread out
Yellow, Should be Yellow and White- Side lumbar support, Close in

Hope this helps. Good Luck!

Posted on Apr 29, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My electric Windows and mirrors on the drivers side have stopped working on my 1.8turbo diesel mondeo also the central locking can you help please it's a 2010 model


Generally, I'll look at wiring diagrams for the proper wire colors, voltage and ground, for windows and or mirrors. Then check the wire harness on hinge side of driver door. Use a test light to check voltage and ground on the proper wire colors.
I don't believe my database will have wiring diagrams on this vehicle.

Apr 04, 2018 | Cars & Trucks

1 Answer

2005 Chevy Equinox Power Seat Switch Diagram!


You see the circuit breaker, supplies voltage to power seat switch, You see the wire color? On hinge side of driver door is probably a wiring harness, probably has a protective rubber boot covering. Pull the boot back far enough to see wire colors, use a testlight, have to penetrate the insulation to get at the wiring. If no voltage, either wire is broken or check for voltage at the circuit breaker. Black wire is ground, check that also.

You see the wire colors for seat motors, those are voltage and ground, depending on which way the motor is moving.
26212729-z33rarn03reygqwbcbj0ismt-4-0.jpg

26212729-z33rarn03reygqwbcbj0ismt-4-2.jpg

Jun 05, 2016 | 2005 Chevrolet Equinox

1 Answer

What are the fuel injector wire colors for a ford escape 2008 3.0L v6 4wheel drive?


Okay, you know each injector has a power wire, and a ground wire that goes into the pcm? All of the power wires to all six injectors is a green wire with a red stripe.

The ground wire colors are as follows:
inj 1: green wire/blue stripe.
Inj 2: gray wire/yellow stripe
Inj 3: violet wire/gray stripe
Inj 4: yellow wire/orange stripe
Inj 5: brown wire
Inj 6: green wire/white stripe

I should note that the wiring diagram I am looking at shows this diagram as from a 2008 model manufactured during 2nd quarter of the year 2008. If your injector wire colors are different than as listed above, there may have been production changes during the year. But the power wires to all six injectors would still have the same color wire. You could figure it out that way: in other words, looking at the injector harness, same wire color to all six is the power wire, all the odd colors are the ground wire for that injector. Hope this makes sense to you. Good luck.

Feb 03, 2015 | Ford Cars & Trucks

1 Answer

On the 1995 tahoe the female plugin is three wires two orange and one black when pluged into the power seat plugin that is 4 wires to the seat swich the sear switch turns into a 6 wire to the 3 motors the...


The switch reverses polarity depending on which way you want the seat to move. The dark blue with tan wire and the tan wire are the two wires that control the seat forward and rearward motor. With the switch in the forwar position there should be power on the tan wire and ground on the dark blue with tan wire. With the switch in the rearward position it will be just the opposite. There will be power on the dark blue with tan wire N the tan wire will now be ground. This is the same for the other two motors. The rear tilt wil be the dark blue and dark green wires. The front tilt will be the yellow and light blue wire.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Sep 08, 2013 | Cars & Trucks

1 Answer

All power locks, mirror and windows on passenger side stopped working on six cylinder 1996 grand jeep cherokee ltd. Is there a seperate fuse for the left side and where is it located?


No there is not a seperate fuse, but all power goes through driver door. First check to see if windows roll up and down using switches on drivers side. If they work then try the passenger side. If they don't work then the problem is with the passenger side switches. IF nothing works at on using either side switches then check the wiring through the kick panel and through the door, it could be that wire has been disconnected or cut. Good Luck.

Sep 07, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

All i want to know is what each wire does and for how i would install a radio.


when installing an aftermarket radio, you will have a wiring harness with the new radio. you will have to buy seperate an adapter harness for the vehicle you are putting the new radio in. these wires are usually labled. Just match the colors with colors. watch for solid colors and the wires with stripes on them. The solid ones are positive and the one with stripes are grounds. Its pretty self explanitory once you start doing it

Sep 14, 2010 | 1986 Ford F 250

1 Answer

Seats wires were cut, between the two front seats and also from the drivers seat to the panel. Need to know instructions to rewire


what u need to do is count how many wires are cut and will the wires reach eachother like do you need extra wiring to make up the differance all the wires are in colors like blue and red black and white 2 colors per wire some wires are a single colre ie blu blk rd yl match up youre wires to each other blu to blu red to red etc you will need **** connectors u can get at any automotive parts store or even walmart will have these u will need 1 **** connector per broken/cut wire all u do is strip the end of each wire about 3-8ths long slide one end into the **** connector and crimp that side then strip the other wire of the same color about3-8ths of an inch slide it in to the corresponding color **** connector

Oct 10, 2009 | 1995 Mercury Cougar

2 Answers

How to remove front bolts in Mustang GT electric seat when it is stuck all the way forward and covers bolt heads?


Once I had this problem and had to strip the wires under the seat and hook them up to another power source ((Your Battery)) Find the wire that moves the seat back and strip the wire, then hook it up to a seperate wire leading to the battery ((I used jumper cables)) If successful the seat will move back and you'll be able to remove your seat.

Aug 12, 2009 | Ford Mustang Cars & Trucks

2 Answers

What are the colors of the speaker wires in a dodge stratus 1997 coming from the wire harness of the car itself


The easiest way is to check the speakers themselves as manufacturers tend to change colors of speakers at a whim. Usualy though you will have 8 wires (4 front & 4 rear) paired in colours (white goes with white+black stripe(stripe is possative on speaker))etc.
Not knowing the cars electrics I can't be more specific.(I live in UK so don't know that much about U.S. cars)

Jun 27, 2009 | 1997 Dodge Stratus

Not finding what you are looking for?
1994 Mitsubishi 3000GT Logo

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...