Question about 2005 Jeep Grand Cherokee

1 Answer

How to reset perform service indicator? - 2005 Jeep Grand Cherokee

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 14 Answers

Disconnect the battery for at least 10 seconds, if that does not work, you may have to clear the codes via the scan tool. Also, don't dismiss the possibility that there may still be an issue with the vehicle that is storing a code.

Posted on May 04, 2011

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: resetting TPMS (Tire Pressure Monitoring System)

http://forum.chryslerminivan.net/printthread.php?t=113 visit yhis site it may help you

Posted on Oct 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instrument panel reflects service "B".


You can stop by a local Autozone, Advance, etc parts store and they'll reset your lights for you FREE . Dash resets don't clear possible faults.

Jan 03, 2011 | Mercedes-Benz E350 Cars & Trucks

1 Answer

How do you reset the wrench on a 2002 Mercury Cougar after an oil change?


From my owners manual:
Illuminates to indicate that routine service should be performed. Check your maintenance schedule to determine the routine service to be completed.
To reset the light, hold the SELECT and UNITS controls on the trip computer for five seconds. The light will be illuminated and then extinguish after approximately four seconds.

Nov 20, 2010 | 2002 Mercury Cougar

1 Answer

What does perform service service indicator light came on,what does that mean. 20.400 miles oil was changed @20,200 mikes


Perform service indicator warning is a heads up that another oil change is needed. Your vehicles computer calculates a duty cycle for service intervals; Driving distance, stop and go etc... Change the engine oil, and reset the alert, and you'll be fine.

Mar 06, 2010 | 2002 Jeep Grand Cherokee

2 Answers

Perform service jeep grand cherokee 2005 this message is appearing in the message center


Actually the newer cherokees are a little more complicated, it's not a reminder for an oil change. It is for an emssions service that should be performed according to the dealer. Here is the rest procedure

Turn ignition to on position, but do not start.
Depress brake pedal fully twice.
depress excellerator very slowly twice
Turn ignition off & that will reset the perform service indicator.
I am mechanic & we are getting frustrated because the dealers do not want to release this info to anyone, they want your money! Can you believe if you did not get them to perform the service they charge you a 1 hour shop rate??

Feb 10, 2010 | 2005 Jeep Grand Cherokee

1 Answer

How do you reset the perform service message after changing the oil in a 2006 Jeep Grand Cherokee?


http://www.jeep.com/en/owners/manuals/index.html?year=2006&nameplate=Grand%20Cherokee

That should allow you to download a copy of the owner's manual that will detail the reset procedure.

Basically, on Jeep products you

To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure:
1. Turn the ignition switch to the ON position (Do not
start the engine).
2. Fully depress the accelerator pedal slowly three
times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary repeat this procedure.

Oct 01, 2009 | 2006 Jeep Grand Cherokee

1 Answer

My Perform Service indicator came on. What does


make sure your gas cap is turned until it clicks un do the positive terminal on the battery for a minute then reconnect it this should reset the obc

Aug 24, 2009 | 2001 Jeep Grand Cherokee

2 Answers

Reset the service milage for 330ci 2003


Assuming this is a service level indicator and not Check Engine Light, instructions by bwwatson above are incorrect.

Please note, I don't recommend resetting this unless you perform BMW's service recommendations first.

After Mid-2000: You should not have the 20-pin DLC connector. You only need to hold the left odometer reset button in while turning the key to position 1 (Accessory). Keep holding the button for 5 or so seconds until any of the following shows in the display: OIL SERVICE or INSPECTION with RESET or RE. Release the button and press it again for another 5 or so seconds until RESET or RE flash. While the display flashes, press the button one more time briefly. If done correctly, END SIA should show up for a few seconds. All done.

Jun 25, 2009 | 2001 BMW 330

1 Answer

EVIC - PERFORM SERVICE MESSAGE


To reset the perform service message , is as follows , turn ignition switch to the ON position , depress and release MENU push button until SERVICE INTV . = is displayed , press and release STEP button to step through available options. the last selected distance option displayed becomes the service interval at which the PERFORM SERVICE message will be displayed . if a new distance interval is selected , RESET SERVICE DISTANCE ? with a yes or no option. when yes is selected the accumulated distance since the last previous PERFORM SERVICE message will be set to zero because the service interval has been changed . when NO is selected , the distance until the next PERFORM SERVICE message is reduced by the accumulated distance since the last previous message . EVIC exits programming mode and returns to its normal operation mode when the C/T button is depressed or when the end of the programmable feature menu list is reached , whichever comes first .

Thanks for asking .

Dec 30, 2008 | 2002 Jeep Grand Cherokee

2 Answers

Service message on 1995 Jeep Grand Cheerokee


It is the perform service indicator that is telling you it is time for service.
If you do not want to have car serviced right now, just just hit the reset button. You can also go thru the menu and set the mileage you want the Perform Service warning to come on.

Aug 27, 2008 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
2005 Jeep Grand Cherokee Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...