Top 20 2005 Big Dog Chopper Base Questions & Answers


Hi, Djtawni for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2004 Big Dog Softail wiring diagram Google Search
Needing wiring diagram for 2004 bdm chopper
2004 Big Dog BDM Motorcycle Service manual Tradebit $15
Parts Finder Big Dog Motorcycles Wichita KS
Big Dog 2006 Chopper Owner Manual

2005 Big Dog... | 167 views | 0 helpful votes


Hi, Roger for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Big Dog, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Change fork oil
VIDEO 4 BDM Big Dog Motorcyle Complete Fork Rebuild
Big Dog
Big Dog Motorcycle Parts Speed Dealer Customs
Engine Owners Manuals

2005 Big Dog... | 49 views | 0 helpful votes


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, stator, magneto, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Faulty neutral, side stand or clutch lever safety switch.
10. Faulty or corroded kill switch.
11. Accelerator pump damaged or not working.
12. Water or dirt in the fuel system, carburetor or filter.
13. Restricted, blocked or kinked fuel line.
14. Fuel tank empty.
15. The gas cap is not venting properly or fuel tank venting system blocked, loosen gas cap and go for a test ride.
16. A failed fuel pump, pressure regulator and or fuel injectors.
17. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
18. Needle and seat stuck closed in the float bowl.
19. Petcock clogged or damaged.
20. Lean angle switch is faulty or needs adjustment.
21. Catastrophic engine failure, perform a compression test.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
power is cutting out
Big Dog Motorcycles Recall For Potential Electrical Problem
2004 Big Dog BDM Motorcycle Service manual Download Manuals Technical $15
Big Dog Parts Accessories
Big Dog Motorcycles 2005 Bulldog Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Big Dog... | 290 views | 0 helpful votes


Hi, Carl for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Big Dog, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Torque specs
Rear axle nut
2004 Big Dog BDM Motorcycle Service manual Download Manuals Technical $10
Big Dog Parts Accessories
Big Dog Motorcycles 2005 Bulldog Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Big Dog... | 132 views | 0 helpful votes


Hi, Anonymous I am sorry you can't find the first and best tool you ever bought for your Big Dog but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
2005 Big Dog Chopper Base wiring schematics Google Search
BigDog wiring diagram Club Chopper Forums
Service Manual for 2007 Big Dog K9
Big Dog Parts Cruiser Motorcycle
Big Dog motorcycle manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Big Dog... | 203 views | 0 helpful votes


We cannot give you diamonds or coins
Please understand that you are talking on a public forum to regular people who offer advice, not to the company that made your singing monster.

Motorcycles | 163 views | 1 helpful votes


Thanks for the details, they do help. Is there a way you can disconnect different electrical circuits from the battery? Like Disconnect the lights, horn, or other components then start adding them back until you find the circuit or group of wires that causes the short. Because it seems you have a short somewhere, or something really putting a load on that 30 Amp fuse. So I'd break the circuits down to smaller pieces so that when you reconnect the lights, or starter, or whatever....that the fuse pops and you know the circuit causing the issue. You may have to open engine components like a magneto to isolate the circuits. But it shouldn't cost you anything except time.

Motorcycles | 158 views | 2 helpful votes


The stator on a motorcycle is purely a generator to keep the battery topped up and charging. The spark from the coils is a separate CDI system.

Motorcycles | 55 views | 0 helpful votes


Hi, David and the usual suspects are:
1. Contaminated or faulty speed sensor.
2. Faulty turn signal module.
3. Corroded, broken or loose connector pins/sockets in the wire harness between the speedometer and the ECM or TSSM and the sensor.
4. The speedometer unit has failed.
5. Speedometer instrument fuse has blown.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
https://www.hdforums.com/forum/softail-models/729158-speedo-issues-with-2001-fatboy.html
http://www.mediafire.com/file/65o6mbkdq5ty8ke/99_to_05_Harley_Softail_Service_Manual.pdf/file
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/service/document/6300?highlight=1998+sportster+owner
https://www.6ya.com/ To speak to me personally $6

Motorcycles | 46 views | 0 helpful votes


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking check for spark leakage in the dark
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Dirty air filter.
10. Intake air leak.
11. Water, dirt, or rust in the fuel system.
12. Carburetor contaminated, sticky float, plugged jets.
13. Carburetor has oil in the bowl due to excessive oil in pre-mix.
14. Carburetor vacuum diaphragm torn, cracked, not seated or installed improperly.
15. Multiple carburetors out of sync.
16. Fuel filter clogged.
17. Old or contaminated fuel.
18. Fuel tank vent system plugged or carb vent line closed off.
19. Gas cap diaphragm valve faulty.
20. Vacuum line from the intake manifold to fuel valve is broken, cracked, pinched, or missing.
21. Carburetor controls misadjusted.
22. Incorrect valve timing.
23. Valve springs floating, weak, or broken.
24. Damaged intake or exhaust valve.
25. Incompatible performance parts.
26. The control module may be in "LIMP" mode
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.gixxer.com/threads/my-first-gsxr-1100-misfire-issue.295693/
https://mechanics.stackexchange.com/questions/11497/one-cylinder-not-firing-gsx-r-750-w
http://ironbrothersmc.com/motors/Suzuki/Suzuki_GSX-R1100_'89-92_Service_manual.pdf
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Motorcycles | 40 views | 0 helpful votes


Hi, Janice you need to repost your question under the multimeter category, not Motorcycles. Thanks, Gregg

Motorcycles | 39 views | 0 helpful votes


Assuming you mean a Digitech GNX2 floor effects pedal, go to the Digitech site, search GNX2 and select support: Manuals

https://www.digitech.com/discontinued-products/GNX2-.html?dwvar_GNX2-_color=Grey-GLOBAL-Current&cgid=discontinued-products

The Re-Categorize link in FixYa is broken so I can't put it in a better category. If it is not a Digitech pedal, could you please Comment with the full make and model of what you are looking for.

Motorcycles | 37 views | 0 helpful votes


http://office.manualsonline.com/support/texas-instruments/calculator/

Motorcycles | 31 views | 0 helpful votes


Hi, Lillian you need to repost your question under the Skidoo category, not Motorcycles. Thanks, Gregg

Motorcycles | 32 views | 0 helpful votes


Hi, Sasa you need to repost your question under the Rotoprint or printer category, not Motorcycles. Thanks, Gregg

Motorcycles | 30 views | 0 helpful votes


Hi, Bob for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
http://users.on.net/~sandr/dxdtc.htm
https://www.motorcycle-manual.com/harley-davidson-fault-codes/
http://www.mediafire.com/file/r2e0a6dx6lskpnx/2009_Harley_V-Rod_Service_manual.pdf/file
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://ownersmanuals2.com/harley-davidson/night-rod-2008-owners-manual-66572
https://www.6ya.com/ To speak to me personally $6

Motorcycles | 36 views | 0 helpful votes

Not finding what you are looking for?
2005 Big Dog Chopper Base Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Big Dog Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5968 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Big Dog Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Chopper Base Big Dog

  • Chopper Base Big Dog

Most Popular Question

fork oil capacity 1997 big dog vintage

  • Motorcycles
Loading...