Question about 2002 Harley Davidson XL Sportster 883

1 Answer

I have a 02 sportster got an aftermarket mini speedometer it has 4 wires coming out org. To sensor power, blk. Ground, grn. Signal, red battery bike has the 12 pin plug for speed and tach does anyone know what wires are to what in this 12 pin plug ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Harley Davidson Master
  • 59,719 Answers

Hi Plowmanryana, for a free wiring diagram please visit the website below and good luck.
Harley Davidson Wiring Diagrams and Schematics

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Jun 09, 2015

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Trying to install a harley davidson tach on 2007

The pink wire goes to the pink eng rpm signal wire coming from the ecm. Go to the stealership and ask 'em to show you where it is.

Aloha

Posted on May 01, 2009

dj_relly999

dj_relly999

  • 4070 Answers

SOURCE: replace speedometer with tach speedometer combo

Hi! Looks like that the replacement part is the problem. The background color maybe faulty that's why it's not responding eventhough that you followed the directions properly. Please try to have the part replaced and see how it goes. Hope this helps and thank you for using FixYa!

Posted on Sep 16, 2010

jagjeffery

Jeffery Lewis

  • 329 Answers

SOURCE: Need help! I mounted at my

I assume that the tach is lighting up correctly so you know you have power and ground your signal wire should be green this goes straight to the ground side of the ignition coil you can trace the wire or run a new one directly to the tach.if the tach doesn't work with the signal wire hooked direct you have a bad new tach , it wouldn't be the first time i have had this be the case that's for sure .

Posted on May 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a wiring diagram for a range selector sensor plug for a 2004 chevy silverado 1500,4x4,4.8L with a 4KCD transmission


Connector Part Information • 15416722 BLK
• ASM Conn 12 F GT
Pin Wire Color Circuit No. Function
1 DK GRN 1433 Clutch Start Switch Signal
2-3 -- -- Not Used
4 YEL 772 Transmission Range Switch Signal B
5 BLK/WHT 771 Transmission Range Switch Signal A
6 GRY 773 Transmission Range Switch Signal C
7 BLK/WHT 451 Ground
8 WHT 776 Transmission Range Switch Signal P
9 LT GRN 275 Park Neutral Position Switch Signal
10 GRY 1524 Back-Up Lamp Supply Voltage
11 PNK 839 Ignition 1 Voltage
12 PPL 639 Ignition 1 Voltage

This all I could find, hope it is the correct one.

Apr 08, 2016 | Cars & Trucks

1 Answer

Need to wire up a factory radio plug for 2003 chevy tahoe z71 with bose premium system. need to know what wire gose in what pin in the plug. SOMEONE PLEASE HELP ME!!! PLEASE!!!


Connector Part Information
?€¢
12110088 (Except UQ7 w/o Y91)


?€¢
24-Way F Micro-Pack 100 Series (GRY) (Except UQ7 w/o Y91)


?€¢
15428074 (UQ7 w/o Y91)


?€¢
24-Way F Micro-Pack 100 Series (GRN) (UQ7 w/o Y91)

Pin
Wire Color
Circuit No.
Function
A1
ORN
1044
Radio Class 2 Serial Data
A2
--
--
Not Used
A3
PPL
493
Rear Seat Audio Enable Signal (UQ7 w/o Y91)
A4
RED
1486
FM Composite Signal (UQ7 w/ Y91)
A5-A7
--
--
Not Used
A8
TAN
201
Left Front Speaker Output (+) (UQ3/UQ5)
A8
TAN
511
Left Front Low Level Audio Signal (+) (UQ7)
A9
GRY
118
Left Front Speaker Output (-) (UQ3/UQ5)
A9
DK GRN
1947
Left Front Low Level Audio Signal (-) (UQ7)
A10
LT BLU
115
Right Rear Speaker Output (-) (UQ3/UQ5)
A10
BLK
1946
Right Rear Low Level Audio Signal (-) (UQ7)
A11
DK BLU
46
Right Rear Speaker Output (+) (UQ3/UQ5)
A11
DK BLU
546
Right Rear Low Level Audio Signal (+) (UQ7)
A12
BLK/WHT
1851
Ground
B1
ORN
340
Battery Positive Voltage
B2
--
--
Not Used
B3
PNK
314
Radio On Signal (UQ7 w/o Y91)
B3
DK GRN
145
Antenna Enable Signal (UQ7 w/ Y91)
B4
BRN/WHT
230
Instrument Panel Lamps Dimming Control (w/ Y91)
B5
BLK/WHT
1851
Ground (w/ Y91)
B6
GRY/BLK
2334
Radio Mute (UQ7 w/o Y91)
B7
--
--
Not Used
B8
BRN
199
Left Rear Speaker Output (+) (UQ3/UQ5)
B8
BRN
599
Left Rear Low Level Audio Signal (+) (UQ7)
B9
YEL
116
Left Rear Speaker Output (-) (UQ3/UQ5)
B9
DK GRN/
WHT
1547
Left Rear Low Level Audio Signal (-) (UQ7)
B10
DK GRN
200
Right Front Speaker Output (+) (UQ3/UQ5)
B10
ORN/BLK
1546
Right Front Low Level Audio Signal (-) (UQ7)
B11
LT GRN
117
Right Front Speaker Output (-) (UQ3/UQ5)
B11
LT GRN
512
Right Front Low Level Audio Signal (+) (UQ7)
B12
--
--
Not Used

Oct 20, 2015 | Cars & Trucks

1 Answer

Where can i get an 01 silhouette pcm pinout


PCM pinout diagrams
2001 silverado (Thanks Banker099)

Try this link for page below


wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 799x247 and weights 17KB.connectorc1pcm2001.gif

Powertrain Control Module (PCM) C1 (BLU)



Connector Part Information
• PCM Connector C1 Assembly 12191489

• TPA (BLU) 12176408

• Connector Cover 12191108

Pin
Wire Color
Circuit No.
Function

1
BLK/WHT
451
Ground

2
LT GRN
1867
12 Volt Reference

3
PNK/BLK
1746
Fuel Injector 3 Control

4
LT GRN/BLK
1745
Fuel Injector 2 Control

5-10
--
--
Not Used

11
LT BLU
1876
Knock Sensor 2 Signal

12
DK BLU/WHT
1869
CKP Sensor Signal

13
ORN/BLK
463
Requested Torque Signal

14
ORN/BLK
1061
UART Serial Data [Secondary]

15
DRK BLU/WHT
774
UART Serial Data [Tertiary]

16
--
--
Not Used

17
DK BLU
1225
Transmission Fluid Pressure Switch Signal B

18
RED
1226
Transmission Fluid Pressure Switch Signal C

19
PNK
439
Ignition 1 Voltage

20
ORN
440
Battery Positive Voltage

21
YEL
1868
Low Reference

22
--
--
Not Used

23
PPL
719
Low Reference

24
--
--
Not Used

25
TAN
1671
HO2S Low Signal [- Bank 2 Sensor 1]

25
TAN
413
HO2S Low Reference (Denso Sensors) HO2S Low Signal (Delphi Sensors)

26
TAN
1667
HO2S Low Signal [- Bank 2 Sensor 2]

26
TAN
413
HO2S Low Reference (Denso Sensors) HO2S Low Signal (Delphi Sensors)

27
--
--
Not Used

28
TAN/WHT
1669
HO2S Low Signal [- Bank 1 Sensor 2]

28
TAN
413
HO2S Low Reference (Denso Sensors) HO2S Low Signal (Delphi Sensors)

29
TAN/WHT
1653
HO2S Low Signal [- Bank 1 Sensor 1]

29
TAN
413
HO2S Low Reference (Denso Sensors) HO2S Low Signal (Delphi Sensors)

30
LT GRN
1478
Coolant Level Switch Signal

31
--
--
Not Used

32
BLK/WHT
771
Transmission Range Switch Signal A

33
PPL
420
TCC Brake Switch Signal

34
WHT
776
Transmission Range Switch Signal P

35
GRA
48
CPP Switch Signal

36
BLK
1744
Injector 1 Control

37
YEL/BLK
846
Injector 6 Control

38
PNK/WHT
1101
Damping Lift/Dive Signal

39
--
--
Not Used

40
BLK/WHT
451
Ground

41
BLK
407
Low Reference

41
GRA
720
Low Reference (w/o Delphi HO2S)

42
--
--
Not Used

43
RED/BLK
877
Fuel Injector 7 Control

44
LT BLU/BLK
844
Fuel Injector 4 Control

45
GRA
474
5 Volt Reference (FTP Sensor)

46
GRY
474
5 Volt Reference (TPS Sensor)

47
GRY
597
5 Volt Reference (MAP Sensor)

48
GRA
596
5 Volt Reference (EGR Sensor)

49 50
--
--
Not Used

51
DK BLU
496
KS [1] Signal

52
--
--
Not Used

53
BLK
470
Low Reference

54
BLK
452
Low Reference

55
BRN
1456
EGR Valve Position Signal

56
--
--
Not Used

57
ORN
440
Battery Positive Voltage

58
DK GRN
1049
ECM/PCM/VCM Class 2 Serial Data

59
YEL
710
Class 2 Serial Data

60
ORN/BLK
469
Low Reference

61
PNK/BLK
632
Low Reference

62
--
--
Not Used

63
GRA
720
Low Reference

63
TAN
413
HO2S Low Reference (Denso Sensors) HO2S Low Signal (Delphi Sensors)

64
--
--
Not Used

65
PPL
1670
HO2S High Signal [- Bank 2 Sensor 2]

66
PPL
1666
HO2S High Signal [- Bank 2 Sensor 1]

67
--
--
Not Used

68
PPL/WHT
1668
HO2S High Signal [- Bank 1 Sensor 2]

69
PPL/WHT
1665
HO2S High Signal [- Bank 1 Sensor 1]

70
BRN
1174
Oil Level Switch Signal

71
--
--
Not Used

72
YEL
772
Transmission Range Switch Signal B

73
BRN/WHT
633
CMP Sensor Signal

74
YEL
410
ECT Sensor Signal

75
PNK
1020
Off/Run/Crank Voltage

76
BLK/WHT
845
Fuel Injector 5 Control

77
DK BLU/WHT
878
Fuel Injector 8 Control

78
--
--
Not Used

79
WHT
687
3-2 Shift Solenoid Valve Control

80
ORN/BLK
510
Low Reference
wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 799x247 and weights 17KB.connectorc2pcm2001.gif

May 23, 2014 | 2001 Oldsmobile Silhouette

1 Answer

I have a mazda mvp 1993 v6 and i need what each coler and what eachean for a radio help me


If this is a new radio you are installing, these are the existing Mazda connections:

In joint box: BLU/BLK wire from 15A CIGAR fuse (accy/run power); BLU/RED wire from 15A ROOM fuse (always hot power).

LF speaker: RED and RED/BLK; RF speaker: RED/YEL and ORG/BLU (or RED/WHT); LR speaker: BRN and BRN/WHT, RR speaker: BRN/YEL and BRN/BLK; L door woofer: GRN/BLK and GRN/ORG; R door woofer: GRN (or GRN/WHT and GRN/RED

Sep 27, 2012 | Dual New Xr4115 Mechless Digital Media...

1 Answer

1992 dodge dynasty radio diagram


Assuming the radio connects to the RS amplifier, the harness is as follows:
From fuse 13: PNK or BLK -> PNK/LT BLU -> PNK or BLK -> PNK/LT BLU -> radio (!)
From fuse 20: RED/WHT -> radio
From fuse 10: VIO -> amp
From radio: ORG and BLK/YEL to interior lights
From radio to amp: DK BLU/RED, BRN/RED, DK BLU/ORG, BRN/ LT BLU, VIO, DK GRN or DK GRN/WHT, DK BLU/WHT, BRN/YEL
From radio to pwr ant: DK RED/GRN
From RS amp to:
R. door: LT BLU/VIO and LT BLU/DK GRN
R. front: ORG/BLK and ORG/RED
R. rear: TAN/BLK, TAN/RED, TAN/DK GRN, and TAN/VIO
L. rear: WHT/DK GRN, WHT/VIO, WHT/BLK, WHT/RED
L. front: YEL/BLK and YEL/RED
L. door: LT GRN/DK GRN and LT GRN/VIO

Mar 17, 2017 | 1992 Dodge Dynasty

3 Answers

My 2000 gmc jimmy 4x4 stoped working. It wont go into 4 hi. the vacume pump under the battery is good. can hear and feel the motor switch from 4 low to 2 hi. any ideas? Is there a code reader for this...


Hi, it sounds like your front diff engages but your transfer case is not. raise one of your front tires off the ground and see if it will lock up when you go to 4hi. If it does then the problem is your encoder motor that hangs down under your transfer case.

Aug 21, 2010 | 2000 GMC Jimmy

1 Answer

1993 ford thunderbird stereo installation guide/ wiring guide


bat.-lt.gr/ppl; grnd-blk; ign-yel/blk; lights-lt.blu/red & org/blk; grnd-blk/org; L.F.-org/lt.grn & lt.blu/wht; L.R.-pnk/lt.grn & tan/ylw; R.F.-wht/lt.grn & dk.grn/org; R.R.-pnk/lt.blu & brn/pnk

Nov 07, 2009 | 1993 Ford Thunderbird

1 Answer

Need to wire a new car stereo for ford 1991 fairlane i am having trouble working the colour coding of the old wires as alot of the new colours are different


colors are:

gry/grn + gry/blk -> rt frt
org/grn + org/blk -> lt frt
blu/red + blu/blk -> rt r
pnk/grn + pnk/blk -> lt r

+12V - grn/yel
+12v switch -> blu/wht
ant: ( if you have it) -> red/blu
lights: brn
earth- > blk

Sep 16, 2009 | Pioneer DEH-30MP CD Player

2 Answers

Wiring Diagram


Blk - Ground
Org - Light Dimmer
Red - Ignition Switch
Ylw - 12v+ (Battery)
Ylw/Blk - Cell Phone Mute
Wht & Wht/Blk - Left Front Speaker (LF)
Gry & Gry/Blk - Right Front Speaker (RF)
Grn & Grn/Blk - Left Rear Speaker (LR)
Purp & Purp/Blk - Right Rear Speaker (RR)

Jul 29, 2008 | Pioneer DEH-P3600 CD Player

3 Answers

Wiring diagram for radio


if your truck still has the wire connectors for the radio harness then your best bet would be to purchase the plug in adapters from wal-mart or local stereo shop,it should only cost about 10-15 bucks and would clarify your connectivity issues.or get a test light and at least determine power & ground wires then run new speaker wire

Jun 28, 2008 | 1988 Ford Ranger

Not finding what you are looking for?
2002 Harley Davidson XL Sportster 883 Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5968 Answers

Mike

Level 3 Expert

4363 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...