Question about 1983 Yamaha XJ 650
Bike will start ok, then when I go to take off it will kind of sputter and then stall and then I do it again and the same thing happens. If I slowly let the clutch out or rev it nothing seems to help. My first bike and I don't know what to do.
I had a simular problem on one of my other bikes. Bike will start fine, idle, rev up, but when you try to go it would spit and sputter. I found that the carbs were gummed up and not firing on all cylinder. easy way to check is start it up let it idle for a few seconds then get a spray bottle with water and spray the exhaust. if the cylinder is firing the water will sizzle if it is not it will just bead off. DO NOT do this when it is HOT this can cause many other problem only just after start up with a few minutes of running. Then you would know if you have some dead cylinders and then you can start back tracking from that because it could be carbs, plugs, coils, loose wire, but it will give you a start.
Posted on Jun 11, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 04, 2014 | 1983 Yamaha XJ 650
Jan 20, 2014 | Yamaha YZ 250 F Motorcycles
Sep 28, 2013 | 1990 Yamaha FZR 1000
Sep 25, 2013 | 1983 Yamaha XJ 650
Jan 06, 2018 | Yamaha 1983 Xj900 Xj700 Xj650 Xj750 Stator...
Nov 02, 2012 | 2002 Yamaha DT 125 R
Oct 10, 2012 | 1983 Yamaha XJ 650
Jun 06, 2011 | 2005 Yamaha V Star 1100 Classic
Oct 18, 2009 | 1994 Yamaha XV 535 Virago DX
Jan 03, 2020 | Motorcycles
476 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: