Question about Zongshen Motorcycles
I have a zongshen 200cc quad that is not producing any spark, can you please help me identify the problem? It may have something to do with the wiring as when I got the bike someone has tampered with all the wiring. I have so far been able to get it to tune over and this is where my dilemmas start. I have added this photo so you have som understanding of what I mean . A complete wiring diagram would be helpful if you have one handy. Regards Hudson
Go online for the nearest dealer and see what he's got. These are cheap imports with very little support so you could have trouble.
Posted on Mar 30, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: hi i have a dinli
I assume that is a 100cc, 2 stroke ATV? If the starter motor is spinning, and you just don't have any spark. First, replace the spark plug. If that doesn't fix it, then you may have one of the following problems: Bad CDI, Kill Switch or Rip Cord Shut off switch, Frayed wire shorting out, cracked/damaged spark plug cap, bad coil or coil wire, bad stator. My bet is on the kill switch and/or Lanyard/Rip Cord shut off switch or the CDI. You can bypass your shutoff switches to see if they are the problem by either disconnecting the wires or connecting them together(depending on the type of system you have). CDI's routinely fail on small engines and generally cost about $20-$70, depending on the style. www.solanocycle.com
Posted on Jan 03, 2011
SOURCE: wiring diagram for bike
You can go to your local dealer and they usally will copy it out of ther service manuel for you.When you say passing lights do you mean highway lights?
Posted on Mar 29, 2009
Check the kill switches including the side stand switch, with an Ohmmeter. Good battery? Good fuses" All wires clean and with a solid connection? Check the loom. Any abraded wires? Check the operation of the ignition switch with a volt ohmmeter. Is the bike in neutral and the neutral light is lit up? Get new stock spark plugs.
If still no spark, get CDI system and coils checked at the dealers shop.
Please rate this solution. Thanks burbee904!
Posted on Apr 05, 2009
Tips for a great answer:
Aug 13, 2018 | Zongshen Motorcycles
May 03, 2018 | Zongshen Motorcycles
Mar 09, 2018 | Zongshen Motorcycles
Nov 07, 2017 | Zongshen Motorcycles
Sep 27, 2015 | Zongshen Motorcycles
Oct 08, 2014 | Motorcycles
Aug 23, 2014 | 2007 Zongshen SC125
Jul 12, 2010 | RTO 200cc Full Size Four Wheeler ATV
Apr 17, 2010 | RTO 200cc Full Size Four Wheeler ATV
636 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: