Question about 1999 Suzuki GSF 1200 Bandit S

2 Answers

I have a 1998 suzuki bandit 1200 s

She is spitting and sputting i have to plug change and the oil and carb clean and a new cluttch you can help me solve the problem thank you

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 330 Answers

When you replace the air filter clean the inside of carbs change the plugs and test your plugwires for normal resistance,the spit and sputter should be gone. If not check the coil for any visible damage.(test it) Might change the oil after new clutch is installed, to complete the service. Ur Welcome!

Posted on Apr 26, 2010

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 653 Answers

What about your carb, fuel filter and air filter?

Posted on Apr 26, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bandit 1200


check ht leads have good connections, to plugs and coils, also 2 wires to coil which goes to number 1 cyl. hope it heps

Oct 30, 2013 | Motorcycles

1 Answer

2005 Suzuki GSF 1200 Bandit S pops and spits at low idle


Hi, Anonymous if your carburetor or exhaust is:
COUGHING is usually caused by an air leak in the intake system and will generally have the same telltale signs, a wet or damp build up of oil/gas seepage at the intake manifold to cylinder head or carburetor to intake manifold connection and in rare instances a worn throttle plate shaft and or seals.
POPPING on deceleration is usually caused by a lean fuel condition or an air leak in the exhaust system and is generally located where black carbon soot is seen as a flashing build up from any joint connection. This condition can easily be remedied by removing and cleaning both joint pieces and reassembling with high temp silicone and torquing the exhaust clamp to the proper spec.
SPITTING is usually caused by a faulty accelerator pump and or nozzle, or the float bowl needle and seat leaking and overflowing through the main jet mixing well nozzle, or the air-fuel mixture screw is adjusted too lean.
BACKFIRING is usually caused by a sticky/tight intake valve or a timing issue, 180 degrees out or cam chain off 1or 2 teeth.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to tell if bike is running lean or rich Bandit 1200
CustomFighters com Streetfighter Motorcycle Forum Bandit Running Rough
Suzuki 2005 GSF1200 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Apr 15, 2013 | 2005 Suzuki GSF 1200 Bandit S

1 Answer

1998 Suzuki GSF 1200 Bandit S fork oil capacity


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Parts Specifications SUZUKI GSF 1200 BANDIT Louis Motorcycle Leisure
http://forums.banditalley.net/suzuki-bandit-250-400-faq/fork-oil
Suzuki GSF1200S 2001 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Jul 16, 2012 | 1998 Suzuki GSF 1200 Bandit S

1 Answer

Bandit 1200 oil in crankcase


No i would not expect it to, if anything blocking the vent hose to the gas tank would cause a vacuum and stoping fuel from flowing as easy , most likely a faulty fuel pump diaphram or incorrect float height.

Feb 22, 2012 | 2001 Suzuki GSF 1200 Bandit S

1 Answer

Ive bought a bike (1998 suzuki bandit thats been standing for a few years starts great but needs a good service whats the best way to go about this) im thinking of emptying it of all fluids (petrol and oil...


run some seafoam through the tank to clean up a little of the crud thats bound to be in the lines and carbs, check all the fuel and brake lines, flush the brake fluid both front and rear, change the oil filter, air filter, and spark plugs. get a shop manual and go from there.

Sep 05, 2010 | 1998 Suzuki GSF 600 N Bandit

1 Answer

1997 suzuki 1200 bandit runs rough spits out of number 2 carb on idle


its spitting fuel or coolant? - not sure but this has happened with a leaking manifold, I know it sounds impossible but I heard of it... just check the manifold anyway* (go figure)
if its fuel being spat out I''d say pitted/worn/loose/misaligned/bent intake valve(s) on no2. any pinking?
if its coolant> head gasket*

Jan 16, 2010 | 1997 Suzuki GSF 1200 Bandit S

4 Answers

Best oil to put in a bandit 1200 1998


For the Bandit 1200 use only regular motorcycle oil. Stay away from synthetics for this particular engine. The Bandit has a weak clutch and using synthetics will cause slippage and premature wear. I recommend either Suzuki's oil 10-w40 or Yamalube 10-w40. I have over 30,000 miles on my Bandit with no problems at all. I hope this helps.

Sep 18, 2009 | 1998 Suzuki GSF 1200 Bandit N

1 Answer

92 suzuki bandit 400 gs-f, ran but it didn't idle after carb clea


hi buddy on my bike i had this problem when you rev it it will rev down gradually so it changed the jets and ir worked so try this buddy then get back to me give me a good rating

Sep 15, 2009 | 1992 Suzuki GSF 400 Bandit

1 Answer

Will a sump off a 600 bandit fit a 1200


The pumps have different part numbers > The 600 is #16400-06B01 and the 1200 is 16400-06B20
Chances are, even if the pump "fits", the 600 will not have the volume of oil flow needed for the 1200 motor. Starve the 1200 of oil and plan on a new engine in the near future. Sorry.

A “very helpful” rating for this answer? Thanks!

Jun 15, 2009 | 1998 Suzuki GSF 1200 Bandit N

2 Answers

Oil plug


Bottom of oil pan...underneath the bike. Approach the undercarriage from the leftside of the bike, so you will not have to deal with the exhaust pipes. Remember to change your oil filter with every other oil change.

Nov 10, 2008 | 2004 Suzuki GSF 1200 Bandit N

Not finding what you are looking for?
1999 Suzuki GSF 1200 Bandit S Logo

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...