Ultra Motorcycles - Page 3 - Recent Questions, Troubleshooting & Support


Hi Jim, for this situation I would call my local dealer or reputable shop's service department and inquire about any possible quick fix. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if possible, and give you a written estimate of repairs and answer any specific questions you may have about your issue. Good luck and have a nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Ultra... | Answered on Sep 29, 2015


Hi Gregg, I use to work for Ultra when they first started making bikes. Give them a call and maybe they can help. Gregg
Ultra Motorcycle Company

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Ultra... | Answered on Sep 28, 2015


The plug wires you are using may not be shielded. Buy shielded plug wires.

Ultra... | Answered on Jun 16, 2015


67348-14A is the part number (pn) for the tacho
67349-04 is the speedometer
34309-06 may well be a fault code but not certain.

Ultra... | Answered on Apr 10, 2015


P1353 is front cylinder no combustion. pn refers to part numbers, 34309-06 ET sensor voltage open/high. The 67348-04a I'm not sure.

Ultra... | Answered on Apr 02, 2015


J & P Cycles should have them

2011 Ultra... | Answered on Feb 26, 2015


it blew the fuse for the fuel pump when it fell over and there is a 30 or 40 amp fuse down by the belt that blows and kills everything and that is probably is what happened

Ultra... | Answered on Feb 26, 2015


It's 4 quart capacity DRY. Most of the time you're only going to get about 3.5 quarts back in because you never really get all the old oil out unless you crank the motor over while trying to drain it....I DO NOT SUGGEST DOING THIS.

Ultra... | Answered on Dec 24, 2014


lubricate your clutch cable liberally

2010 Ultra... | Answered on Dec 03, 2013


We cannot give you diamonds or coins
Please understand that you are talking on a public forum to regular people who offer advice, not to the company that made your singing monster.

Motorcycles | Answered 11 hours ago


Hi, Bob for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
http://users.on.net/~sandr/dxdtc.htm
https://www.motorcycle-manual.com/harley-davidson-fault-codes/
http://www.mediafire.com/file/r2e0a6dx6lskpnx/2009_Harley_V-Rod_Service_manual.pdf/file
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://ownersmanuals2.com/harley-davidson/night-rod-2008-owners-manual-66572
https://www.6ya.com/ To speak to me personally $6

Motorcycles | Answered 20 hours ago


Hi, Adrian you need to repost your question under the Chana Star 1300 category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 20 hours ago


Hi, Anonymous you need to repost your question under the Chrysler PT Cruiser category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 20 hours ago


Hi, Lillian you need to repost your question under the Skidoo category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 20 hours ago


Hi, Janice you need to repost your question under the multimeter category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 20 hours ago


Hi, David and the usual suspects are:
1. Contaminated or faulty speed sensor.
2. Faulty turn signal module.
3. Corroded, broken or loose connector pins/sockets in the wire harness between the speedometer and the ECM or TSSM and the sensor.
4. The speedometer unit has failed.
5. Speedometer instrument fuse has blown.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
https://www.hdforums.com/forum/softail-models/729158-speedo-issues-with-2001-fatboy.html
http://www.mediafire.com/file/65o6mbkdq5ty8ke/99_to_05_Harley_Softail_Service_Manual.pdf/file
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/service/document/6300?highlight=1998+sportster+owner
https://www.6ya.com/ To speak to me personally $6

Motorcycles | Answered 21 hours ago


Hi, Sasa you need to repost your question under the Rotoprint or printer category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 22 hours ago

Not finding what you are looking for?
Ultra Logo

118 questions posted

Ask a Question

Usually answered in minutes!

Top Ultra Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Brad Brown

Level 3 Expert

18114 Answers

Are you an Ultra Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...