Yamaha Motorcycles - Recent Questions, Troubleshooting & Support


Hi, Damien for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNSmCRrFu-baLunomlKkr4weDFqStA:1580158794383&q=Wiring+diagram+1993+Yamaha+FZR+1000&tbm=isch&source=univ&sa=X&ved=2ahUKEwjgzIKd1qTnAhUh0FkKHZuhAXwQsAR6BAgKEAE&biw=1440&bih=757
https://www.classiccycles.org/1852/597985.html
https://www.manualslib.com/manual/1053639/Yamaha-1987-Fzr1000.html
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha/

Yamaha... | Answered 10 hours ago


Hi, Dale I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH---WHINE
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Cam Chains---CLICK
5. Clutches---CHATTER---GRIND
6. Cylinders---PING
7. Fairing Panels---WHISTLE
8. Fenders---SCRAPE
9. Fronk Forks---Plunk
10. Fuel pumps---WHIRR
11. Gears---WHINE
12. Head Gasket---HISS
13. Hydraulic Lifters---TAP
14. Instrument Clusters---BUZZING
15. Kick Starter---GRINDS
16. Pistons---SLAP
17. Power Valves---CLINK---RATTLE
18. Radiators---GURGLE
19. Rear Chains---RATTLE
20. Rear Shocks---SQUEAK
21. Relays---CLICK---BUZZ
22. Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
23. Shaft Drives---WHIRR
24. Shifting Trans---CLUNK
25. Solid Lifters---TICK
26. Speedometers---bzzz
27. Starters---CLICK
28. Starter Clutch---GRIND---WHIRR
29. Warning Lights---BEEP
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.roadstarraider.com/index.php?topic=37769.15
https://www.mybikeforums.com/forums/showthread.php?t=4318
http://www.mediafire.com/file/ekm1dodyyin/08_Yamaha_Raider_SVC_Manual.pdf/file
https://www.partsfish.com/page/oem-parts-for-yamaha
https://usermanual.wiki/Yamaha/2011RaiderSOwnersManual.1156735012/help

Yamaha... | Answered 2 days ago


Hi, Austin before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries. The following is a list of usual suspects that will cause your bike not to turn over.
1. Ignition Switch is in the "OFF" position.
2. Ignition Switch is faulty.
3. Engine Run Switch in the "OFF" position.
4. Engine Run Switch is "FAULTY" or corroded.
5. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
6. Bank angle sensor needs a reset or is faulty.
7. FOB battery low or dead.
8. Faulty ignition switch.
9. Faulty starter button.
10. Faulty kickstand, clutch, neutral safety switch.
11. Security alarm needs a reset.
12. Starter relay, solenoid, starter motor or circuit wiring faulty.
13. Starter armature or field coils have failed.
14. Main fuse or circuit breaker may be blown or faulty.
15. Faulty ignition relay.
16. The electric starter is working but starter clutch has failed.
17. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.roadstarclinic.com/forum/technical-forum/electrical-electronics/4240-electrical-problems-bike-won%E2%80%99t-start
https://www.youtube.com/watch?v=FIKyM2PAwSw
http://www.werder.ee/Manual/XV1600.pdf
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/660125/Yamaha-Road-Star-Xv16a.html

Yamaha... | Answered 3 days ago


Hi, Dave you need to repost your question under the Snowmobile category, not Motorcycles. Thanks, Gregg

Yamaha... | Answered 3 days ago


Maybe..chec utube or buya clymer manual. There are cycle salvageyards online. Seek an oldsch bikeshop intown..they know rite off from xperience

Yamaha... | Answered on Jan 22, 2020


Hi, Grant for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How to FIX For Scooter Speedometer and odometer Stopped Not Working
Speedometer trouble on scooter
https://scootergrisen.dk/scooterhjemmeside/download/yamaha_neos_2t_servicemanual_2.pdf
OEM parts for Yamaha
Yamaha NEO YN50 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



2006 Yamaha Neos | Answered on Jan 19, 2020


SOUNDS LIKE IT COULD BE THE SAFETY SWITCH FOR THE KICK STAND ,IF THE SWITCH HAS BEEN DAMAGED IT WILL START UP FINE AND WHEN PUT IN TO GEAR AND CLUTCH IS RELEASED IT WILL DIE.(This is a safety feature)

If that don't fix,Please post back

Please rate this fixya solution

2000 Yamaha DT... | Answered on Jan 17, 2020


Hi, Fredpitzman you need to repost your question under the Generator category, not Motorcycles. Thanks, Gregg

Yamaha... | Answered on Jan 17, 2020


Looks like your only solution is a new speed sensor, unless you have damaged the connecting wire.

Yamaha... | Answered on Jan 16, 2020


Hi, Anonymous and the usual suspects are:
1. Insufficient oil level or no oil in engine or tank.
2. The air in the oil system needs to be bled.
3. Blockage in the oil tank or line.
4. Oil pump failure.
5. Faulty oil pressure sending unit.
6. Grounded oil pressure light circuit.
7. Oil maintenance light needs to be reset.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://fzronline.com/forum/viewtopic.php?t=1441
https://www.totalmotorcycle.com/BBS/viewtopic.php?t=48079
https://www.scribd.com/doc/75458001/1-Yamaha-fzr1000-89-Service-Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha/

1993 Yamaha FZR... | Answered on Jan 16, 2020


Hi, Caleb_dekrak for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.manualslib.com/manual/659381/Yamaha-Virago-Xv250s.html?page=45
https://www.youtube.com/watch?v=F_csGU2pXSU
https://virago250street.files.wordpress.com/2013/10/yamaha_xv250_service_manual-lit-11616-xv-25-1994-291-pgs.pdf
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/659381/Yamaha-Virago-Xv250s.html

2005 Yamaha Xv... | Answered on Jan 16, 2020


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/660069-2004-yz-250-fork-oil-level/
https://www.youtube.com/watch?v=_k_JvZ4Idfc
https://www.manualslib.com/manual/581340/Yamaha-Yz250-N-Lc.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://ownersmanuals2.com/yamaha/yz250f-2004-owners-manual-68565

2004 Yamaha YZ... | Answered on Jan 16, 2020


Hi, Www_micha125 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Sukida, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNTTZDQOYaH77f-RYQ5IjgYKUOPxKg:1579134238747&q=Wiring+diagram+1985+Yamaha+XJ+700+Maxim&tbm=isch&source=univ&sa=X&ved=2ahUKEwiqm-m67YbnAhXOxFkKHds8DeUQsAR6BAgKEAE&biw=1440&bih=757
http://www.classiccycles.org/1852/597985.html
https://www.xjcd.org/book/export/html/1000
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha/

1985 Yamaha XJ... | Answered on Jan 16, 2020


Hi, Jerry you need to repost your question under the ATV category, not Motorcycles. Thanks, Gregg

Yamaha... | Answered on Jan 15, 2020


Hi, Tito not sure what return line you are referring too if your bike has been sitting idle for months or years and you did not do any pre-storage maintenance I feel your pain it will probably have a dead battery and not want to start or if it starts it will not idle unless the choke is full on and run poorly then stall, here are the following steps necessary to complete in order to get your bike back to an acceptable running condition and in the future pour in a bottle of fuel stabilizer and injector cleaner for you FI folks at least 2 times a year and before storage.
1. If your battery was 2-3 years old when you last had the bike running you should replace it.
2. If you believe your battery might still be serviceable remove it from the bike and put it on a 1 or 2 amp trickle charger for 24 hours. If it is the old lead acid type with visible cells and acid levels fill each cell to the top line with distilled water and replace the caps, run the vent tube into a plastic or styrofoam cup, any cells that are cloudy/milky replace the battery.
3. After charging the battery remove the leads and let it sit for a couple of hours then check the battery voltage with a voltmeter, you should have 12.5 volts or more, any readings in the 11 volt range you need to do a proper "LOAD" test on the battery and replace as necessary, you may have 12.5 volts or better but little or zero amps, any readings in the 10 volt range you have a dead cell and the battery needs to be replaced.
4. Drain and flush fuel tank if it rusty there is a cheap and easy fix. https://www.youtube.com/watch?v=fUYr_7SwGms
5. Remove and inspect your air cleaner paper elements that are not oil soaked can be cleaned with a soft brush and low pressure compressed air, oil-soaked elements must be replaced. Gause mesh and foam elements can be cleaned by soaking them in a container big enough to completely cover them with a solution of 1 gallon of water and 1 oz. of Dawn dishwashing liquid for small and medium size elements, for monster size double the formula and let soak for at least one hour then rinse with warm water shake off excess and let air dry, "WARNING" do not use compressed air as this will embed micro-sized dirt and road grime and destroy the mesh pattern and stretch foam elements out of shape just squeeze it like a sponge and let air dry, use a fan if you're in a hurry. When completely dry spray a very fine mist of air filter oil evenly around the whole element.
6. Remove the carburetors, disassemble and decontaminate with a "CARB DIP" or if you have EFI remove injectors and clean with carb spray and compressed air
7. Check intake manifold and seals for leaks and cracks.
8. Remove fuel valve and filter disassemble and clean as necessary, remove, clean, and inspect fuel and vacuum lines and replace as necessary.
9. Replace spark plugs with new ones and check for spark.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.r6-forum.com/threads/2006-r6-wont-idle-dies-without-throttle.413722/
https://www.reddit.com/r/motorcycles/comments/3m27ka/2007_yamaha_r6_wont_idle_more_info_inside/
https://www.manualslib.com/manual/656701/Yamaha-Yzf-R6-99.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/996565/Yamaha-Yzf-R6.html

Yamaha... | Answered on Jan 15, 2020


Hi, Malcolm you need to repost your question under the Guitar category, not Motorcycles. Thanks, Gregg

Yamaha... | Answered on Jan 14, 2020


Try wemoto.com or rexs-speedshop.com

Yamaha... | Answered on Jan 14, 2020


Hi, Raymond you need to repost your question under the Snowmobile category, not Motorcycles. Thanks, Gregg

Yamaha... | Answered on Jan 13, 2020

Not finding what you are looking for?
Yamaha Logo

30,311 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Paul Ellermets

Level 1 Expert

6 Answers

Neil Lancaster
Neil Lancaster

Level 1 Expert

14 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...