Windsor SR12 Sensor Bagged Upright Vacuum "burning smell" Questions

Ad

Question about Kenmore Vacuums

1 Answer

burning smell Kenmore 50558 what would a burning smell mean? If the burning smell is an electrical smell it could be motor or wiring problems which are best handled by a professional. If it smells ...

Ad

Question about Rainbow Vacuums

1 Answer

...but smell like a burning belt If it smells like burning rubber, the belt is probably worn and slipping. If it's another burning smell, your motor windings are probably shorting and will burn out ...

Ad

burning smell. if its a rubber burning smell check the belt and the brushroll. if its an electrical burning smell then dont use it. the motor is overheating and will eventually get hot enough to catch

Question about Vacuums

1 Answer

Burning smell, have used once & ok but now burning smell when I start vacuum Burning smell from a vacuum usually comes from the belt....check for any objects caught between the belt and the brush roll

Question about Sebo Vacuums

1 Answer

...burning smell My 9yr old sebo has died. Was working fine, but then went off quite suddenly. A strong burning smell (like hot oil / metal). Replaced the fuse in the plug (this fused at the same time) ...

Question about Vacuums

1 Answer

...smell a burning smell and shut it off. Is the pump gone? Depends, if the the smell was like rubber, then it may be the pump belt. If it is ok, then the pump could be bad, altho the pump wouldn't have ...

...Burning rubber smell means the brush belt need attention. Make sure the brush is turning freely and replace the belt Eureka 4481 very loud. Already replaced belt. Any suggestions as to what problem ...

Question about Rainbow Vacuums

1 Answer

Burning Smell Hi, I have a Rainbow E series that when I run the vacuum there is a burning smell. I have cleaned the entire unit and filter but still have the smell? I am afraid that the motor will ...

Question about Bissell Vacuums

1 Answer

...the brush roll is free not sticky..Next is the belt okay, not jamming on the brush roll making the burning smell...You could take off the roll and run motor on its own ..finding out if its the

Question about Hoover Vacuums

2 Answers

...burning smell There are two reason you could be smelling a burning smell- 1. The belt is too stretched out and needs to be replaced. This causes it to slip when the vacuum is on and will create that ...

Not finding what you are looking for?
Windsor SR12 Sensor Bagged Upright Vacuum Logo

86 questions posted

Ask a Question

Usually answered in minutes!

Top Windsor Vacuums Experts

Mike

Level 3 Expert

4363 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Raymond Richards
Raymond Richards

Level 3 Expert

407 Answers

Are you a Windsor Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...