KitchenAid K45SS Classic Stand Mixer "adjust speed" Questions

Ad

Question about Food Mixers

1 Answer

adjust screws in the back of the mixer (with the cover off). Any ideas? If it has suddenly got high speed all the time and the two adjustment screws at the top of the speed control board are not loose

Ad

Question about Kenwood Food Mixers

1 Answer

Kenwood Chef - slowest speed I recall adjusting the speed controller to reduce the minimum speed - but cannot remember how (my neighbour at the time was a Kenwood engineer!) Model A701A - bought early

Ad

Question about Food Mixers

2 Answers

sunbeam deluxe mixmaster Speed control adjustment is loose on one side and when it moves away from mixer the motor speeds way up. If I hold it in place the speed adjusts normally. How can I fix it? I ...

Question about KitchenAid Food Mixers

1 Answer

...adjust the speed control switch under the rear dome or you need to replace the switch, I think you can find on YouTube videos on how to adjust speed control switch and the part is easily available on ...

Question about KitchenAid Food Mixers

1 Answer

...adjust the speed, but that turned out to be impossible. No matter how carefully I adjusted the screws I could not reduce Stir speed below than about twice the normal. All 10 speeds work (there is ...

Question about KitchenAid Food Mixers

3 Answers

...adjust the speed screws, the bottom adjustment screw is only used for speed settings over speed 6 setting.  My K5-A was doing this too, and after much trial and error, we determined that the ...

Question about KitchenAid Food Mixers

1 Answer

...gear if it was bad. I agree with the guest above in that it sounds like the retaining nuts on the adjusting screws of the speed control board have worked themselves loose and the adjustment screws ...

Question about KitchenAid Food Mixers

1 Answer

...speed 10. Is this something I can adjust on my own? Ideally you need to fix what's bent and that normally would involve splitting the cases to get at and repair or change the speed control lever. If ...

Question about KitchenAid Food Mixers

2 Answers

speed one, and adjust the top screws evenly to give the planetary 13 to 15 revolutions in 15 seconds. Lock the screws up with the lock nuts. The screw at the bottom is then adjusted so that it gives a

...adjust the speed. Please make sure not to over tighten or loosen these screws as it can damage the speed control plate! You should not have to mess with any wires attached to the speed control plate ...

Not finding what you are looking for?
KitchenAid K45SS Classic Stand Mixer Logo

613 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

198 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...