KitchenAid K45SS Classic Stand Mixer "lever stuck" Questions

Ad

Question about KitchenAid Food Mixers

1 Answer

...lever stuck Hello Janet, if your speed lever / switch is stuck something inside is broke. A new speed lever assembly is available on the internet or ebay for about 18 dollars, to replace it will take ...

Ad

Question about KitchenAid Food Mixers

1 Answer

...stuck lever. Open the mixer up and see what is going on. The other requires more effort. Again, opening things up is the first step. This time, however, simply removing the back cover should do. The ...

Ad

Question about KitchenAid Food Mixers

1 Answer

...Lever stuck in locked position Get a copy of the Repair Part List of your model from Kitchenaid.com Remove the Motor Housing (1). The Latch Lever (3) is connected to the Latch (10) and held in place ...

Question about Kenwood Food Mixers

3 Answers

lever may be stuck by food so you should be firm with it. take care. hi, You can release the plastic wheel by rotaing it to the clockwise direction by holding the shaft with a plair. Remember you have

lever slowly, manually moving something in the machine, and feel a click when it gets in the next gear, at which point the handle has some give to it, and can jiggle easily. On the a200, the handle is

Question about Food Mixers

1 Answer

on off lever stuck There is more than one food mixer in the whole world. What brand? What model?

Question about KitchenAid Food Mixers

1 Answer

lever stuck. What do I do? My stand mixer will not turn off. I had to unplug it. It is stuck on 2. It will go all the way up but not off. It has been sticking the last few times I used it but today it

a flat screwdriver and a hammer.....carefully. Then you can get a couple of flat screwdrivers in as levers between the now visible screw heads and the planetary

Question about KitchenAid Food Mixers

1 Answer

...speed. Moving the lever has no effect on the speed. Speed control plate at the back is stuck in the high position or you need a new phase board. That's the small PCB under the back cover at the

lever is stuck. Take the motor off the pedestal, remove the planetary and undo the 9 screws that hold the bottom gearcase to the top housing. You will need to unplug the white and the black wires from

Not finding what you are looking for?
KitchenAid K45SS Classic Stand Mixer Logo

613 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

185 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...