KitchenAid K45SS Classic Stand Mixer "remove groove pin" Questions

Ad

...remove the collar, spring and groove pin if you?d like to give it a try. You will need a punch drive with a smaller diameter than the groove pin, a hammer, steady hands and plenty of patience. Tilt ...

Ad

Question about KitchenAid Food Mixers

3 Answers

...remove the collar, spring and groove pin if you?d like to give it a try. You will need a punch drive with a smaller diameter than the groove pin, a hammer, steady hands and plenty of patience. Tilt ...

Ad

...remove all the residual grease from the 18 tooth Agitator Shaft Pinion Gear (Illus. No. 47), which should expose a Retaining Clip (Illus. No. 61), which will need to be removed. With the Retaining ...

...groove pin and I'm not able to clearly understand the way to follow in order to take out the damaged part for replacement. I just pulled out the cup and the planetary taper pin. After that the ...

...pin had come out of it's groove. Need to slide the snap ring back up in the groove. It may need to have food particles removed from the groove first before it can seat inside.

See picture of ...

Question about KitchenAid Food Mixers

3 Answers

remove any food residue. -Tha Mp3 Doctor My Kitchenaid 6000HD mixer had the flat beater blade stuck onto the turning drive-shaft and would not move up, down, or sideways - like it was tack welded onto

Question about KitchenAid Food Mixers

1 Answer

groove pin removal I am trying to remove the planetary from our kitchen aid mixer and I've found lots of great resources with videos etc showing how to do this. The problem I am having is that

Question about KitchenAid Food Mixers

1 Answer

access gears?? how can i get to the gears? i removed the two screws on the bottom, but no luck still. Take off the drift cup then remove the grooved pin that holds the planetary onto the center shaft.

Question about KitchenAid Food Mixers

1 Answer

...remove the metal collar from the beater shaft? You need a small steel hammer and a pin punch. Do not try to drive out the Groove Pin any other way (i.e. don't force it out with a regular size ...

Question about KitchenAid Food Mixers

1 Answer

remove the groove pin, you?ll need a small diameter punch (smaller than the diameter of the groove pin) to drive the pin from the agitator shaft. You will need the Parts List manual on hand. If you're

Not finding what you are looking for?
KitchenAid K45SS Classic Stand Mixer Logo

613 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

189 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...