KitchenAid K45SS Classic Stand Mixer "speed control" Questions

Ad

Question about KitchenAid Food Mixers

1 Answer

speed control and look at the speed control plate while operating the speed lever. Make sure the lever is moving the plate in and out. If yes then I would replace the small PCB above the control plate

Ad

Question about KitchenAid Food Mixers

1 Answer

...speed control works: Speed Control The speed control of the mixer is attained through the use of a governor assembly mounted at the rear of the control plate assembly. The electrical circuit is made ...

Ad

Question about KitchenAid Food Mixers

1 Answer

speed control plate and a governor for speed control. the governor rarely goes out the phase control board is a likely culprit but the system would work only in high gear if it was

Question about KitchenAid Food Mixers

1 Answer

...Speed Control lever is linked to the Speed Link mechanism, which in turn moves the Speed Control Assembly to allow the motor to operate at different speeds. Get a Repair Part List from Kitchenaid.com ...

...been fiddling about with the speed control adjustments? Possibly the small 4 wire PCB above the black control plate is unwell although normally it would give completely dead or every speed high

speed control board. There is a primitive switch there operated by a shaft from your speed control lever. You may find the switch is not activating until it gets right up to speed 10. Have you checked

Question about Gourmet Grade Food Mixers

1 Answer

...speed control. Its likely that the speed control mechanism ( probably an electric one has been damaged due to ailing parts). Likely component which may fail over time are electrolyte capacitors. Take ...

My mixer will only work on high speed why Speed controllers reduce the power provided to the mixer motor and have to "soak up" some of the power not used. If the mixer was used on low speed but heavy ...

...speed control board is stuck The switch on the phase control board/speed control board on my KitchenAid Classic Stand Mixer (max watt 250) is stuck on the "10" speed and it will not budge. The mixer ...

...speed control to find a broken cord. I can get the appliance apart but cant get the speed control out. Checked continuity of motor good. one of the power leads going to the speed control has a break. ...

Not finding what you are looking for?
KitchenAid K45SS Classic Stand Mixer Logo

613 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

169 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...