KitchenAid KSM90 Ultra Power Series Stand Mixer "mixer head falling" Questions

Ad

Question about KitchenAid Food Mixers

1 Answer

mixer before we give any advise, next what head falls off, the planetary if so then i will assume that you have an accolade professional or pro series or pro 600 mixer, in which case you need to order

Ad

Question about KitchenAid Food Mixers

1 Answer

...hub fall out top of mixer head will not say in gears Here's a link to the mixer's Service Manual: ...

Ad

...head onto the base. if it fell out then the answer is simple. Turn the mixer upside down and wiggle the base while sliding the pin back in. Once the pin is back in place, there is a set screw in the ...

Question about KitchenAid Food Mixers

3 Answers

head housing. Lift up on the motor housing to remove it. The motor/gear housing is the top protion of the mixer. Its loaded with grease so do this over a covered countertop or some place easy to clean

Question about KitchenAid Food Mixers

1 Answer

Kiitchenaid artisan head will tilt but wont stay up On the same side as the head lock lever at the back of the pedestal there is normally a small plastic part that the locking lever can hook under. It

Question about KitchenAid Food Mixers

2 Answers

...head on the mixer keeps falling off. how do you get it to stay on? it comes off when were mixing. The Planetary plate comes attached to the shaft from the factory. It is not supposed to get loose and ...

mixer is dropping black flecks (pepper like) into the mixture. Any ideas on how to fix this? It appears something is wearing in the head and debris in falling into the mixture. You will need to remove

Question about KitchenAid Food Mixers

1 Answer

...mixer with terrific results and also, with your help, completed a much needed cleaning, regreasing and maintenance update. For all of that I am stuck on the last piece. How do I get the silver ring ...

...mixer jump, vibrate and shimmy til it almost falls off my counter top. I've tried to tighten up some of the screws, and now I think I have just made it worse. Any ideas would be greatly appreciated. ...

head will tilt without falling down Tip it upside down on a towel. Look deep inside the pedestal where the hinge pin goes through. Right in the middle there is a single headless screw, undo it 2 turns

Not finding what you are looking for?
KitchenAid KSM90 Ultra Power Series Stand Mixer Logo

348 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

169 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...